---
product_id: 68067829
title: "ANYCUBICPLA Filament 1.75mm, 3D Printer Filament, Dimensional Accuracy +/- 0.02mm, 1KG Spool"
brand: "anycubic"
price: "S$63"
currency: SGD
in_stock: true
reviews_count: 4
url: https://www.desertcart.sg/products/68067829-anycubicpla-filament-1-75mm-3d-printer-filament-dimensional-accuracy-0
store_origin: SG
region: Singapore
---

# ANYCUBICPLA Filament 1.75mm, 3D Printer Filament, Dimensional Accuracy +/- 0.02mm, 1KG Spool

**Brand:** anycubic
**Price:** S$63
**Availability:** ✅ In Stock

## Quick Answers

- **What is this?** ANYCUBICPLA Filament 1.75mm, 3D Printer Filament, Dimensional Accuracy +/- 0.02mm, 1KG Spool by anycubic
- **How much does it cost?** S$63 with free shipping
- **Is it available?** Yes, in stock and ready to ship
- **Where can I buy it?** [www.desertcart.sg](https://www.desertcart.sg/products/68067829-anycubicpla-filament-1-75mm-3d-printer-filament-dimensional-accuracy-0)

## Best For

- anycubic enthusiasts

## Why This Product

- Trusted anycubic brand quality
- Free international shipping included
- Worldwide delivery with tracking
- 15-day hassle-free returns

## Description

ANYCUBICPLA Filament 1.75mm, 3D Printer Filament, Dimensional Accuracy +/- 0.02mm, 1KG Spool

## Features

- About this item     Dimensional Tolerance ±0.02mm: 3D printer filaments are produced with more precise specifications and have a tolerance of only +/- 0.02 mm. Perfect roundness and very tight diameter tolerance, approximately 330 m of filament on each spool ease of use, minimal warping, no odour, no clogging, no bubbles. Give you a wonderful printing experience.     100% Environmental Friendly: Made with starch raw materials derived from renewable plant resources, biodegradable and eco-friendly, non-toxic and low odour. Ultimately generates carbon dioxide and water without polluting the environment. Comply with the Restriction of Hazardous Substance (RoHS) directive and are free from potentially hazardous substances.     Compatible with Most FDM 3D printers and 3D Pen: Works and harmonizes perfectly with all common 1.75mm FDM 3D printers, thanks to the high-quality standards in terms of manufacturing accuracy and the small tolerance in diameter of +/- 0.02mm.     Vacuumed Sealed Packaging: This will enable you to easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging, prevent nozzle jams and yield smooth 3D models.     Updated Version & Customer Support: Package Include 1*2.2 LBS (1KG) PLA 3d printer updated version filament of you choose. Fast and effective 24 x 7 professional customer support providing technical solutions.

## Images

![ANYCUBICPLA Filament 1.75mm, 3D Printer Filament, Dimensional Accuracy +/- 0.02mm, 1KG Spool - Image 1](https://m.media-amazon.com/images/I/71STny2j+qL.jpg)
![ANYCUBICPLA Filament 1.75mm, 3D Printer Filament, Dimensional Accuracy +/- 0.02mm, 1KG Spool - Image 2](https://m.media-amazon.com/images/I/718RF6Lt4bL.jpg)
![ANYCUBICPLA Filament 1.75mm, 3D Printer Filament, Dimensional Accuracy +/- 0.02mm, 1KG Spool - Image 3](https://m.media-amazon.com/images/I/713ETxWPtoL.jpg)
![ANYCUBICPLA Filament 1.75mm, 3D Printer Filament, Dimensional Accuracy +/- 0.02mm, 1KG Spool - Image 4](https://m.media-amazon.com/images/I/71tosLn7tPL.jpg)
![ANYCUBICPLA Filament 1.75mm, 3D Printer Filament, Dimensional Accuracy +/- 0.02mm, 1KG Spool - Image 5](https://m.media-amazon.com/images/I/71FxyCSJc3L.jpg)

## Available Options

This product comes in different **Colour Name** options.

## Customer Reviews

### ⭐⭐⭐⭐⭐ 







  
  
    High expectations that delivered
  

*by T***N on Reviewed in the United Kingdom on 24 July 2018*

The media could not be loaded.
                
