Eleduino Banana Pi Pro Clear Case Enclosure Box Blue With Heatsink Kit

Assembly is a bit tricky because the ever-popular tab-in-slot construction has to all line up at the same time and wants to fall apart until the last panel is added. But that's just the nature of tab-in-slot. Once finished, it's practically bulletproof.Some specific areas that might be improved:1. It has nylon screws and standoffs. Nylon is good to avoid accidental short circuits, but nylon threads are easier to strip than steel and their greater friction makes it more difficult for me to feel when they've "landed". This is actually my second choice for a case - my first choice had nylon snap-together brackets instead of screws, but I can't find it anymore. Not a big deal; I just like that style better.2. It doesn't have a dedicated opening for the backup battery's wires, so I'll have use one that's meant for something else, like the camera connector. In fact, I've never seen a case that accommodates the battery, probably because the connection for it is two pads on the board that you have to solder yourself, one of which is not thermally relieved from the ground plane and therefore difficult to do well, and so the single-cell external Li-Ion backup battery is likely not a well-known feature of this board. (a.k.a. built-in UPS)3. There were two cutouts that did not fully release during manufacture. One fell out on its own as I removed the protective film; the other, from the camera connector, was still attached at one end, but only barely. A fingernail broke it loose, so not a big deal there either.The title and pictures say that it comes with a heatsink for the A20 CPU, but it actually didn't. -1 star for that. However, it does have the correct cutout to support one. Probably won't need it though; just one of those just-in-case features that's nice to have.

The case looked good but it did not fit snuggly. Some panels were a little loose and it made it a little difficult to insert the SD card (for instance).

pain in the butt to assemble and peel off stickers on the plastic. It wobbles a lot but gets the job done.

Case is a bit loose (will rattle inside the case) but I would rather that then having to risk breaking the board by having to cram it into a tight case. Also note that the micro USB ports become more recessed and can only be reached with a slimmer cable (most phones come with ones like that so it's not a huge issue).

one of this item plates was arrived with broken corner.but nice box anyway

Case is okay and fits well. But assembly is a little tricky and involved.

Nice.

does not fit the new banana pi