Smith’s 50603 Handheld Lawn Mower Blade Sharpener - Oversized Handle & Large Safety Guard - Durable Plastic - Easy to Use - Wire Cleaning Brush - Preset Carbide Blade - Gardening Lawn Care Tools

The media could not be loaded. As someone who has been sharpening mower blades for over 20 years (I used to have a landscaping company called "The Sod Squad"), I swear by this mower blade sharpener. This is because of two reasons: the handle design is very easy to use (no risk of cutting yourself), and the actual design of the sharpener (one carbide side and one guide) is specific to mower blades. The sharpener works very well.Mower blades are not knives, so you don't need to put a bevel on both sides of the blade. You also don't need to get them razor sharp. Instead, a mower blade just has a single bevel, and this is why this sharpener is ideal. It's true that you CAN sharpen your mower blade with a file. But it's way easier and faster to just swipe the blade with this sharpener.░░░ A FEW NOTES AFTER YEARS OF WORKING ON MOWERS ░░░1. If your blade is really old and beat up, you may need to take some of the dings out of it with a file. That will be determined by how many rocks and sprinkler heads that you've hit.2. While it's tempting to try to sharpen the blade while it's still on the mower, don't. It's way, way easier to take the blade off and sharpen it. Plus, you'll do a better job.3. If you don't have a bench vise to clamp your blade into when sharpening, just use a couple of 2x4s screwed together to hold the blade in place.4. If you really want a well-running mower, use a blade balancer like this one: Oregon Lawn Mower Blade Balancer 42-100. Balancing the blade is not essential for homeowners and few people do this, but it's ideal if you're mowing a lot commercially or just really into having a fine-tuned mower.5. A razor sharp mower blade is really overkill, because you're just cutting grass. So my advice would be to not obsess about getting a perfectly sharp blade. This sharpener will get it plenty sharp.6. Regular sharpening, like every season or even twice a season, will keep the blade nice and sharp. If you let it get too dull it'll be hard to sharpen (like after several years).So it's a nice design with the built-in brush and sharpener angle. I strongly recommend it..................This product was NOT given to me as part of any promotion. I bought it after doing some comparison shopping and this review is entirely the result of my own opinions and use of the product.

It did a good job of sharpening the mower blade. It took less effort and time than using a file as I had been doing.

Was a little bit hard to get the feel of it and the right position. But after I got it to work right it did a fine job. Yes I would but it again

Ok so this did the job on my Oregon blades. Made them very sharp and the lawn cut extremely well. However I recommend two of these products purchased at once. You see the angle of the blade was different then the set angle of the sharpener. Even though this product cut right through with little effort it dulled considerably before the last edge of the second blade and my second blade could not get as sharp as the first. Much of the carbide was wasted grinding the bevel angle. So if I had two the first would change the bevel angle of the blade and the second would blow through and fine tune the edge. From here out though I should have no issues as the grind of my blades are now set. ( I may have to grind chips out once in a while with the wheel) I did order a second set direct from Smiths as it’s considerably cheaper. But these did sharpen very well I am impressed. Minus one star because the sharpener couldn’t make it through one session. Minus one star because I couldn’t just order the replacement carbide piece.

I was tempted to buy one of those sharpening stones that uses a drill. But then I saw a YouTube video reviewing this hand-held sharpener and that changed my mind. I ordered this along with a new mower blade thru Amazon. The new blade was painted (?) even on the cutting edges. I used this to remove the paint and put a sharp edge on the new blade in less than 5 minutes. It was very easy to see the sharpening action as it removed the paint from the blade edges. The wire brush is helpful but not super-durable, as I ordered the sharpener first to try and revive my old blade, but after wire-brushing it discovered cracks that made the blade unsafe to continue using. The bristles on the brush got bent pretty easily. Still handy to have it. Especially for the price and ease of use, I'd recommend this all day vs. those drill-mounted grinding stones.

I’m a 14 acres of lawn. Taking the lawnmower blades off to have them sharpened by someone else takes 48 hours. With this device, I can sharpen my blades in two hours. very good value for the money. I recommend this device for people who can take their blades off themselves.

I've used this for a couple years now and wanted to let everyone know I think it is incredible. It is easy to use and my young kids love helping me through the entire process of removing the blade, sharpening, and securing the blade. It's my first landscaping every March, my unoffical arrival of spring tradition. I recommend this tool to anyone looking for a cost effective solution.

This is a good product for people who don't have an assortment of tools or a garage to complete routine work. The sharpener works well with little effort and provides an even finish on the blade.