Spectre Performance Air Intake Kit: High Performance, Desgined to Increase Horsepower and Torque: Fits 2019 DODGE/RAM (1500) SPE-9090

Many people complained of the instructions but honestly if you have any Buisness installing a cold air intake yourself then you should be able to assemble this kit. It is straightforward and took only about 25 min from start to finish to assemble, remove old intake and install this new kit. Took it for a drive and instantly noted a better throttle response. Also noted a pleasant growl that added to my aftermarket exhaust but like the exhaust is quiet and calm when not on the throttle or pulling hard load. It looks good, filter is Massive for a small block engine and the velocity stacks is a nice addition and shows the manufacture actually put some effort into the design. You will like it of you are looking for a proper cold air intake.

Put this on my 2019 Ram 1/2 ton. Super easy to install. Only took me about 30 minutes. Can’t say it’s done much for my gas mileage, but it does sound nice when I stomp on the gas. It visually pleasing as well. No complaints with my purchase.

Easy to install, no cutting or drilling needed.I didn't even used the nice instruction that come with it.It was installed in within an hour.Nice sound when flooring the gas pedal.Feel better and sounds better.Under the hood looks better.

Installed in about an hour. Looks good. Sounds Good. Small bump in MPG. For the price its a great product.4 stars because the air temperature grommet is a little too small and it took significant work to get installed. It fell out while driving once until I was able to modify slightly to allow it to fit. The black and white instructions of a black box... You're basically buying a 4 piece puzzle so it takes a few guesses to get the air box together.

Easy to install looks and sounds good however the filter will not stay on. The piece that you slide the filter onto inside of the box is smooth and the filter will not stay on. Rather than going through the trouble of trying to find a different one I'm just going to throw a self-tapping screws through the clamp band into the mounting plate. At this point I would ask the manufacturer to do better.

Fits and looks nice. the tubing is almost to short. Needs about another 2 inches. You gotta fit everything and then tighten up you clamps. theres a high pitch whistle when you first accelerate. But my exhaust almost drowns it out

Save yourself time, spend a bit more money and buy a K&N or S&B Cold Air Intake. Don't risk purchasing this. I've sent emails to Spectre Performance asking for solutions, with no answer after 2 days.The filter slides away from the adapter inside the heat shield too easily. Before I finished attempting to install the pipe, it was already starting to slide off even with the clamps fully tightened. There are several reviews on Amazon with people having this same exact issue and Spectre still hasn't fixed the issue. It is VERY risky. If this filter came off during a drive, you wouldn't notice and your engine would be inhaling unfiltered air with dust and particles.The pipe I received was too short; it could of had more length to it. It barely reached to slide inside the adapters.I also think the position of the opening for the Temperature Sensor was not in the correct position, because my cable could not reach it, even with the pipe pushed all the way into the elbow attached to the throttle bottle. Pushing the pipe all the way into the elbow causes the other side to not reach the adapter going to the heat shield. Another reason why I determined the pipe was too short.Spectre Performance will not respond to my email that I sent 2 days ago explaining all this. So do not take the risk buying this.

Easily installed and sounds awesome

Does exactly what I wanted without the $500 price tag. Better throttle response and sounds mean when you’re on the gas. Filter does slide off easily if you don’t secure it. I used a couple dabs of tv silicone to hold it in place. No issues since. Used silicone instead of glue for easy removal when needed. All in all great product for the money.

El motor ahora suena como si no tuviera silenciador, no me gustó

Easy to assemble. Pretty obvious how it all goes together. Build the box with the hardware. Tighten bolts when they are all installed. Use grommets from your old unit. 20 to 25 minutes with a beverage. Sounds great with the mbrp extension pipe muffler installed to. 2022 ram limited

Great intake for the money and sounds fantastic. Don't know about fuel mileage as my foot is always down to the floor to hear it ROAR!READ THIS: the filter clamps onto a plastic bit that is smooth and tapers down. Because the filter is oil coated it will slide off no matter how you clamp it because of the smooth surface. This means you can be driving around with your air not filtered at all...The FIX: clean plastic bit and inside of filter clamping edge with spray 9 or similar to get ALL the oil off both. Then sand the outside edge of the plastic mount to get rid of the smooth plastic finish and give is some texture. Now clamp and forget!Enjoy!

Aside from the box being a bit of a challange to assemble, this unit was a breeze to install and fit perfectly in my 2021 Ram 1500 sport even though Amazon said it would not. The throttle response is definitely the biggest benefit. The truck roars to life when you get on the go peddle. Mines only been installed for a day so mileage is still unknown but I have to assume, driving normally, it can’t hurt it any