HornitCLUG Bike Clip Indoor & Outdoor Bicycle Storage Rack & Mount System, 5 Sizes, Easy to install

I have two CLUGs... a "MTB 44-57mm" for my bike with 2.1"W tires and a "MTB XL 58-69mm" for my 2.6"W tires. CLUGs make storage a breeze! Sooo much floor space saved!! And honestly it's super attractive storage - I enjoy seeing the bikes there. Snapping the front tires in place and popping them out is super easy. I did listen to the reviews that said not to place CLUGs in a high traffic area, because the bike can get knocked askew. This is true - but I wouldn't want it to lock onto my bike so hard that damage is caused if I then crash into the bike while walking or carrying something! The CLUGs work perfect in the corner of my room. They also mount very securely to the wall. Would've been a breeze to mount with two people... someone to hold the guide in place. Unfortunately I didn't have help, but it was still manageable. The box comes with an AWESOME guide built right in to help you place your screws into the right spot. I can't imagine not having CLUGs now that I've experienced them! It's such simple storage!! Gives bikes their own space without bumping against anything or tipping and getting damaged. Also, the upright storage position is good for suspension in the forks... GearHooks says it well here: "If the bike is stored vertically on the wall, the forks are tilted backwards. This means that the oil in the forks runs backwards and pools against the foam seals. This keeps the seals properly lubricated and stops them drying out." All in all these CLUGs are one of my favorite purchases ever!

Bought this for my husbands bike. It was very easy to put together! Love that the sides of the box help you measure the tires as I was unsure if I got the right size. Also, it comes with a hanging guide. I used my screwdriver to poke holes in it, made some measurements, put the guide up and colored in the holes. From there it was a breeze! Seems sturdy and helps save so much space.

Almost returned this bc bike kept tipping over when using it to hold my bike horizontally. Thankfully a YouTube video helped. I had it placed right at the point where my bike makes contact with the wall. I placed it higher, almost 6 inches higher then the spot where my tire touches. When placed right at the height of tire to wall contact the bike will be wonky and tip over. When I moved it up several inches now as soon as it slides in it’s snug. It was so loose/wobbly at first that I thought I bought the wrong size but it was just too low. Overall pretty solid. I’m removing a star because of you don’t have a wall stud where you need it the provider screw anchors won’t hold on hard enough to the drywall. I had to use “butterfly” drywall screw anchors.

Worked great and easy to install. I used one on each tire for extra hold.

At first, I thought this product was going to be great. But the tire didn't fit quite right - it kept leaning even though I got the right size for my bike. Over time, it started putting too much pressure on the mount and wall, which made the mount weak and damaged the wall. Eventually, my bike just fell out of it. Now, I have to get a new mount to replace it.

Easy to install. Small and easy to use. Looks great.Be sure you keep your tire inflated so not great if you don’t use your bike fairly often, check tire pressure like once per month.Install in a place where your rear tire touches the floor

These bike holders are cool in concept but the product itself is cheap junk and will most certainly break very quickly with moderate/consistent use.I think if you can find the sweet spot of your specific tire size married up with one of these products it has the potential to work for a while - but it’ll break, I guarantee it. I tried picking these up for my older sons to use in our garage - they ride mountain bikes without kick stands so some sort of bike storage system was desperately needed that was easy to use for them. Both of their bikes have “Plus tires” which are stated at 2.6” wide. I tried the MTB XL as well as the MTB standard CLUGS hoping one would work. The XL was way too big and the bikes wouldn’t stand up and the standard size was way too small - so much so that when I was able to force the wheel inside the CLUG, every other time the inner plastic piece would separate from the outer plastic piece. It was about 5 more repetitions from cracking and breaking for good. The plastic seems super brittle and while it seems thin enough to flex a bit, there’s no way these things are lasting more than a week especially with kids putting their bikes in and out.Bottom line is these may work temporarily for some users but if you plan to use them daily (meaning, bikes in and out constantly) don’t bet on them lasting very long.

Greta product, easy to install and helps saves space

Muy funcional y fácil instalación

Muy buen producto y además fácil instalación

Después de apenas 1 año de instalado, la.pieza que sostiene la llanta, se ha roto por completo. Tengo dos bicicletas instaladas en el.mismo ligar, una con un CLUG y esta última, en perfecto estado. El material de este soporte Hornit no es de calidad, inaceptable qué algo que sostiene bicicletas de alto valor se rompa de esta manera. No recomiendo este producto

Útil y fácil de instalar, lo único qué hay que tener en cuenta es que necesitarás poner algo para la llanta trasera que apoya en la pared si no quieres mancharla

Lindo práctico y fácil de instalar