Spigen EZ Fit [2 Pack] Screen Protector for iPhone 17 Pro/ 17/16 Pro | 9H Hardness Tempered Glass, Easy Installation Kit, Case-Friendly, Crystal Clear, Touch Responsive, Oleophobic Coating

My previous screen protector for my iPhone 16 Pro Max cracked, so I needed a new one. I tried a couple of cheaper replacements, but they were plagued by bubbles. So I paid a little more for this Spigen protector. It comes with a fitting guide made of rigid plastic, glass cleaner, small microfibre cloth and a dust remover. I recommend watching the installation video (there’s a QR code and a website address to find this. Simple and easy to follow.) The result? Brilliant. Following the instructions, installation was easy, and the provided anti-bubble tool removed all the bubbles. So I now have great bubble-free visibility: I would not know there was a protector fitted. The touch screen responds as it did before the protector was fitted, and I am confident that the protector is durable. Oh, and there are two protectors included with all the extras. Great value for money.

I’ve always been quite skilled at applying screen protectors. I got a new iPhone 16 Plus and used my usual brand (yellow box) with a basic applicator tool. Despite my confidence, I ended up wasting all three protectors in the pack because the bubbles were so bad each time, plus there was room for error with the tool’s positioning and they came out a little wonky. On the third time I accepted the bubbles, and when I looked at my phone a couple of hours later, there was already a huge crack in the protector! No idea how as it was just sat on my MagSafe charger! After a bit of research I decided to go for this brand with the applicator. It’s applied flawlessly. Perfectly positioned, and not a bubble in sight. Well worth the extra cost if you’re particular about bubbles.

Despite taking a lot of care, I’ve had my share of disasters in the past trying to fit a screen protector perfectly without air bubbles or a tiny speck of dust so I “um’d and ah’d” about buying this. In fact I was very tempted go to a shop and get a glass screen protector fitted ‘professionally’ - but in the event I’m glad I bought this. It’s actually really easy to fit if you follow the detailed instructions and/or the YouTube video. I’ve only just put it on my lovely new iPhone 17 so I can’t yet comment on it’s toughness or robustness but it looks perfect - not a bubble or a speck of dust in sight! To look at the phone you wouldn’t know there was a screen protector on it. I’ve used Spigen cases several times in the past so I was confident that it would be a quality product. And don’t worry - in the unlikely event that you somehow manage to mess up with the first one or it does get chipped or cracked - you get a second screen protector in box.

So contrary to what someone else's review said - the unit I got sent out looked to be the same size as my 14 Pro Max but actually, it does fit the 16 Pro Max, so perhaps the size on the sticker on the package was incorrect. However, the install process, while easier than most cheaper ones, still allows dust to get under the protector. I ended up going through both of the glass panels in the box because the first time, I wasn't fast enough and dust got under the screen. I have previously used a brand called LK for screen protectors and love them because their install process includes a static sheet which takes all the dust with it when installing - but as of writing, they aren't available for this phone yet. Another thing to note is that the edges of the glass feel "sharp" compared to others I've used in the past, If you're swiping up from the bottom of the screen to exit an app, I've felt my finger rub against the bottom of the protector and it is not smoothed off at the edges. Overall, for the price, it's good quality and an easier setup process than those companies that just send you sheets of glass and stickers to align it yourself. But as soon as LK release one for the 16 Pro Max, I will probably look to get a set of those.

Love spigen ez fit glass screen protectors, installation is easy to put on & are always hard wearing & durable. Always lasted longer than other screen protectors I’ve bought before & would recommend to buy.

Not the cheapest screen protectors by any means but they are worth it. Having tried many different types of screen protectors with varying degrees of success, these do the job first time. Decent and easy to follow instructions you will have this on properly within minutes. There's a jig which helps you get the protector in exactly the right place, all the tools you need to ensure the screen is clean, dust free and without bubbles. Don't you just hate that tiny wee particle of dust under the protector, to be fair there isn't much you can do to avoid it apart from applying in a clean room however, plenty little stickers to help you out. This time around, no dust under the screen. Had the original on my phone for over a year and it protected it magnificently *but there was that one spec of dust- grr). Had to replace it as something was dropped on the screen. No damage at all on the screen so it did its job brilliantly. Haven't noticed any difference in the responsiveness of the screen compared to it not being applied. Do yourself a little favour and protect that screen. about £18 for 2 is way better than a screen repair.

Bought this screen protector for my new iPhone 17. After buying many different screen protectors for previous iPhones and never getting one that was easy to fix I decided to buy this Spigen. Firstly I have got to say that I was sceptical about whether or not this would be any better or easier to fit than any of the others. How wrong was I. Following the video on the correct way to install the screen it was very easy and straightforward to get the screen protector on first time and without any air bubbles. What a difference a simple plastic applicator makes, aligning the protector perfectly onto the phone in one go. The package contains everything needed to make this possible including two screen protectors two applicators two wipes and two dust removers. Not the cheapest but definitely worth the money. Just read the instructions watch the video prepare everything in advance and you will have no problem using this.

