Mounting Dream Tilting TV Mounts for Most 26-60 Inch LED, LCD TVs up to VESA 400 x 400mm and 88 LBS Loading Capacity, TV Wall Mount with Unique Strap Design for Easily Lock and Release MD2268-MK

Great wall mount for the price. We had an old 20" tube style TV that would not die, and it had been sitting on my wife's dresser in our bedroom. I know, we are behind the times a bit. :) So, we purchased a new 43" LED TV during Black Friday. The wife now wanted the TV off of her dresser so she could reclaim some of her dresser space back. I did my research on what TV wall mounts to get. The consensus out there said Cheetah mounts were the best. I came across this one and noticed that it was about $10 cheaper than the lowest Cheetah Tilt wall mount. Reviews for this one was good. Being the cheapskate that I am, I went with this one. :) The mount came in a box. It consists of 3 main pieces (the wall mount bracket and 2 arms). It came with plenty of screws for the bracket and for your TV. The arms were already assembled. I laid the 3 main components on our bed to see how it all worked out. The top "hook" on each of the arm brackets hook onto the top part of the wall mount bracket which has like a lip for the hooks to hook on to. The bottom of each arm brackets also have a retractable hook. By pulling on the strap, you can move the hook down so you can lock the bottom part of the brackets on to the bottom part of the mount. The wall mount went up easily after finding the studs on the wall. I put the arm brackets on the back of our new TV. From there on, my wife and I put the TV on the wall mount. The top hooks went on the top part of the wall mount. We pulled the straps on the arms, made sure the bottom of the arm bracket was resting against the bottom of the lip of the wall mount, and released the straps so the hooks can lock into the bottom of the wall mount. Voila! New TV mounted on the wall. You can even slide the TV from left to right if you need to "center" the TV to the wall. I used the included leveler and it was leveled perfectly. I didn't have any issues like some of the other reviewers said. I doubled check with my own and it came out to be perfect also. Because of the height of our TV, we use the Tilt option. Probably didn't need to tilt it but my wife said she could see a slight difference in the viewing when it was tilted. Word of advice. Before you mount the wall mount bracket, make sure you have it to the spot that you want to put it in. Once those screws go into the wall, you don't want to move them. I suggest you cut out a card board of the same size of your TV and put it to where you think you want it to be. For us, my 13 year old son and I held the TV up to the spot that we thought we wanted it to be. The TV was on and my wife then laid on the our bed letting us know if the height was acceptable. Overall, a good purchase for the price. Metal was thick. Quality was nice. Installation was easy. I have seen other wall mounts with the same feature as this one for a lot more than. I'm sure they work just as well as this one. But why pay more? I would easily recommend this mount to anyone who is thinking about buying a more expensive model.

Super easy to install and results in an extremely sturdy TV mount. My use case was as easy as it could be with 16" studs but it still would have been pretty easy to get this installed for irregular spacing...they even include instructions with several different options. The TV feels extremely safe and secure and yet it's still super easy to pull the TV down off the wall as well when necessary. The 8 degree downward tilt is perfect as well. I've mounted a TV for a home gym so a slight downward tilt is perfect to accommodate viewing from the floor. I mocked the whole thing up with the provided template and a piece of poster board so I had it exactly level from the start but the design of the mounting frame allows for a fair amount of micro adjustment once it's on the wall. The only piece of advice I could offer would be that you could probably use a slightly larger drill bit for your pilot hole. I think the advised 4 mm may have been a bit smaller than necessary. I honestly can't imagine a better mounting system could possibly exist. This was affordable, sturdy, easy to install, and provides versatile downward tilting. Can't say enough great things. Truly the mounting dream!

Alright so i waited a couple days to post a review. What i like about this product is that it does it what it says(mounts your tv :) ). It is quite sturdy and not at all complicated to put together. It comes with instructions and a small leveling tool. I would recommend you get this for the recommended tv sizes each version can hold. It does have a slight tilt forward i believe a few degrees forward. The tilt is decent enough depending on how far the tv is from the bed and how far up you place your tv. If its above your eye level then you might want another product depending on how big your tv is. If its just at eye level and below then you should be good. This took me about 1 1/2 hours because i wanted to make sure it was even and that it was going to be secure. Also it took me awhile to figure out how to operate the hand drill properly before i could get things to go smooth. The 4th picture is all the tools i used to mount my tv. Tools Needed Stud Finder Small v8-v10 Hand Drill 5/32 drill bit Tape measurer Some sort of leveling tool for evenness (if you want to go cheap and put it in the drywall with drywall studs i suggest you dont get a tv mount because that isn't as secure as putting it into the studs.) If you don’t have money like that you can use the tape measure instead of the stud finder. Just remember each outlet is attached to a stud and each stud is 16 or 24 inches apart from the middle. Also there are studs that are usually centered to the room. So be careful of pipeline or electrical lines. For concrete and brick walls refer to youtube for your instructions.

