Dongar Dash Cam Power Adapter (12-pin Type A) - Compatible w Tacoma (15-23), Select Highlander, Tundra, Sienna; Honda Ridgeline & More. USB Power, Connects to Rearview Mirror. Easy Install!

First of all, it works well. I have a 2022 Tacoma Off Road, and the model that I purchased (12 pin, Type A) was compatible with my year and make. Installation took 20 seconds, and that's not an exaggeration. The adapter is basically just a bridge/extension cable between the vehicle and the mirror, with a USB-C connection point spliced in between. Before this, I had a fuse tapped under the driver's side panel, and I never liked it because the "add a fuse" kit stuck out further than the OEM fuses, which made it impossible to put the cover for the fuse box back on. That bothered me. This thing fixed that problem. Best part is that you dont have to run wires/cables through your trim. If you've ever done that on a hot summer day, you know how miserable it can be. The USB-C extension port has a sticky side that I stuck to the back of my mirror so it isn't visible. All and all, I'd say this adapter is well worth the money, is built very well, and will save you the headache and time of running wires. I'm so happy with this, that I'm considering buying the adapter that supplies power while the vehicle is off.

VERY easy installation on my Tacoma and is low-profile. I easily mounted a dash cam on it. Great product.

This Dongar Dash Cam Power Adapter was exactly what I needed to install my dashcam in my 2019 Toyota Tundra without the hassle of hardwiring or using fuse taps. It plugs directly into the back of the rearview mirror, making the whole setup super clean and professional-looking—no dangling wires or exposed connections. The install took under 5 minutes. It’s literally plug-and-play. The adapter fit perfectly into the Tundra’s 12-pin mirror harness, and the USB connection powered my dashcam immediately. It also turns on and off with the ignition just like it's supposed to, which gives me peace of mind that it's working correctly without draining the battery. This is hands-down the easiest and most OEM-looking way to power a dashcam. If you have a Toyota with a compatible mirror, don’t even think twice—get this adapter!

I almost ordered one of these for my previous truck but the reviews warning of blown fuses and CE codes after install made me hesitate. I really wanted to install a dashcam in my new truck so I finally ordered one to give it a shot. My truck is a 2021 Tacoma TRD Sport DCSB with premium and tech. My dashcam is an older (2018) Aukey DR02 that takes a mini USB cable for power. I read that others were successfully using the mini Garmin cams, but figured my dashcam is pretty small and basic (no WiFi, no GPS, no rearview cam) so the power requirements would likely be similar. Install takes all of 5 minutes and everything you need is in the box. I wish Dongar disclosed in the listing that they include a 6 inch mini USB & a 6 inch micro USB cable because I ordered short cables separately. Either way, a nice add-on to include in the box. Install goes like this: 1. Clean your windshield. 2. Align and place the adhesive pad (or suction cup) for your dashcam behind the mirror. 3. Unplug the 12-pin connector from the back of your mirror. 4. Plug the Dongar adapter into your mirror where you just removed the OEM cable. 5. Plug the OEM cable back into the 12-pin port on the Dongar adapter. 6. Plug the USB cable into the Dongar adapter and into your dashcam. 7. THEN start or power up accessory mode in your truck. I've checked the adapter's temperature after use (again, due to warnings in reviews here) and it's nice and cool as it should be. My guess is folks who had issues with it running hot or blowing fuses are using devices that draw a lot of power thus overloading the adapter. Everything so far works as described and it's a nice clean install with no wires hanging and no ports below permanently in use by the dashcam. As an alternative to a traditional hard-wire install, which some might not be comfortable or capable of doing, this little adapter is the way to go and a nice mod for under $35.

This thing is a must for any dash cam, get rid of the wires nice and clean. install looks great and works great

Item works as stated and was very easy to install. There are two reasons it did not get five stars. The first reason is that the adhesive included on adaptor is very weak and did not last a whole day when stuck to my rearview mirror. The second issue is that while they include three cables with the adaptor the cable are six inches long and do not work well in the adaptor and unit are not almost touching in my case. That being said it is nice not to have to worry about plugging into the 12 volt connection and having to keep up with that cable.

This works well. I use it to power an older dash cam. Pretty easy to install. Most important thing is you get out of running cables through your headboard.

As long as you Camry has the electrical auto dimming mirror with a direction indicator this will work, it was an optional feature so it will not work on all models by it works fine on my 2012 and 2016 since they both have this type of mirror installed. It is not designed to work with models where the plug is inside a casing (FitDVR is one model that work with those type of mirrors) instead of on the back where to place the box is not as obvious on a Camry. Also only get the if you do not want parking monitoring. This type of mirror is only supplied power when the car is running. If you live and work in a safe area this will work fine for you. I am using mine on a Viofo with the Starvis 2 sensor. It is significant upgrade from the older Sony sensor but that is for a different review, I just felt the need for context of application. Yes, the Camry uses 3 of the 12 pins, this adapter only connect 8 of the 12 but they include the 3 used on their auto dimming mirrors. Unplugging and plugging is easy. The type C connector fits tightly so I doubt it is ever falling out. I was not able to test the other three cable. All are fairly short to avoid a cable bundle behind the mirror.

2018 Tundra Crewmax... works perfect!! less than 5min to install..

Amazing product. A bit pricy but no messy wiring required. Plug and play set up. Works on my Mitsubishi Phev 2022 12 pin connection.

Grabbed this for my truck and install was really easy. Disconnect the stock power supply and connect with the dongar connector. Nice and low profile. Saves the hassles of running a wire to my fuse box for my dash cam. I have no issues with it overheating and no issues with the dash cam functioning. Dash cam shuts off when the vehicle is shut off and I have not experienced any battery drain. Works as it should with no errors. My auto dimming mirror still fully functional. Bit on the expensive side but to me it was worth it to not have a run of cables and routing it.

Outstanding, clean, quick, easy. BUY IT!

Easy enough to install, instructions were ok. The cables could be a little longer as hidden mounting options are hard to find with the current design. But Dash cam works effectively with this set up.