High-Pressure Fork/Shock Pump (300 psi Max)

I needed a high-pressure, small increment pump for mountain bike suspension forks. The RockShox High-Pressure Fork/Shock Pump (300 psi Max) worked perfectly for what I needed. It connects to the fork Schrader valve perfectly, can handle high pressures, adds only a tiny amount at a time, has an accurate gauge, swivels nicely, has a bleeder button to reduce pressure, and feels like a high quality item that is going to last a long time.

Very good quality good pump you can actually see how much air you actually have

For some reason I was worried this wouldn’t work well, but first it feels really high quality. It also seems consistent with the readings, and it helped me dial in my mtb suspension to my liking. Just get this shock pump and stop looking for one because apparently fox is not a good one but this worked well for me.

The pump does an OK job reaching upper pressure. The pump handle ergonomics needs some work. The handle becomes a little uncomfortable and hard to hold onto at higher pressures. But the pump is light weight and small enough for your daypack. It's built solid with a metal body, big dial and a hose that's just long enough to reach and not become obstructed while pumping. In all a good pump at a really good price.

Pay once, cry once.” At least, that’s how it should’ve gone. Not me. I had to learn the hard way. This is my third shock pump (different brands before), because I went cheap the last two times. Finally pulled the trigger on this one, and it’s hands down the best decision I’ve made. The build quality blows the others away, and it worked flawlessly on both of my MTBs. Best value for the money. Easy to use.

It just works. Minimal air loss when removing. Nice and compact, seems sturdy.

This pump is precise, solid, and gives me full control of my suspension setup. Compact enough to toss in a bag, accurate enough for trail tuning. Locks tight, releases clean—no air hiss drama. Total suspension game-changer.

Great pump for high pressure shocks, saw some reviews that said it didn’t have a bleed of but the one I received does. Been great to bring along on the trail for quick adjustments on front and rear shocks- would work in a pinch for tires but it’s high pressure low volume so would take a hot minute. Doesn’t loose much air attaching and removing- just the volume of the hose but no bleed by by the depressor witch is nice for fine too if- hose volume looses about 6 psi for a rear shock so I go 6 over target

è la prima volta che uso una pompa per forcelle da quando ho comprato la prima MTB con rockshox ad aria quindi non posso fare comparative con altre pompe ad alta pressione ma questa devo dire che è riuscita a fare il suo lavoro. il corpo della pompa è in metallo opaco tranne il manometro in metallo lucido e ovviamente il tubo in gomma, sembra quindi resistente e non è assolutamente una cinesata di bassa qualità. anche il raccordo è in metallo e c'è da dire che se non lo si sforza un po' dopo la fine della corsa potrebbe darsi che non si riesca a premere la valvola della camera da gonfiare, ma sembra normale perchè la guarnizione interna al raccordo della gomma perderebbe aria se non fosse accoppiata con forza alla valvola della camera. Il raccordo è fatto in modo da non perdere troppa aria svitandolo anche lentamente (cosa che succedeva quando ho provato a gonfiare con il compressore da auto con attacco a vite). è presente una valvola per abbassare la pressione dal lato opposto del manometro e la forza da utilizzare per pompare anche a pressioni elevate è poca.

Solid construction

Su funcionamiento es fácil e intuitivo. Es ligera pero se nota de materiales de buena calidad. El medidos integrado es de rápida lectura y el diseño facilita el uso. Hasta el momento funciona a la perfección con una RockShox Recon Silver Air.

Ich habe die RockShox Federgabel Dämpferpumpe gekauft und bin absolut begeistert von ihrer Leistung. Universelle Kompatibilität: Diese Pumpe ist perfekt für alle RockShox Federgabeln und Dämpfer geeignet. Egal, welches Modell ich benutze, die Pumpe passt immer und funktioniert einwandfrei. Hoher Druck: Mit einer Kapazität von bis zu 20 bar (300 psi) kann ich den Druck meiner Federgabel und Dämpfer genau einstellen. Das ist besonders wichtig für eine optimale Performance auf verschiedenen Trails. Präzise Druckeinstellung: Das analoge Manometer und der Luftablassknopf ermöglichen eine exakte Druckeinstellung. Ich kann den Druck genau nach meinen Bedürfnissen anpassen, was die Fahrtqualität erheblich verbessert. Robust und leicht: Die Pumpe ist aus hochwertigem Aluminium gefertigt, was sie sowohl robust als auch leicht macht. Sie ist einfach zu transportieren und hält auch rauen Bedingungen stand. Insgesamt eine hervorragende Dämpferpumpe, die ich jedem Mountainbiker empfehlen kann. Sie ist zuverlässig, präzise und einfach zu bedienen. Ein absolutes Muss für jeden, der das Beste aus seiner Federgabel und seinen Dämpfern herausholen möchte!

…