LASOA Acrylic Display Case for Collectibles, Alternative Glass Display Box with Mirrored, Self-Assembly Clear Storage Showcase for Figurine Memorabilia (4x4x4inch;10x10x10cm)

So this box is pretty easy to assemble and user friendly as far as putting it together goes, no directions needed. The box is sturdy and displays my geode wonderfully (especially with the mirrored bottom and back panels, which are high quality). The only issue is removing the protective films that are on the front and back of every panel. They give you a little tool to do it (a small circle of acrylic), it doesn't help. For me, it was much easier to use a thin blade knife to peel up the corner and then pull the whole film off, but it is a tedious process that can take some time. If they would have just extended the protective film slightly over the edges, this would have been SO much easier. Either way, once you have the film pulled off, it's super simple to snap together and seals well. I've only had it together for a week or so, but so far, no dust or pet hair has made its way inside! I hope that remains the case! They provide some cheap white gloves to wear while you are putting it together, which were quite helpful in keeping it free of fingerprints on the in and outside of the box. I recommend this box if you are looking for a display case for any item that holds value to you. I used mine on a geode that I just love and it looks amazing! Thinking of buying some more for my other geodes so they can all sparkle and shine dust free!

It’s exactly what I needed for my wedding shoes! The mirror is great! It is not the sturdiest but if you put it in a place that people won’t be bumping into it then you are fine! It’s just as advertised. Overall happy. It even comes with globes to assemble it so you don’t put your fingerprints all over it!

This was not difficult to assemble as long as you had the pieces rotated in the correct direction which the directions do not tell you about. The worst part of this was getting the plastic coating off. It was fustrating. They could easily have put a tab on it to grab it and pull it off but I had to use a sharp knife and peel the edge until it finally lifted and was hoping that I didn’t scratch the acrylic.I didn’t want to spend more money or I would have bought one where it was a cube that just slides over the base

i purchased to display a rather rare doll. case was in pieces, had to assemble. pieces were not cut to fit in their assigned slots, making assembly very difficult. managed to get it kind of together and went to put the top on. it slid away from me, and as it did so, it broke all the bottom tabs off as the sides fell. so now all i had was some expensive garbage.....very disappointed.

The media could not be loaded.  I must admit, I saw a few reviews (after I bought it) saying the top plate didn’t fit and thought “it’d better fit!” And it does. It only fits one way so… if the tabs don’t match up, turn it around 😉 The mirrored pieces are perfect mirrors, and all the pieces came with a nice thick plastic on them to help protect them until they get to you. Use the gloves, to avoid scratching/finger printing up the surfaces and you will be pleased😁Pieces fit together so nice and tight that they almost snap in place, so be gentle and apply even pressure where you can.I am thoroughly pleased with this case. don’t mind any 1 star reviews, most of them just didn’t understand how to assemble it, Or didn’t remove both sides of the plastic coating. Once all pieces are snapped together everything is nice and sturdy, and crystal clear.Well worth the money. 👍

I like that the mirrors are really nice and the lucite is really clear. I (the wife) put this together myself my husband peeled the backing off each piece that made the process easy. He has huge hands I didn’t want to take the chance of him popping it. I indeed read a lot of the reviews and they had me kinda nervous, but didn’t deter me. The case is pretty easy to put together, if the notches don’t line up just rotate the plate and try again. It will all align perfectly just follow the directions. I’m happy I purchased. FYI: this is a personalized mug that’s why I covered the name.

My picture does not do it justice. It looks amazing in person, so I would give it five stars on that. I found it pretty simple to put together. Once you push the slots together, it holds together well. I do think an elderly person or someone not adept at Legos would struggle with putting it together (and scraping off the film.) The bad side is that a piece of the acrylic cracked when I was putting it together. It also came with a strand of fairy lights, which was a nice surprise to me - but those didn’t work unless you wiggle the wire just so.

Lots of people said this was hard to put together but I found it to be very easy. Getting the film off was the hardest, they send a little round plastic tool that you put on the very corner of each piece and slide it up with some force to grab the film and move it back. It made things easier once I got the hang of the tool. The pieces snapped right together for me, no issues of other sides falling down, very simple!! This included a little set of fairy lights, that was surprise but, I did not use them however as they kinda made my art piece look cheap which it is not. I loved the white gloves to keep finger prints off that helps so much!! Overall I’m very happy with this case and if needed I would purchase more of these for my future are work.

Easy to put together took me 10 min and makes my piece look even better

Good display case

Assembly isn't as bad as reviews claim so long as you're patient and do it in a clean environment. I've got Mando with Grogu in there and they look awesome.

It won't stay assmebled, it may work if you crazy glue the pieces together.

Its definitely cheap. I put it together before taking off the protective covers and kinda got snug but after I took it off it would fall apart I used crazy glue to keep it together except for the top so I can open it. Its not a to bad of a product it did crack on me when I had a hard time putting it together