Art Pro Audio P16 - XLRバランスパッチベイ

Works flawlessly

Great bit kit

I bought this patch bay so that I could have easy access to both my outboard preamps and the preamps in my Apollo interface, all of which have inputs on the back (which is normal, but hard to get to in my small studio.) I purchased a short xlr snake to run between the preamps and the patchbay, and now everything is nicely organized. I really only needed 8 inputs, but then I realized that I can use the other channels to connect to my mixing board for rehearsal, etc. You may be asking yourself if you really should just use a TRS bay instead, but if you use preamps / mics with phantom power a lot, I'd use this bay in conjunction with a TRS bay. While a TRS bay will pass phantom power, you have to make sure you never patch/unpatch a mic from a preamp with the PP engaged! You can damage the preamp this way ("hot patching.") I use the ART XLR bay to send mic signal to preamp, since there is no risk of hotpatching with an XLR input. Then I connect the output of my preamp to a Normalled channel of my TRS bay (Sampson S-patch) that feeds back to my line inputs on my interface unless interrupted with a patch cable if I need to send the signal to a processor. It's a bit more complicated but will save your preamps from hot patching when your brain is in a thousand places during a session and you can still use XLR M-F cables. I detect no noise or signal loss from this unit, and the jacks are nice and tight. The construction of the unit feels solid enough to take some abuse if you were to use it in a live sound application, and it's a definite plus that you can flip the rack ears around, which allows you to select male or female jacks on the face. Overall a great patchbay, especially for a home studio or live rig.

Great quality product - as advertised.

Silenziosa e senza colorazioni al suono ... un ottimo prodotto per il prezzo alla quale viene venduta. Utilissima l’opzione reverse delle alette di montaggio rack .. avevo giusto appunto necessita di avere i jack OUT avanti e non dietro come quasi tutte quelle in commercio, sono bastati 5 minuti e un cacciavite a croce, tutto risolto !!!