Comgrow ビルドプレート 両面 PEO+PEIシート 滑らかなPEO テクスチャードPEI 磁気加熱ベッド 235x235mm Creality K1/Ender 3 V3 KE/Ender 3 V3 SE/Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 V2 Neo/Ender 3 Neo/CR-10 SE用 3Dプリンタ アクセサリー

純正のシートがダメになりこちらを試しに購入。 結果もっと早く買えば良かったと思いました。 定着よし、冷めた後は剥がすのも簡単で買って良かったです。 毎日使用しますが不満ありません。

とても良いです♪ ABSの印刷にて、浮きに悩んでいましたが、こちらにしてから一切浮かなくなりました。 この金額でこの機能性であればもう一枚持っておきたいくらいです。

Bambu Lab P2SでPLAで使用しています．強力に付きますが，プレートを湾曲させて簡単にはがせます．しかし，薄いパージだと剥がすのが大変です．プレートにキズをつけないように気を使います．プレート表面性状は，純正テクスチャPEIと純正スムースPEIの中間の粗さです．概ね満足ですが，両面ともに写真のような凸凹部がありました．この部分で印刷しないよう気を使います

定着悪くなったので交換です。 定着よく剥がれないです。

これを使うまでは初期レイヤーの接着に神経を使いましたが、PEIに変えてからはその心配がなくなりました。印刷中はしっかり接着しているのに、冷めると自ら剥がれてくれつところがとても良いです。

一部フィラメントによってはプライム一層目が癒着してしまう。 他は概ね良好！

文句なし 正規品と変わらぬ性能 見た目もいい

FlashForge Adventurer5MProで使用しています。 問題なく使えています。 性能的には特に純正との差異を感じません。 取っ手部分がむき出しなので取り出すとき純正より熱いかな。。。

This sheet is of amazing quality, and honestly nicer than my Neptune 3 stock plate. I love the double sides, the value is otherworldly. Bed adhesion is perfect and prints are coming out better than ever. Cleans off no issue, and fits every 235x235 bed including the Neptune pro series and ender 3 series. Super easy to install on my modified Ender 3 v2 Neo with high quality adhesive and the notches make lining up the plate a breeze. I love it!

Desde que la compré, las impresiones han sido mucho más fáciles de pegar y despegar. 100% recomendado.

Super

Item arrived late but was very well packaged, plate seems very good quality and has both a smooth pei and a textured pei side, best of both worlds, I will be doing extensive testing over the next few days and will update accordingly, for now giving 5 stars for packaging and quality appearance and feeling.

Okay, real quick let me say, I order a ton of things on amazon and honestly, I almost never review things... That being said, I've used this build plate for all but 30 minutes so far, and I just had to hop on and write a review. I've been 3d printing for 7+ years at this point. I'm no expert by any means, but I have a fairly good understanding of what works and what doesn't. I can say with confidence that your first layer is the absolute most important part of every FDM print, and not being able to achieve that can be one of the most frustrating. On my latest printers, I've been using the factory plastic flexible PEI sheets. And while they have served me well, there are some downfalls. One being that in order to get a good stick, I have had to reduce the first layer speed by quite a bit. Another is that if you DO manage to get a good stick, it's because you had to print very slowly, or because you had to jam in that first layer, which can later make your print very hard to remove. I quickly ripped my first one, already replaced it once, and the second one has a small tear and visible signs of wear, despite being very careful and gentle with it. And lastly, with the factory PEI sheet, I've found that the temperature you remove your finished prints makes a big difference: You can't remove it too soon or else you risk flexing your part and leaving a bend before it's fully cooled. You let the build plate cool down too much, and that thing is so stuck that you end up tearing the PEI sheet trying to get it off. I've learned that you really gotta time it for the best luck at a clean removal, somewhere around 50-60 degrees C. THIS metal PEI sheet on the other hand, seems to be a whole new wonderful story. Rather than buying the factory build sheet, I did a bit of research and decided on this one. I replaced the old factory build sheet when it arrived today, leveled it by just eye-sight, and printed a quick 25-minute test. I noticed that without any struggle, the first layer seemed to stick great, not a single issue! I then forgot about the print when it finished, accidentally let the bed cool all the way down to room temp, and I was pleasantly surprised that the pieces popped right off at just the slightest touch. Evidently once it came down in temp, they almost popped themselves off, which is a huge plus! Already feeling the confidence of this build plate, I started another print about 10 minutes ago, and I went all out and jacked my first layer speed WAY up. Much faster than I normally would... and wow, it still stuck like an absolute champ! Very great first layer, no adhesion issues at all, I'm amazed. So far, I am already thinking this is going to save me a ton of time, give consistently great results, and maintain it's durability. As long as it lasts even just 50% longer than the others, it will be well worth it's money as this thing is very reasonably priced, but I think it will be solid for much longer than that. It feels much tougher than the flimsy plastic factory magnetic build sheets. Not to mention, it's gorgeous! Makes me feel like I have a booshie 3d printer now, with it's gold build plate lol. It's very pretty, and it even has a gloss side which I'm excited to try. Hoping I have similar results with that side with the addition of having a nice gloss finish on my prints, but even if not, the matte/textured side has already blown me away. I will be sure to update this review if anything changes, but so far, I would say if you're considering it, definitely give this build plate a shot! Great way to improve your 3D Printing experience.