Antenna or LED Fog Light Mounting Bracket from Rhino-Rack, Folding, Fits Pioneer Platform, Vortex & Heavy Duty Bars, for CB Radio Antenna, LED Fog Lights, Truck LED Lights, & More (43196)

Durable bracket, really easy to mount and use. Works well with the antenna for my WeBoost Drive Reach OTR.

Well built, exactly what is described. Seems a bit pricey.

This folding mount is just what I needed for my cell booster antenna. It has several bolt holes for mounting to just about roof rack channel and the coated steel can also be welded to a steel rack as I did.

Really nice mount, heavy too.This is exactly what I needed to mount one of the antennas up high with the ability to fold down when not needed or when pulling into garage.

If I pay three figures for an antenna mount, it better be in new condition, not a used item I suspect I received.The box was ripped open on two- sides, and one side was crudely taped back together. The manufacturer's embossed logo tape was mangled and missing letters where it appears someone attempted to make it look factory sealed by possibly re-attaching pieces using regular tape (See photo).- The main mounting surface of the item was scratched up and discolored from the rest of the mount; it appears to have been mounted and left outside for a while. (See photo)- All of the hardware was loose in the box, not in a bag; all the pieces just fell out of the box through the ripped-up covers. I managed to pry open one end of the box to inspect the product, one of the lockwashers is missing. (See photo).

Worked great with my Retrax tonne cover. Exactly as described

Used to mount my weBoost drive reach antenna. Zero complaints, multiple options to mount

I am a mechanical engineer. This doesn't mean I know much about radio, or anything really...., but when I look at this, I am incredibly disappointed and feel like my money was taken.1. The mount hole size is 17 mm which makes it a little difficult to adapt a standard 3/8 CB stud. You will have to use washers. You will also struggle to find a right angle 259 connector that does not interfere with the release mechanism unless you buy a premade, low-profile cable. I had to make multiple trips to my local radio store to find something that works. Another 10 mm of clearance and this would be a non-issue for any connector.2. The mount is made in China. I would understand the expensive price if it were produced locally in Australia or USA, but for being so expensive, this means Rhino rack is pocketing probably half the profits.3. The mount is heavy. While this is a good thing and something to appreciate, you need to be very careful if you drop the mount during install on your vehicle. You can very easily dent panels, gouge paint, shatter windows or even break the release handle. This is a very high possibility with new (low friction) satin powedercoat paint on the bracket. Which leads to my next point:4. If you accidentally drop the mount, you WILL shatter the plastic release handle because the mount is so heavy. Rhino Rack is very blunt with this and will not support or sell you a replacement handle. It was a little comical on how dismissive they were for an inquiry. Although this is probably easily replaced with another handle as it is threaded, still a big disappointment.5. This will really only fit Rhino Rack brand roof racks out of the box. Do not expect to be able to mount this to any Thule aero bars without trips to a hardware store.6. The pivot is poorly engineered. Although the the detent pin works great, the pivot itself relies on two bolts going through punched holes with nylock nuts on the end. Quite simply there is a very fine line between these nylock nuts being too tight and too loose. You have two options at that point: An antenna mount with 20° of slop , or an antenna mount that is impossible to swivel into position. I really really wish they would have used some nylon bushings or a shoulder bolt of some sort. With such slop, it really negates the use of such thick stamped steel. You may have just used extruded and poorly machined cheap aluminum at that point.TLDR: Poor design, expensive price, no parts support. Find another option.