Overall, I would probably honestly get this again. The price is great, and its well made despite its shortcomings, and comes with good extras (level, HDMI cable). I would not recommend this if your audio/video out plugs are near the bottom of your TV. Getting the frame on the wall was easy, and so was attacking the braces to the TV. Everything is very straightforward, instructions are easy, and had plenty of hardware. The tough parts: 1) even using the spacers provided, the TV is "holy crap" close to the wall (to be fair, it is advertised this way). It seems nice, but the issue is that it doesn't even leave enough room for the plugs. Power, HDMI, component, they all hit the wall. This makes tilting the TV difficult if they are on the bottom end of the unit, because they will hit the wall and prevent you from being able to tilt it fully. It also makes it difficult to lock in the bottom hooks, because you need to jam the TV into the wall and feel like you will break it, and there's a good chance the cords will get in the way. 2) You cannot tilt the TV until AFTER you have the brackets 100% connected (aka the bottom half). This is tough because there is very little room to reach the screws once its on the wall. I was able to loosen them so it just kind of tilted forward and rested, but it creates an "all or nothing" situation in terms of tilt. You can either have it flush, or tilted 10 degrees, no trying to find a middle spot. Overall though, still happy with it. The price can't be beat.

First off, installation is a breeze. The instructions are so clear that your pet goldfish could probably figure it out (though I don't recommend letting them near power tools). The included leveler is great for those that don't have a toolbox at home, and it's magnetic so I was able to set it up by myself with the level falling off every two seconds. This mount is sleek and low-profile, and it has a tilt function, which is somewhat limited but still function. I have this mount holding my bedroom tv and it works perfectly, but if your TV was going to be higher than ~6 ft I'm not sure how great this would work. I give it 5 stars only even with the limited range of motion because it does exactly what it says and is perfectly functional, just make sure you know its does not have horizontal movement, on vertical. Overall, it's practical, easy to install, and can add a touch of elegance to the room.

Easy to install and secure! Enough room in the middle of the mount to put the outlet for a clean install and when flush the plugs will fit. Note that there is though room between the back of the TV and the wall for your streaming box.

The quality is super strong and effective. I bought this in 2020 and I’m still using it today. It was so easy to put up all the hardware was in the box and great instructions there also is a level that helps you keep everything straight. would definitely recommend this for anyone that wants an easy installation process.

This thing is great! For years we've had a huge 46" DLP in our living room and I have dreamed of the day when I could mount a flat panel on my wall; well that day has been realized! With the help of my new TV, my trusty cordless drill and this little wonder, I was able to secure my flat panel onto my living room wall and achieve some fraction of Nirvana. I will say that as far as the construction, the unit is in three pieces, and is pretty straight-forward to understand. I didn't consult the included instructions, but you might want to if you aren't familiar with VESA mounts or particularly mechanically inclined. I have two gripes with this, but they aren't so bad. 1. The mounting screws are HUGE! Seriously, they've like 3 inches long and probably about 3/8" in diameter. I don't keep really big drill bits or powerful drills at home, so this could be a problem if you aren't prepared for that. I was able to secure the screws, but it was small hurdle in installing this, and might deter someone who isn't prepared for it. On the plus side, the thing isn't going anywhere. I'm not at all concerned about my TV falling from the wall. 2. The latches are finicky. Setting the TV on the mounting plate/cleat is easy, but at the bottom of the two pieces mounted to the TV are some pull strings to engage/disengage some teeth to grab the bottom end of the plate/cleat. I had some trouble getting them to engage onto the cleat. It isn't terrible, but enough to frustrate someone who just spent half an hour or so drilling holes and screwing 3 inch screws into the wall and really just wants to be done with what they assumed would be a breeze. Those two things aren't enough for me to take any stars away because they are essentially my mistakes and quirks. They aren't enough for me to recommend that you (or anyone) avoid these like the plague. They're great. They do exactly what they are supposed to and do it for a reasonable price. The included HDMI cable also supports 4K, so that's a definite plus.

Sin duda es muy fácil de instalar, cuenta con todas las opciones necesarias , además que el precio es el correcto su calidad es excelente. Llego en tiempo y sin daños. Solo una sugerencia hay dos versiones de este modelo. si pueden comprar el otro, ya que trae una plantilla y el nivel está imantado.

I used this for my 40" TV, 400x200mm VESA. Its a perfect fit and has a bit of room to adjust it a bit. It's study and there's no way the TV is going to fall. The instructions are really good and makes the installation so easy. The troubleshooting manuals cover the main issues someone might have as well. Important note: if your wall studs are off-centre, there is no room for a tv with 400mm width to shift left or right. The part that attaches to the TV will already be at the edges of the wall plate. In this case, you will need a bigger wall mount.

Excelente. De las mejores opciones que no desperdician espacio ni conveniencia.

Aguanta mucho peso y movimiento saviendolo instalar!!

It does the job. The TV is secure with no fear of falling.