PC ProductsPC-Marine Epoxy Putty, 2oz Stick, White (25567)

I used this product to repair my watering can’s cracked screw on sprinkle cap (very old Rubbermaid watering can so no replacement cap is available). I was able to mold the putty around the outside of the damaged cap and once it hardened, sanded it smooth and re-drill the holes which allow the water to sprinkle out. You’d never know it wasn’t original and I now have a fully functional watering can!

Purchased this putty for an outdoor art project to seal up some piping. Has worked great! It's kept all water out of the tubes, even for the ends under dirt. I really appreciate how fast it starts to cure (15 minutes) and it truly is completely hard in an hour. Definitely recommend this product.

A couple/three years ago, I was looking to repair something that was chipped --- I needed the repair to adhere to the original object. This product was referred to me by a hardware store employee who used it regularly in his side hustle as an artist/sculptor. I've used it in a wide variety of ways ever since --- to repair things and to create things from scratch. Easy to cut off a chunk, knead it into a uniform consistency, and a decent work time. You can even sand it and paint it. I've bought it repeatedly and I love it!

The product is fine. The shipping took over 2 weeks. I am not sure if it was due to outside circumstances or just slow shipping from the seller.

Worked like a charm. Soft and pliable to apply, hardens to concrete strength. I didn't time it, but it was easily cured by the next day. Used UNDERWATER to seal inground pool gap. Was a little tricky to get it from floating off of the concrete surface I was working on, but it did stay after a patient minute.Strongly advise you wear gloves or apply with a tool, because it will take a while to remove the white residue from your bare hands if you opt not to. Regular soap and even garage goop didn't work, (although other compounds might have worked better)

Used for above ground pool that had a few holes and it works amazing! It is a little hard to mold into place under water but not too difficult just have to play with it for a few minutes to mold it and get it flat. I used patch kits and nothing worked so glad i bought this because i really did not want to empty the whole pool just to patch the holes. Also worked on the pump hose that sprung a hole. It is very hot where I live 120 degrees in the summer and upwards so its nice to have when the heat burns holes. Make sure to mix until both layers are like a whitish grey takes about 2 minutes just using my fingers.

The product mixed quickly and was user friendly.Set up and ready for the water in 15 minutes.

I noticed one of my kayaks appeared to have a slow leak that I could not locate by simple visual inspection. The bottom of the kayak had many scratches but I could not determine which scratch might be causing the leak. I feared I might have to throw away my favorite kayak. I elevated the kayak and poured water into it. I then saw water trickling out of a tiny scratch. I put the epoxy putty over the area of the scratch and sanded it down a little the next day. Once again, the kayak is water tight. The epoxy was simple to use and highly effective.