VANTRUE Dash Cam Rearview Mirror Mount for N2 Pro, N2S, T3, N2, X4, X3, T2, T1, X1, X1 Pro Dash Cams, Rexing V1, V1P Dash Cams, Yi 89006 Dash Cam

I've had this dash camera for about six weeks now, and it works perfectly. Excellent video and audio quality. Really easy to use. The rear view mirror mount was a little tricky to install because there's not a lot of room around my mirror stalk, and it just took a bit of patience to get the wing nuts tightened. But that said, the mount works quite well. Really pleased with this camera.

Very pleased with the quality and construction of the N2 Pro rear view mirror mount. Yes, its plastic, of course, but feels sturdy and strong. Maybe fiberglass reinforced? It's simple to attach to the mirror stalk, including the rubber strip so it doesn't damage the stalk,or squeak. Very pleased with this mounting bracket.

Fastened just fine to mirror shaft & camera mounts up well but after bumps, the camera comes swinging off the slide-on mount for it. Camera mount doesn’t has a tighten down apparatus for the camera to stay on it’s mount. Tried facing the camera down so it would bouncy forward instead of backwards but view wasn’t so good. Just know to press the camera back into proper place every once & a while and all will be well. I am happy with it but am startled when the camera just falls off & swings just under the mirror. Easy enough to slide it back onto it little holder unless it after dark- black plastic. It is low maintenance but worth the money since I didn’t want the suction cup one.

The Vantrue mount was cleverly made to neatly place just behind the mirror. I had almost an uninhibited front view. The mount was strong and sturdy to securely hold the dash cam. It would have been more versatile if an additional micro-usb could be added to the mount.

The camera mount, although cheap, isn't worth its price. The mount seems to continuously need to be tightened, as the whole assembly is plastic and flexible. What is worse, however, is the Vantrue camera I have continuously falls off the mount because it is just a flat, smooth, slide-on "bracket" which does not secure the camera at all. I have it fall off of the mount all the time while driving, or sometimes just arriving back at the car. I've tried all setups and different angles that I can think of, but none solve the issue. It's simply not a good design, or this particular one has a manufacturing error. So if you have a camera for accident/vandalism footage (I imagine this is one of the primary uses) - this mount will more than likely let you down as if you have an impact of the slightest, the camera will just fall off and will become useless.

This mount does the job; but not that well. First, you should probably have at least 2" to 3" of shaft on your rearview mirror if you expect to use this. I tried, but could not make it work with my 2019 RAM 1500. This mount does work with my 2018 Chevy Malibu though. The mount is made of plastic, but it is still pretty sturdy nonetheless. The reason that I say it doesn't do the job well is because of the adapters that plug into the camera. The Vantrue suction cup mount and the Vantrue stick on mount have adapters that slide and lock into the camera; those work well. This mount has adapters that slide into the camera; but they don't lock. I have already knocked the camera off the mount a couple times because it just slides on and off. I have been pretty impressed with the quality of Vantrue products until I bought this. While it does serve its intended purpose; it is just too easy to knock the camera off the mount. I think Vantrue needs to go back to the drawing board on this and manufacture camera adapters that lock the camera in more securely. I will probably wind up modifying this somehow to make the camera a little more secure; but I shouldn't have to. I like how it mounts and positions my Vantrue T2, but I hate that the adapter just doesn't snap into the camera securely.

Have for 7 years now on my wife rear view mirror and has only failed me once while cleaning the windshield and was bumped and while driving it fell down. other than that stay put and does not move. have the suction put in my work truck as that dose not have a rear view mirror and the suction cup falls down on hot days. just make sure to check the alignment of the cameras, the recording and audio is on as well as date & time, and remember to set the DST spring and fall. This company backs their product and support their customers 100% just message them on fb Messenger and see how fast they respond they provide awesome support highly recommend.

This product was great, at first. Since then, it's fallen off the mirror, twice. Turns out the included clips don't actually secure the camera like the suction cup once does - it can just slide right off. I also have to tighten it every so often, as I'll get in my car on hot days and the camera will be facing down. I was also a little annoyed to see that this does not support charging via the mount like the original suction mount does - and I've no idea why it doesn't when it's from the same company for the same product. I can get past that, but the other 2 flaws are annoying. There's no alternatives out there for this, so I'll DIY this one until it functions as it's supposed to. It's a shame because I was really pleased at first.