Woodland Scenics Realistic Water - 16 oz

Works very well with minimal work. Simple directions that yield great results. Takes a little while to dry, but well worth the wait. Update for clarification: Three things you should know that my husband did not realize when I gave it to him: 1.Do not shake the container--as you shake it, it heats and could start to harden in the bottle; 2.The viscosity of this stuff is not very high, so the best thing to do is add one thin coat at a time to avoid making a mess (Note: when we say thin, we mean less than 5mm or 1/4 in, closer to 3mm or 1/8 in)--think similar to polyurethane coating; 3.DO NOT put this stuff directly on styrofoam. It is primarily used for model railroad terrain and not historical miniature terrain. You can use it on the styrofoam hexes, but you will have to seal the styrofoam first with a really good water-based paint or a thin but uniform coating of elmer's glue. If the artificial water seeps through a blotchy coating, it will dissolve standard styrofoam hexes. I also recommend using more applications of thinner layers if you try this on sealed styrofoam, just to make sure that you don't have any runoff seeping down the edge of the hex.

Nice product easy to use

This product is expensive for the amount of surface area you get from one bottle but I’m happy with the results for my Christmas village. Make sure you read all directions prior to using and seal any foam prior to using. It’s a great product and has many uses.

It looks great, especially when mixed with just the tiniest drop of blue pain. It has a good shine to it when it dries. However, 20 bucks for the liquid equivalent of what you'd find in an energy drink can really hurt my soul. Also, remember that whatever you are pouring this into needs to be sealed well, otherwise much of it could leak out. I was using this on a clay and dirt diorama set, but there was a little place where the fluid could leak out, and it affected the rest of the set. My fault, but be aware.

PERFECT!

caution: when using on foam or porous materials i recommend cutting a small piece of clear plastic to serve as a liner thus eliminating any possibility of leaks

This is very easy to use just pour and let sit. The bad part is that I have had several bottles of this and they have not set up fully. At almost 30.00 a bottle it is expensive and you will get more for your money just using epoxies. One note when pouring into foam you have to make sure that it is completely sealed as it will flow into the pores or spaces before sealing. Also make sure you are working in warm temperatures as it will not solidify in temps below 50 degrees.

Product works great. Very easy to use follow the directions. If you are pouring a deep water area you may want to use Woodland Scenics deep water pour system. Shallow water this works great. It can be used for deep water you just have to do in layers and let set 24 hours between layers . I’ve used it for shallow and deep. It looks great you just have to be patient with the time it takes to do the layers.

A little expensive but a good quality product. Make sure one bottle is enough, I am using it on small diaramas so it will go a bit further. Not the cheapest method of adding water to a model but it is very easy and produces good results

la marque WOODLAND SCENICS est pour moi la meilleures dans le domaine du diorama . le réalisme est époustouflant ! merci les USA .....

es muy bueno, lo mejor, creo que compraré más cuando lo termine aunque podía ser un poco más económico..... Pero Bueno

Der Wassereffekt funktioniert sehr gut. Ich verwende das Realistic Water für kleine Miniaturbrunnen und bin sehr zufrieden mit den Ergebnissen.

Great product. Thank you