Spigen ProFlex EZ Fit Screen Protector for Apple Watch 6/5 / 4 / SE (2022/2020) (44mm) - 2 Pack

I’ve held off on reviewing these due to the negative reviews stating bubbles after a few days. Two weeks in and mine is still bubble free and doing a Fantastic job of protecting my screen. You need to be patient applying it, I did have a small bubble in the centre after I initially applied the protector, which I mostly removed with a bit of massaging, it completely disappeared after an hour or so following that.

This product fits well and will definitely protect the 41mm Apple SE2 watch expect nothing less from spigen used them for all my tech 👌 It’s easy to install and has good edge to edge protection Box comes with Mounting guide Cloth Alcohol wipe Mini squeegee 4 anti static stickers 2x screen protectors Only thing is When used with the spigen rugged armour case it’s a bit of a hit and miss Most of the time it will be fine but every now and then the case will shift slightly when taking a bag off your shoulders for example and catches the edge of the protector lifting it from the watch Not the end of the world but something to be careful of

Wasn’t very good was constantly falling off my watch screen after 2 days tried twice didn’t work both times. Too small of an area and the edges are too vunerable and protruding causing it to catch and the screen protector lifting up making bubbles under and it just falling off. Wouldn’t buy again was really hoping this would be good as Apple Watch SE screen is very prone to scratching but sadly am pretty disappointed as it didn’t work at all. Didn’t even last a week.

It went on very well, first time, with no air bubbles. So I was pleased with that, but my major gripe is that the oleophobic coating is rubbish. It gets smeary quite easily and under certain light you can see a weird oil-spotting pattern, which detracts from an otherwise decent product. Edit: It eventually came off and I haven’t replaced it (even though I still have a spare one). The screen sensitivity is much better without it.

You’d think being the clumsy sort of person who seems to lack the ability to walk through doors without whacking themselves on something, the first thing I’d do when getting a beautiful new Apple Watch for Christmas would be ensconce it in protective layers… but no. For whatever reason (stupidity) I did not and whack myself in doors I did. Many times. To the extent that my beautiful Apple Watch began to resemble a skateboard ramp rather than the precision time piece it ought to be. Worst of all, I chipped the corner - see photographic hall of shame! Enter Spigen - a brand I have trusted my iDevices to since the lofty days of my iPhone 3 (remember those bricks!) Despite the bad reviews here - clearly there must be a bit of inconsistency across the quality control - I got a pack of two screen protectors with the nifty placement gadget. This was delivered at approximately 14:38pm today and as you can see by the picture on my screen, it was installed in mere minutes. Zero bubbles, AND it fits neatly under the slim fit case I bought to protect the outer edges the other day. I am understandably delighted. It’s covered the scratches although if you peer at it closely you can still see them, so… just don’t peer closely at my watch. But happily it’s covered the chipped corner and hasn’t obscured the screen in the process. The touch screen doesn’t seem to have been effected and my watch doesn’t now look like some sort of toy with a bumper on it! As with all these things time will tell. I’ve not done the washing up to see how it copes with being splashed and I’ve not walked through any doors yet… so, we shall see if it stands a true test. Spigen is a bit expensive, but, when you consider the cost of the watch and the fact that apple don’t offer a repair service, they just swap you a new watch, setting you back an arm, a leg and a kidney, it’s money well spent. I’m hoping this will preserve my watch in its current skate ramp state and prevent it from reaching hip hop DJ scratch level. Thumbs up Spigen! 8 months later - I’ve just changed my watch face protector for the second of the two in the pack - the first one having reached an unacceptable level of battered. Seems to be the edges of the watch face, where it curves, that takes the brunt of the beatings. But, the watch face is now covered in a new protective layer and is back to looking good. The protector was a Bit tricky to remove. It seemed to have stuck itself quite firmly after 8 months. However, that cleaned up really easily with a screen wipe and the gadget for positioning worked well again. Still a winner and good to go for another 8 months I hope.

I bought this for my new Apple Watch SE2, having seen a good video review on YouTube, and having previous bought Spigen products. It's well made, easy to apply, and I followed the instructions carefully. There was no dust on the screen, and yet I've ended up with matching bubbles at each corner (see photo). I've tried gently lifting the corners with a nail and pressing them down, to no avail. So it doesn't quite fit the curvature of the screen. Whilst annoying, it does work perfectly despite this. Shame because. it's well packaged, easy to apply and functional otherwise.

I read all the reviews, mostly not too good, but went ahead anyway because I have a Spigen screen protector on my iPhone 12 and it went on like a dream with no bubbles or any other problems. The price was a little high but then I’ve always believed you get what you pay for. The screen protector arrived the day after ordering so I unpacked it and watched the video three times to make sure I had understood everything properly. I did everything as instructed and the screen protector went on like a dream with no bubbles at all. You just cannot see it once it’s on. I don’t know if I was just lucky but all I would say was watch the installation video more than once and follow the instructions exactly. Also, when you use the squeegee to firm down the product, go from the edge upwards and NOT from the middle.

Overpriced for what they are. £16 odd for two small plastic screen protectors and the first one ende dup in the bin because of a small bubble on install that I couldn't get rid off despite carefully following their video instructions. Maybe worth £5 at best. Just bought my wife a 40mm watch and see these cost even more for the 40mm version. Think I'll look elsewhere Thanks.

Perfekte Passung als Folie für die Apple Watch. Ich habe diese Folie schon lange in Gebrauch und muss sie nur jedes halbe Jahr wegen größeren Schrammen austauschen. Die Aufbringhilfe ist auch super und macht das Anbringen sehr einfach.

This is probably only the second time I’m reviewing a product on Amazon. So that in itself should tell you how happy I am with Spigen. I bought the watch only a week and a half back, and I managed to get a deep scratch on the top of the screen, as you can see in the first picture. As any new Apple product, any sort of damage, no matter how small or insignificant it may seem, hurts! I couldn’t stop looking at that scratch all day and feel bummed out! I immediately regretted not buying a protector sooner. I looked on Amazon and went for Spigen be a I use the same brand for my iPhone 12 Pro Max screen protector and that’s also a fine product. It arrived within 2 days (in Goa, which is quick). The application process was smooth. I got done within 5 minutes. With no bubbles and a perfect alignment - thanks to the application guard it comes with. All-in-all, it was a very good experience! And as you can see in the second picture, the screen protector neatly covered the scratch! Double win!

Excellent quality as usual.

過去使用してきた中で最高の貼り具合です☆ 2枚入りで１年経ちますがまだ1枚目から貼り替えしてません。コレを貼った上でフルステンレスのケースバンドを使用しておりますが貼っているのが判らないレベルです。品質最高☆機種変しても同ブランドの製品を探そうと思います！

Excelente Producto! Calidad superior, lo coloque en Watch SE 3 44 MM , Con funda Spigen Rugged Armor y va de lujo !!!