I’ve used Spigen screen protectors for years, so I picked up the Glas.tR EZ Fit for my iPhone 17 Pro Max expecting the same reliable quality. The installation kit is great you get alcohol wipes, dust‑removal stickers, and the EZ Fit frame, which makes alignment basically foolproof. Both protectors in the box were easy to apply with no bubbles at all. However, there’s one issue I can’t ignore: the rainbow effect around the corners and edges. It’s not dust or trapped air — I cleaned the screen properly, used the wipes and stickers, and even tried the second protector just to be sure. Both of them had the same rainbow halo around the edges once applied. The protector itself feels smooth and responsive, and clarity is good in the centre of the screen, but the rainbowing on the edges is noticeable, especially on lighter backgrounds. If Spigen can fix the edge effect, this would be an excellent protector. As it stands, the installation experience is great, but the final look isn’t as clean as I expected.

ok

Spigen’s tempered glass fit for the iPhone 15 Pro is excellent, it doesn’t have any borders which will expand the bezels, and any tight phone casing will not lift the screen protector up. However, this means that there will still be a slight gap for dust to creep in. I have been using their tempered glass for a long while and each pack has 2 pieces. The easy application tray helps cut down the application time. I don’t usually have a problem applying screen protectors myself but this makes it super easy. Squeegee included in packaging helps smooth out all the bubbles. The dust sticker included is also generous. I just use the biggest piece to lift up all the dust particles before application. And best part? Each piece lasts me 2 years before the coating wears off and I need to replace them.

As capas e películas desta marca, são muito confiáveis, por ultimo usei uma capa para meu iphone 14 pro, original da apple, o telefone quebrou a traseira toda. Quando usei a capa da spigen em meu modelo anterior, nunca tive problema, com inumeras quedas, o telefone sempre esteve protegido

I’ve used these screen protectors for a few years now and keep coming back because of the straightforward application process. When applying screen protectors you will face two main challenges: 1) alignment & 2) dust & fibres 1) Alignment - Solved These screen protectors come mounted on a jig designed to align with the phone perfectly. The snug fit of the jig ensures that the protector is correctly aligned with the screen (and cutouts, if applicable) “the first time you do it!” 2) Dust & Fibres - partially solved There’s no easy solution to this but the kit includes the pieces that make this challenge easier. Here’s some additional comments on steps to follow to make this a success: 1) remove your phone cover - the jig is designed to fit snugly on the phone and anything else on it will get in the way 2) have a well lit area to work - looking for dust and fibres on the screen isn’t easy BUT good lighting will help 3) turn off fans etc. - small dust and fibre particles will easily blow around. This will reduce the chances of something settling on your screen at the last moment 4) use the provided materials - they are there for a reason 5) check orientation of the jig to the phone - make sure the indications on the jig for the top AND the top of your phone are aligned 6) wet wipe - go right to the edges, it’s better to clean a bit further than where the screen connects 7) carefully inspect for dust and use the tape to remove anything you see 8) lift the edge of the protective film so it can be easily removed BUT don’t remove it yet - do another check and tape removal of dust and fibre then remove the protective film and promptly mount 9) keep the sticky surface facing down - harder for the dust to go up! 10) read and follow the directions they provide (they are enough but the above tips should be useful too!) 11) admire your handy work. It is satisfying when it’s done right, so give yourself a pat on the back when you’ve done it well! If you’re going to use a screen protector (I have without fail for years) do it from the very beginning when your screen is still clean and scratch free. Screen protectors are not absolutely necessary on high end phones like the iPhone Pro models which have VERY hard and strong glass BUT glass can get scratched. Less high end models will scratch easier! If resale or a longer life to your phone is important, then I thoroughly recommend using them, and for a few years now, this protector and application method has been my “go-to “ for ease and quality.

Çok başarılı bir ürün. Ucuz etin yağnisi gibi bir çok ucuz ürün alıp çıkarıp attım. Ürünü yanlış takmama rağmen düzeltebildim. Videoyu iyi izlerseniz sıkıntı yaşamazsınız. Ekranı güzel silin. Yapıştırıcı ile tozları alın. Üstüne kılıfı koymadan önce alttan ilk yapıştırıcıyı çıkarın. Ben onu atladığım için düzgün yapıştıramadım. Onur çıkardıktan sonra kılıfı takın. Üstteki yapıştırıcıyı bastırıp en az 30 saniye bekleyin ve sonra kılıfı çıkarın. Bir kaç baloncuk oluşıyor ama gelen aparatla hepsi yok oluyor. Ekran dokunmatik hassasiyeti ve ekran görünürlüğü çok iyi.