F FORITO 2-Pack 15.6 Inch Anti Blue Light Laptop Screen Protector, Eye Protection Anti Glare Matte Computer Screen Cover for 15.6" Laptop with 16:9 Aspect Ratio, Reduce Eye Strain and Touch Sensitive

It perfectly fit my Asus Vivobook S and it got rid of basically all glare and reflections. It was relatively easy to apply and I have no problems after applying.

First of all, I love the packaging that the product comes in. It was once my job to design packaging for products. I am very impressed with the overall appearance and functionality of each element to this assembly. The instructions were very clear. I must also say the outside graphic was easier to understand for a visual person, than the interior package. Just a little note here: it comes with two glare screens! I suspect one is a back up in case you need one or mess up on the first one? Not sure but, I only had the one laptop, so here we go- After studying the step-by-step instructions I proceeded. The cleaning cloth, the little dust patch and the fiber screen cloth and screen squeegee are wonderful quality for what I got. @The initial application if you follow it and you do it step-by-step it’s not unlike doing contact paper if you’ve ever worked with that before. The difference of course is this is a thicker grade of plastic if you will and you want to make sure you get the right side on the monitor screen, because that’s what sticks to the screen and will stay in place. Once you squeegee the whole thing down and get all the air bubbles out, it should fit beautifully within your screen parameters, given you’ve got the right size. Mine was a 14 inch HP screen. A very generic laptop and it just went down beautifully, almost by magic. It actually makes my laptop look better than it is. I was impressed by the matte finish and silky texture of the overall screen protector. Nothing pisses me off more than having glare come back at me when I’m working; not to mention it’s hard on the back of your eyes after a period of time. It is a relief to have this sight saver. If you have a touch screen weird textures might be uncomfortable after awhile. The silky texture is nice. As a writer I find it very important that you protect your eyes. The overall Amazon review is really good on this product, something the vendor Carries on to their packaging #1 chosen glare screen. For the cost and a few minutes of time it takes to put it on there I give this an A+ plus- very pleased very very please. Especially since I first tried to purchase a glare screen from three different office supply stores, including a major brand electronics store. They didn’t have anything like this. Thank God for Amazon.

It comes 2 in a package, but I only need 1. Other anti-glare screens do not maintain the touch screen capability. This one may even enhance it! Installation instructions are pretty good. It includes one alcohol life, one small dusting cloth and drying, dust absorber sticker.. plenty of stuff to install one touch screen. What do I do with the other? Can I use plain alcohol or some other kind of wet wipe if I find a second screen to do? THE PHOTOS POSTED IN SCRAMBLED ORDER. SORRY. Photo 1 shows the anti-glare screen put in place to be sure it fits. Perfect! Photo 2 shows after placing the guides so that one can follow the instructions and remove side one plastic coating which will adhere to the touch screen directly ... The three guides positioned do not stay in place. Maybe instructions should have told me to thoroughly clean the edge around my screen. So that was a bit of a challenge at hearing them. Because I have done a lot of peel and stick types of things, contact paper, instant lamination, etc, I was able to work with it little by little. Photo 3 I'm not sure if it is showing bubbles or fingerprints, smudges that didn't get cleaned off of my very dirty screen before we started. Photo 4 is an angled view of the black screen showing bubbles, imperfections or grease spots or something. I think I'm happy with it! The touch function works very well! I'm just not sure about those little apparent bubbles or spots that I can't seem to work out. They may not make a tangible difference. Therefore I would guess that the quality is high, the thickness is appropriate and I have no clue how durable it is or whether it can be pulled off and a different one installed later.

There's good and bad here. Good: the protector is great. My computer doesn't have hardly any bezel, and this literally fits the exact screen with no coverage into the tiny bezel. That's pretty darn good. The antiglare is exactly what I wanted, and my eyes don't hurt when I'm using this, and the sun or fluorescent lighting doesn't prevent me from using my computer anymore. I got what I asked for and the product is as described. It's also quite matte which gives the touch screen a nice paperlike feel, which I didn't know that I would LOVE. I have the new Lenovo Yoga C940 15.6" 4K laptop. I bought it for multitasking and note taking in class. This feels so nice to use! The Bad: The package came opened and it appears that someone took the cleaning cloths and the application card. Maybe it didn't come with it? But the description says it should so...? Idk. But I used a microfiber cleaning cloth (for glasses) and some alcohol to clean it and my trusty credit card to set the screen protector with minor bubbles. Honestly, the teeny bubbles I missed Aren't noticeable when the laptop is on, so I'm not too worried about it. Patience is key during application, so I'm not sure having the proper tools would have made any difference. Plus, you have a spare so if you royally screw it up, there's a backup plan. Another thing is that it is quite thick, and you can definitely feel the edges if you swipe from the edge. It's not a big deal once you get used to it. The protector doesn't kill the touch capability, but I can definitely admit that it affects touch response just a little. Again, you get use to it very quickly and it becomes unnoticeable. The clarity is pretty good, but I suspect it's not crystal-ball clear due to the matte effect of the film. It's not bad at all tho, and honestly most matte screens are exactly like this one. I don't feel like it makes anything blurry or unrecognizable. Again, it takes a min to get use to it (unless you have a matte screen on something else, and in that case you're right at home). Overall, I think it's a nice product. I like that there are 2 in the package so if you screwed up the first one, you have one to spare. It's nice to use and it's not too difficult to apply if you take a deep breath and focus. I think that the pros outweigh the cons. And I think the cons become less of a thing after a small adjustment period. ♡♡♡♡PRO TIP♡♡♡♡ Apply the screen protector from left to right (or vise- versa). This makes it much easier to get all the bubbles out. ;)

Anything touch screen needs a protector in my opinion. The perfectionist in me found it a tiny bit difficult to install but that's 100% me seeking perfection. Other than that, its an excellent product!

