NEIKO Low Profile Offset Screwdriver Set, 5 Pc Phillips, Pozidriv & Slotted

Pros: True to their name Low Profile, Bits appear to be snug as I gave them each a little test, Had a 3.5" hard drive that would not come out of old computer unit and could not access the two of the four courner screws on one side. The #2 made quick work out of the two corners. Unfortunately there was a fifth screw in the middle on that could not be reached, but I will not hold it against thes fine tools. With this I received Keyring holder for the five offset screw drivers, (PH1, PH2, 6MM flat, PZ1, PZ2) well worth the under $10 price, and I would definitely buy again if needed, but I don't see that happening unless I loose one. I like the solid steel enamel coated handles if you want you could put on magnetic tool bar as a magnet sticks well to handle. Tips are steel also and have a nice fit at least for the #2 PH machine screw that I needed access to. Very stable and did not fall out of my hand at all while being used. Helps if you can apply pressure at the bit, if you turn slowly you can feel the bit pop into the head of the screw you are working on. Looks as good as the promo photo being used Cons: Well strange as it may seem I would think that an additional on for 3mm flat may be useful too. Non ratcheting, but that is what makes them low profile also ratchets don't hold bits well in tight spaces. You have to be patient as with tight spaces you are working a quarter turn at a time in most cases. Perfect addition to my tool kit. Yes I'd buy this set again and recommend to others. BDV

Where have these been, my whole life? The perfect screwdriver for tight spaces.

So much better quality than I expected for the price! Worked great for the screw I needed to tighten. Now I'm glad to have them in my toolbox for the next screw I cannot get to. If you're thinking about these, just get them! You know you're going to need these eventually.

Have the occasional situation where I need to get access to a screw in hard to reach spots. This is a decent set, not top of the line but will do the trick for the rare occasion I need this type of screwdriver.

Nice for getting into tight spots. Very durable and high quality. Worth the price.

I liked the low profile for installing door locks. It was great for removing the old locks even when the screws were stripped. Couldn’t have done it without this tool.

This specialty screwdriver set saved me a lot of money I would have spent calling the certified maintenance crew for my big‑brand oven and fridge. I’ve used it to tighten loose screws in numerous spots across my appliances, and it handled every awkward, nonstandard fastener I encountered. Sturdy, well‑made, and truly practical — strongly recommended.

Great situational tool with super low profile fits in gaps less than an inch. However, did not work for my situation. I originally purchased these for mounting a TV and securing the brackets onto the back of the TV. The positioning chosen for the 2 brackets that go onto the back of the TV in the VESA holes just so happened to be in a location where the holes were blocked by other parts of the bracket. So a regular straight screw driver even at an angle was not able to grab onto the screw head. There is less than an inch opening to get this offset screwdriver in so these being super low profile are great as they fit right in. However, here is the issue and why they didn't work. The bits are way too short and the screw head was just too deep for the bit to make contact. if the bit was maybe 1/4", maybe even 1/8" longer than it would've been able to bite into the screw head. Again, great to have available in your set of tools if you ever need it. However, I don't know when I'll ever need something like that again. But at a couple bucks and already throwing away the packaging, I'll be holding onto them for the future.

شريتها عشان برغي صعب اوصله بالبي سي وسوا الي عليه 10/10

el producto se siente sólido es cuerpo del destornillador es una barra con un buen grosor 2.65mm aprox no se doblará fácilmente, en el área de la punta el alto es de 1cm aprox, las puntas del destornillador se sujetan a la barra solo por presión no se perciben alguna soldadura o algúna otra forma de sujeción, el destornillador tiene una inclinación de 5° lo cual no siempre será lo ideal en algunos espacios, es buena esa inclinación para ejercer más fuerza al tornillo, pero será necesario tener otro juego de destornilladores con un ángulo de 0° para lugares de difícil acceso.

Gut

This tool did the job in a tight awkward corner. Great addition to my toolbox

Senza questi cacciaviti particolari non sarei riuscito a riparare la vite allentata