            
                
            
        
    
    










  
  
    
   My primary 3D printer is the 

  
Anycubic i3 Mega









  
  
    
   and has given me nothing but great prints (providing the settings are on point) so I had high expectation from their own brand of PLA. I received both the Orange and the 

  
Black









  
  
    
  . Even though the photos and video I've uploaded feature the orange, I have played around with both and found them equal in quality.The black is more like a slate black; with the orange also a little more toned down as opposed to the electric neon oranges I've bought from other brands - I don't have to squint to look at this roll. The finish is more semi-gloss/satin rather than a high shine or a complete matt, sitting inbetween. The feel of the rolled PLA and finished prints is silky smooth to the touch too.Regarding the tolerances, I found the filament was almost entirely 1.75mm and although stated there's a 0.2mm+/- tolerance, this could go down to 1.71mm. However in all my time 3D printing, an extra 10 microns is not going to cause you any issues. I didn't find many areas where it exceeded 1.75mm either. I've had much more expensive PLAs that although performed great, had greater dimensional variations than the Anycubic.I decided to print a low-poly Charmander as my first test - it definitely suited the orange well. I printed this at a 0.2mm layer height (maximum res for the i3 Mega). It's worth noting for anyone relatively new to 3D printing that I have been perfecting my Cura (slicer software) settings for almost a year and even now I still fiddle with them. 99/100 print errors are because your settings are wrong rather than it being a problem with your filament (often just slow your print down to improve quality).Anycubic recommend printing between 190-220c. I'm used to printing at 175-185c but decided to punt for 200c and found this was definitely the best temperature resulting in no warping or stringing. Anycubic also recommend a print speed between 50-100m/s; in my opinion, this is far too fast. I printed the Charmander in 45~ minutes at 15% infill and 25m/s speed. From this, the support snapped away easily and there was absolutely no stringing, layer issues or any of the common gripes associated with FDM 3D printing. Just make sure you have your retraction settings setup well - this applies to all filament.As you can see in my video montage, the PLA comes out like butter, seriously, if I didn't know better,  I'd try and eat it (don't!). It's smooth, bubble-free and settles on the build plate and subsequent layers like it's being gently smoothed on. At 0.2mm layer height, there are almost no layer lines and the Charmander does not immediately feel like a 3D printed part at all.Overall I am mega impressed. As PLA prices are coming down dramatically, this is not the cheapest and whilst definitely not the most expensive, it has the same quality and feel of the ultra-premium plastics.N.B. I was sent the PLA by Anycubic who asked if I'd like to try it out as I had emailed them to order some spare fans for my printer. There was no pressure to give a good review and no offer of compensation (money or product) if I did. I'm putting the effort into this review because I am hugely passionate about 3D printing and finding good PLA is like gold-dust.

### ⭐⭐⭐⭐⭐ 







  
  
    Works well - but be aware of how they solicit reviews
  

*by P***D on Reviewed in the United Kingdom on 23 May 2020*

I was really pleased with this filament and even more pleased when anycubic offered me some shopsoiled filament in return for some photos of the prints. I was happy to send them some images, then....they wanted a 5* review and when I objected they said that I could post any review I wished.I like the filament, I didn't get any incentives for my review, but be aware that may not be true of all reviews of anycubic products because of the way that they operate.

### ⭐⭐⭐⭐⭐ 







  
  
    Anycubic Filament, precise, excellent finish and totally reliable
  

*by J***R on Reviewed in the United Kingdom on 15 June 2019*

The media could not be loaded.
                
            
                
            
        
    
    










  
  
    
   When printing a complex working clock escapement on my Anycubic i3 Mega-S, I decided to use Anycubic original PLA 1.75mm Filament. Previous use of their filament never let me down, unlike other PLA's. All the components, including springs and gears were printed with their PLA using a 0.4 nozzle. The gears needed to be smooth and accurate and the springs strong and consistent throughout their length. The finished project is  first class and works precisely as designed. As always with the Anycubic Ultrabase, adhesion to the base is excellent.From my experience with Anycubic Filament on my i3 Mega-S, I will only use Anycubic filament and can highly recommend it.

---

## Why Shop on Desertcart?

- 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016
- 🌍 **Shop Globally** — Access 737+ million products across 21 categories
- 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price
- 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members)
- 🔒 **Secure Payments** — Trusted payment options with buyer protection
- ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews

**Shop now:** [https://www.desertcart.sg/products/68067829-anycubicpla-filament-1-75mm-3d-printer-filament-dimensional-accuracy-0](https://www.desertcart.sg/products/68067829-anycubicpla-filament-1-75mm-3d-printer-filament-dimensional-accuracy-0)

---

*Product available on Desertcart Singapore*
*Store origin: SG*
*Last updated: 2026-02-09*