This product does remove glare very well but it probably goes too far and blurs the image, especially if you have a high pixel density screen (> 200 ppi - pixel per inch). This protector's texture diffuses the light in a way that's too coarse and you lose a lot of fine details. I attached 2 photos that show the difference with and without the protector applied. You see how much halo there is around the individual pixels... Second, this is quite hard to apply properly on such a large surface. Even if you clean the screen properly, some might fall on the screen by the time you are done. Very frustrating. You need close to perfect dust conditions to do this. One commenter mentioned doing it in a humid environment (hot shower on) without any fan or AC on. I have not tried that

I can't give a full comprehensive review as the screen protector doesn't fully cover my screen...100% my fault. I looked at the wrong specs for my laptop and ordered a size too small. Didn't realize it till I started to install it, so I can't return it... also my fault. 😅 HOWEVER, I still put it on and centered it as best I could. The gap wasn't too noticeable for what I usually use my laptop for. It provided a nice, matte view. Greatly reduced the glare on my screen. Touch features were not diminished at all. Didn't notice a difference for blue light, but I wasn't really paying attention for it either. Still have a couple of bubbles close to the edge. Some were kinda hard to get rid of. I also would've liked to have two sets of instillation accessories since there are two screen protectors.

So number one on the explainer list is that this is a plastic film number two is that it is just as clear as the very fragile and difficult to remove tempered glass. It even has the advantage that you can cut the second one and use it for other purposes, whereas you would need a laser cutter to cut tempered glass, which is how they're made. So it is somewhat substantially thicker than the tempered glass that people keep complaining shatters and does all this. And it is like in fact what they use for a bulletproof film or at least a shatterproof film, which gets put on large glass windows to keep them from bursting into the room if they get pierced. And the quality is almost there not quite. In my opinion having just installed one, it should be just a little bit thicker and I'm talking like maybe an additional third. Maybe that's hard to spec. I don't know but the coating is excellent and so far it resisted all in any form of scuffing from installation and even though I have blobs of bubbles which I blame on the thinness of the film.The anti-reflection which they call anti-glare just to confuse us, is truly excellent so I'll be cutting a piece of this for my cell phone. And I am not exaggerating - did not have a single fingerprint after my thumb heavy amateurish installation. However, after I watched an expert do it . One thing really wrong and gets the minus one star is the installation package. OMG! WHAT A BIG MESS YOU BETTER BE PREPARED FOR WHILE YOU'RE DOING THIS BECAUSE YOUR HANDS ARE GOING TO BE FULL AND YOU'RE NOT GOING TO WANT THINGS FALLING ON YOU LIKE THEY WERE ON ME BECAUSE I HAD TO DO THIS IN MY CAR FOR REASONS WE SHALL NOT MENTION HERE. So every little speck of dust is going to cause a bubble and it's going to stick to the underside of the film. And you're going to use one of three? Or maybe it's four so-called dust absorbers it's just a more sticky sticker but not too sticky and it doesn't attach itself to the film adhesive. It just sticks to the dust and pulls it off the film adhesive perfect. The actual problem cuz I do product engineering product design. I'm actually a think engineer and a Hands-On designer. So the problem is actually those three stupid little pieces of tape that they call a hinge. Now these are I believe. Well, just less than half an inch across. And really and this is my engineer speaking. They need to be something other than flexible tape. They need to be a little more aggressive adhesive and they need to be at least an inch and a half across. In fact, what they should do is give you hard plastic with a v prepressed into the thing. So you know exactly you line up the v where you want the thing to bend and then it bends in that direction and it doesn't go to 89° 76° or peel off. It stays in place and it bends like a freaking door with hinges. But that's not the case. Fortunately, that doesn't rule out getting it right in the first place because you have almost an infinite number of tries. Especially if you take the time to pre-dust everything. Take your vacuum cleaner and suck the dust using low velocity air only because the high velocity stuff creates static like you wouldn't believe and that's not what you want here or anywhere around a computer. Any computer. 😭

商品到着まで時間がかかるし、何より貼った際空気が入るから何度トライしてもダメ🙅‍♂️ 専門の人にしてもらうか貼らない方がいいと思いました。買い損です

I didnt realize the color is dark blue, threw it away, if you like your screen color full blue go for it.

very satisfied. This is the 5th screen protector I'm buying for my laptop and I'm finally very satisfied with this brand and quality.

Delivery took a longer time than expected. Delivery was safe and packaging was nice. Delivery person was very polite and delivered the product without any hassle

TL;DR - This product works as stated and is worth the money :). I just got the screen protector today and I am very happy with it. The blue light protection and anti-glare stuff make the screen look matte and kind of "older" (not sure if that's the right word), but it didn't affect the clarity of images and such on my screen. Instead of reflecting light directly into my eyes, the screen protector sort of disperses the light (since it's like impossible to just get rid of it) so there aren't any reflections obscuring my view, but there are subtle differences in brightness (preferable to the alternative though). The texture of the screen is great for writing/drawing imo (since its more like paperand gives some much needed resistance to pens or your finger) and it also reduces the amount of smudging on my screen (so thankful cuz I have oily fingers). I bought the 15in screen protector, but I have a 14in laptop so I had to cut it to size, you can see that I didn't do a great job in my photos (right side of screen). However, the parts that I didn't mangle with my pizza cutter fit super snugly onto the screen and look great. I could even watch Hocus Pocus 2 without any real issues. 10/10 gonna see if it protects my screen from dropping 50 ft. :D edit: also it was kinda fun to put on. You can just reverse to get rid of bubbles and its not that hard.