WARN 102355 Jeep JL OE Rubicon Front Bumper Grille Guard Tube, Low-Height

This is easy to install and good quality. The part matches my 2019 JLUR steel bumper perfectly. I opted for the low height as the bar leans forward and I didn’t want it to stand out too much. I doubt this bar is legal in Australia as bars should be leaning towards the rear of the car allowing struck pedestrians to roll over the bonnet in theory. (I am not planning on hitting anything especially pedestrians). The screws require a Torx T45 and I used a thin rag to cover the screws so I didn’t scratch them as they are re-used. The screws are locktited in so a firm hand is required to undo them. I used anti seize to re-insert. Fitted in 15 minutes and good to go.

Love the bull bar. It add just the right touch. Matches the stock bumper with color and texture. Super easy install. Remove factory bolts line up the holes and put the bolts right back in. Use the wrench that comes with the jeep to remove the bolts. It’s that easy. The price was right on target with any 4x4 company so don’t waist your time shopping around. Super fast shipping also so that’s a plus. Happy Jeepin peeps and yes 37s will most definitely fit 😜

Super easy to install and great fit. Like other reviewers I do note that the bar is very close to the tow hooks. I use soft shackles so it should not be an issue but be aware.

Looks great, Is holding up well.. would buy again

This product comes very close to the tow hooks. VERY CLOSE. I was wondering if this bar would make my hooks useless. I tried asking this question prior to buying, but I was getting conflicting answers. Some people said that the hooks were no longer usable, and some people said the opposite. So, I decided to take a chance and just see for myself. Long story short: I am able to get the factory trail-rated kit straps onto the hooks, but just barely. And I mean BARELY. It's so tight that I have to pull and wiggle the strap down for about 20-30 seconds, then I'm finally able to get the strap onto the bumper hooks. Since I likely won't need to use this very often, it should be fine for me. Definitely would be a pain if the hooks are used often. There is a little big of give with the bar prior to tightening the bolts down onto the bumper. Do not tighten the bolts all the way down at first. Just get the bolts started, and make sure you push the bar all the way back, and as centered as possible between the two hooks. Then tighten. Took me two tries but I eventually got it (first try wasn't centered perfectly, and I could only get the strap onto one of the two hooks) Anyways, other than being way too close to the bumper hooks, everything else seems good. Seems very sturdy. I deducted one star for being too close to the hooks.. seems like a little bit better planning could have avoided this issue altogether.

Not much to say about this bar except for it was super simple to install on my 2018 JLUR factory steel front bumper. Only six bolts need to be removed/reinstalled. Looks great after installation although for what it is, it seems a little pricey. But that's about par for the course for Jeep accessories. As others have mentioned, it does partially block the factory tow hooks but not completely (see pic). I think they will still be usable. Very happy with this purchase.

This fits perfectly and was easy to install. As other reviews said if you have a nylon rope and want to put it over the top of the hooks with the bar installed it will be super snug so I use open sided hooks instead which is not a big deal with my winch.

I was excited for this purchase. I realized I ordered the wrong size and I thought I'd return and purchase the larger one. I kept it on and shortly about two weeks in I noticed the rusted areas and immediately requested a refund. Unfortunately, it was traveling and our 30 day expired. I want to warn you, it only took two weeks before this started to rust out, will not buy this brand ever again. I understand things rust out, due to sun ect but two weeks in shows poor quality and poor paint.

This bolt on bar went on flawless and looks awesome!!!…definitely recommend as long as you have this same bumper….it fit perfectly it fits the 2024 Rubicon X as long as you get the upgraded steel bumper ..

Super easy to fit and compliments the front bumper really well

This Grill Guard tube from Warn looks like it was manufactured by Mopar to fit the stock JL Steel Bumper. It fits perfectly, has a great finish and was very well packaged. I couldn't be happier.

I read the reviews prior to purchasing. My bar arrived on time, packaged very well, wrapped in a felt bag as not to get scratched inside the box. Mounts in minutes with a t45 torx using the factory bolts.

Could not believe how well this was built very nice and fit perfect you have my business for sure