Computer Desk with File Drawers Cabinet, 47 Inch Home Office Desks with Filing Cabinet for Small Space, Gaming Study Writing Table PC Desks, Gray

It is exactly as I was expecting based on the product description, pictures, and reviews. Plenty of side-to-side leg room, and I can cross my legs under the desk without hitting the bottom side of the desk, even with my chair at its highest setting. I MAY have enough room to be able to put a keyboard tray there. I haven't decided it I want one yet. The desk came packaged well. All of the pieces came individually wrapped and protected. MOST were numbered to correspond with the pieces in the instructions. Clarifications & Tips: 1. The drawers are not just fabric. They are cardboard covered with fabric. The front portion is more of a pleather with a wood-grain look and texture and can be wiped down with a damp rag. They are fairly sturdy, but I wouldn't put heavy items in them. The handles are metal and are a bit of a pain to install since they have tiny screws. One of the handles had two places where the paint had been chipped off. I may see if I can get the manufacturer to replace the handle, but I turned the chipped portion facing down so it is not noticeable. 2. It would be helpful to have a flathead screwdriver or two as you assemble. We used them for screwing together the small plastic screw sets that hold the metal file rods onto the drawer. We also needed the flat head screwdriver as we were installing the braces that hold the drawers. These are the same bars on which the drawers slide in and out. The braces slot into the legs, but the piece that is supposed to slot in and slide down into place was too tight for about half the slots. We slid the flathead into the gap and pried it out just a tad to widen the space and it worked great. See pics. 3. There are 3 sets of main legs for the desk. Each is different for a reason. Make sure you get it right. There two that go on either side of the drawers and one for the opposite end. All three leg sets are different, that is why they are numbered individually in the instructions. We accidentally switched the two legs on either side of the drawer unit and had to unscrew them and correct the mistake. It's really hard to tell in the instructions which leg goes where, and those happened to be the only parts that weren't numbered. The difference between the legs are a) the legs for the drawers have those slots for the bars that hold the drawers up (the slots face inwards as noted in the instructions), and b) of the two drawer legs sets, the one that goes on the outside of the desk rather than next to your legs does NOT have an extra set of holes on the outside of the bars. Those holes are for the brace that you will install horizontally on the back side of the desk near where your feet will go. see pics. 4. The side pocket holder can be installed on the same side as the drawers, even though it is not shown in that configuration in the pictures. The side pocket does not have the same wood-grain look to it as the drawer fronts. It's a bit ugly. I haven't decided if I am going to use it at all yet, and if I do, I may install it on the same side as the drawers so it is less visible. 5. One thing I didn't expect from the original pics: the desktop is two separate pieces. My two pieces are slightly warped. I don't think it will be enough to bother me, but I can see how I will need to keep extra paper or padding underneath anything I may be writing on as it will bump the pen. 6. Lastly, save yourself some time and hand-tighten as many of the screws as you can. I found it much faster than using the hex tool. The included hex tool has a Philips head on the long end and the hex on the short end, which was frustrating because the long end would have been much faster for many of the screws. We did use the longer Philips head end on several of the hex screws as we were doing the initial tightening simply because it was easier. We used the short hex end for the final tightening. When hand-tightening or using the hex tool, if you get resistance, stop, back out the screw, and try again. You may have the screw in crooked and you risk cross threading or damaging the screws. All in all this is a great budget desk.

I love it. I got it when I moved out and still have it moved back home with my parents. It has great storage, looks great, and is insanely easy to assemble. Also, if you're moving it is easy to disassemble it to make it easier to stick into a car or some vehicle if you ever needed to do so. Couldn't rave about it enough, will buy it again if this one ever gives up in me. Seems very stable to be though.

Great Desk!!!!!! My daughter LOVES this so much and said it is the PERFECT fit for her room. She said is the BEST desk for a small space. It is very cute once you decorate it and just as it is!! It great for its cost! It is a stable and nice desk, the drawers are sturdy and big! I recommend this desk for any age range (7-22). I really hope this was helpful!

This desk is cheap and easy to assemble. The "drawer pack" may be assembled on either the left of right side. However, the drawer construction is the biggest downfall of this design. Each drawer is effectively a 5-sided cloth box with a handle on one side. They each operate the same way ... sliding on runners on both sides. Regrettably, the bottoms are also cloth so as soon as you burden them with an weight (like just a stapler) the bottom sags and prevent the drawer from being slid out the front across the cross bar. While I have done it yet, I imagine this will be a real problem if you fill the bottom "file" drawer. Just be aware that this wont behave like a sold drawer construction. You get what you pay for. The rest of the desk is fantastic and I especially like the hanging pouch on the side for incoming stuff to be tended to.

This is one of the most stressful yet very exciting things I've ever built! It's very stable surprisingly on the floor and aligning was simple. It can store a lot of things just if you stay reasonable of course. I would say it was worth my money and the instructions were helpful, very helpful in building it. Despite me having some parts left (which I assume I missed something) it is still very stable, the stability is beyond expectations.

I love love love this desk! Very easy to put together especially on your own if you do not have help. I bought it because I’m working from home a lot more and it fits perfect in my bedroom. Fits my monitor and laptop perfectly with enough room to do writing if needed. Also very sturdy and feels like it will last! Only issue for me was the bottom drawer and putting it together but I didn’t need it to have dividers so I was fine with it

Super easy to put together. It’s what I expected. I’m disappointed though because at the very end of putting it together when I was screwing on the handles two out of the three handles are damaged and broken therefore I cannot screw the handle on the drawer. I’ll have to superglue it or something. I tried messaging the seller but it kept sending me to return the whole item but I don’t want to.

Great desk for the price.

Great deak for the kids

Instructions very easy to follow. Cute sturdy desk. Recommend!

Wir haben den Schreibtisch für ein Kinderzimmer gekauft und sind sehr zufrieden. Mit 120 cm Breite bietet er ausreichend Platz für Schulsachen, Laptop und alles, was man sonst noch auf dem Schreibtisch benötigt, ohne dabei zu wuchtig im Raum zu wirken. Der Aufbau war unkompliziert und mit der Anleitung gut machbar. Besonders praktisch sind die drei Schubladen. Dadurch verschwinden Stifte, Hefte und Kleinkram schnell vom Tisch und die Arbeitsfläche bleibt ordentlich. Optisch gefällt uns die schlichte weiße Ausführung ebenfalls sehr gut. Der Tisch steht stabil und macht für den Preis einen guten Eindruck. Für ein Kinder- oder Jugendzimmer aus unserer Sicht eine klare Empfehlung.

Compact bureau, makkelijk in elkaar te zetten.

Produit conforme à mes attentes. Bonne qualité, efficace et facile à utiliser. Je recommande.