Generation Lighting 7543502-962 Seagull 7543502-962 Two Light Ceiling Flush Mount,White, 2-Light, cETL Listed, Safety Rated for Wet Locations, Aluminum Construction

Replaced the light in the master bedroom closet with the 3 bulb fixture and replaced 2 in the master bath with the 2 bulb fixture.My husband installed it and had no problems. They are bright and look better than the original fixtures.

I installed two of these today - one in my kitchen and one in my hallway - to replace some very old fixtures that were here when I moved in last month. These made a world of difference.They're very simple and exactly what I wanted. Installation was very easy once I dug up screws to install the metal plates. 🤬 Why would screws not be included? Neither of the old fixtures had plates, or screws to screw them on. It's outrageous how companies pinch pennies at the expense of customer satisfaction. The problem is laid at the feet of the consumer now. How much money was saved by not including two tiny plate screws? 2 cents? Bizarre how companies survive these days doing business this way. So, just a heads up...go to a hardware store and buy two screws for installing a light fixture metal plate. You will be happy you did.Anyway, after the metal plates were installed and wires connected all that's left is attaching the fixture, screwing in light bulbs and attaching the glass shade.Take note of the ONE clip that has a spring on it. You can see the spring underneath the insulation. What I did for future bulb changes and possibly future owners, I marked bright pink sharpie marks on each side of the one spring clip (on the white metal base) and marked the top of the clip too, so I will know it's the spring-loaded one by just looking. It's the clip you have to pull to release the glass shade to change a bulb. You can't see any of the markings from the floor. 👍 Plan ahead. 😉These take (2) 60 watt or led equivalent bulbs. I installed (2) led daylight bulbs and they're too bright. I think I'm going to change them to 40 watt equivalent. The fixtures look nice. Nothing fancy, but they're simple and attractive.Two thumbs up for the fixtures and 5 stars. Zero stars for not including the needed metal plate screws.

I bought the LED ceiling light (you know the ones) in 2021 thinking it would save money and would last a long time. Not even 3 years, the LEDs start to flicker. If this was a light bulb type of ceiling light, all you need is to replace the light bulbs. But no, the LEDs are soldered onto the board and cannot be replaced.So you need to replace the whole ceiling light.Got this new one, installation is as straight forward as you can expect. Took about 20 minutes to remove the old fixture and replace with the new one. Popped in three LED lightbulbs and I will report back if anything goes wrong.If you don't see an update, it means we are still happy with it.

As mentioned elsewhere, these are mid-quality cheap items. But they're nice enough to fit in my nice hallway, if you know how to get them installed.1) Clips: Some people say they had trouble installing the glass because the clips don't move. One of the three support clips is on a spring mount and can be pulled away from the center. The other two are fixed.2) Gap to ceiling: The white core is visible from the side. The glass dome edge is about 1.25 inches from the ceiling. If there's a gap from the white core to the ceiling, then you installed it wrong. The central mounting post is adjustable to create tension against the mounting bracket. There is no flaw in the fixture that prevents proper installation.3) Quality: The clips aren't always mounted straight, and their finish appears to be metallic paint over what I'd guess is die-cast pot metal. But the frosted glass seems real enough. The core is sheet metal with white paint. The two light sockets seem safe but are mounted on very thin sheet metal.

This light is awesome. I originally bought almost the same exact light at home depot. Only difference was the Home depot light was 18" in diameter and this one is 12". Both had frosted glass shade but this one was 20 dollars cheaper. The main reason to buy this is if a bulb burns out you can just replace it. In addition you can pick the color temperature just by changing out the light bulbs. Nowadays all the garbage they're peddling at the big box stores have these panels with rows of LED inside instead of a place to screw in a light bulb. The problem is when these LEDs go bad you have to throw the entire fixture into the trash can. And you never know when that's going to happen. They say it's going to last 10 years but if you read the 1 star reviews on these things you know that's not always true. They just might blink out right after your 90 day return period has passed. The only issue with these is they are held up by a single nut right in the center. If you tighten the heck out of it you can get it to come up flush with the ceiling. Some people also just drill a few holes right through the sheet metal and put some long drywall screws through to hold it up. Whatever works. One of the three decorative brackets that hold the glass in place has a spring in it that will stretch out and let you remove the shade easily. Good value for your money but the peace of mind that you won't have to replace the entire fixture some time down the road is priceless.

Easy to install and looks good BUT it’s way over priced. Inflation strikes again !

This is an easy install. I replaced a 30yo light that came with the construction - and took me about 15 minutes to complete it . It’s simple, good build and beautiful. The price is affordable. The size is perfect for replacement and it functions well. I used 2 LED lights 3000k 1100 lumens and they added good lighting to the vanity and bathroom. But I can see why others are irked that there are no included screws for the bracket. I used the old screws that held the old light’s plate in the casing inside. Other than that, I highly recommend this ceiling light!

Love the clean look of this light. It’s bright without being blinding in my hallway. It was easy to install and the spring makes taking the glass shade down easy when you need to replace a bulb