Genie (Authentic) GSTB-R (STB-BL) Safe-T-Beam Replacement Kit, Safety Beams, Includes Sender & Receiver(GSTB-R), One Size, Black

During a recent electrical storm, a close lightning strike took out a few electronic devices in and around our home. One thing I noticed was that my Genie garage door opener was no longer functioning. The light would come on but the door would not go up or down. I checked the little LED lights, located on the Safe-T-Beam sensors by the garage door, and noticed that the red LED was blinking in a reoccurring pattern. I went to the Genie website and checked their support page. I was delighted to find a useful troubleshooting guide, which utilizes the LED lights on the Safe-T-Beam sensors to diagnose potential problems with your Genie garage door opener. This handy troubleshooting guide can be found here:[...]The guide helped me determine that my opener motor and electronics were OK but one or both of my Safe-T-Beam sensors were bad and needed to be replaced. I almost purchased the replacement kit from the Genie website but decided to check Amazon.com first. I'm glad I did, as I found the exact same kit at a much lower price.The Genie 34094R Garage Door Opener Replacement Safe-T-Beam Kit is the same as the previous 35048R kit, and is the perfect replacement for every Genie garage door opener that utilizes the Safe-T-Beam sensors (all models manufactured from 1995 to current). This easy to install replacement kit includes the following items:- Both Infrared eyes/sensors (one with Red LED and one with Green LED)- Two Safe-T-Beam sensor mounting brackets- Bell wire for connecting sensors to opener unit (approx. 100 ft. of wire included)- Mounting hardware (screws, washers & nuts) for brackets and sensors- Installation instructionsI did not need to replace the wire, as my previous wires were still in great shape. I found that I was not able to use my existing sensor mounting brackets, as the new Safe-T-Beam sensors had a slightly different mounting method. Luckily the 34094R kit comes with new mounting brackets (and everything else you would possibly need to install the new sensors). The installation instructions are very easy to read and understand, and provide several illustrations to help make the process simple. I had the new sensors installed in about 20 minutes and my Genie garage door opener was working perfectly once again.The 34094R Safe-T-Beam replacement kit is a genuine Genie service item and contains everything needed to replace the Safe-T-Beam sensors on all Genie garage door openers manufacturer on or after 1995. It is easy to install and works flawlessly. The cost is very reasonable and I highly recommend this product to anyone with a Genie opener that needs one or both Safe-T-Beam sensors replaced.

Easy to replace my dead sensors with these! Perfect size and fit and look better than the originals! Worked perfectly and on a great deal too

Perfect fitment and functionality. Replaced and aging set and works flawlessly.

We were having problems with our garage door not closing when direct sunlight was on it. Got a quote from a garage door company saying they would fix it for $200. Ordered these sensors and in 30 mins our problem was fixed for $40. Easy install and well worth the investment!

My garage door refused to go down. My red sensor was blinking 4 times. I replaced the red sensor with a new one from this set and my garage instantly started working again. I then replaced the green one just so it’ll be a matching pair. These are OEM so they worked perfectly.

Easy to install - remember to turn off the power at the circuit breaker box, see how the old beams are wired, then, remove the old beams one at at being careful as to which side had the green light and which the red light. The whole job took me less than 10 minutes. The old beams were not allowing the garage door to close - dimmed with age (12+ years old). Instantly, I could see how much brighter these are! Now garage door closes even with bright sun shining on the beams. Very pleased 😀

Different looking but works better.

Worked great as replacement eye for garage door.

They are as advertised, easy installation

Los instalé y oriente de forma muy rápida y sencilla.

Easy install on my existing Door opener. Works perfectly.

Tenia la inquietud si seria compatible con mi Genie de la década pasada, pero sin duda funciona a la perfección.El anterior sistema se daño por descuido mío y era el que se ocupaba fuera polarizado +/-Este nuevo no ocupa polarización al conectar y tenia la duda.Lo recomiendo

Arrived quickly and in good condition.