[10-Pack] PROCURU Heavy Duty Angle Stop Valve 1/2" Nominal (5/8" OD) Compression x 3/8" OD, 1/4-Turn Operation (PCAS12-10P)

Very durable, easy to install, great price

The "[10-Pack] PROCURU Heavy Duty Angle Stop Valve 1/2" Nominal (5/8" OD) Compression x 3/8" OD, 1/4-Turn Operation (PCAS12-10P)" arrived in disarray. The small cardboard box that contained all 10 was not sealed with tape, and during shipment all contents flew out. Fortunately this was the only problem; in all other respects, these angle valves are working great. The valves are made of brass, including the inner ball that rotates. They open and close smoothly, and the lever does not wiggle or feel flimsy in any way. I had a contractor install five of them already, and none of them exhibited any leaks or other problems. The ferrules wrapped onto the copper pipes smoothly. The nuts threaded onto the valves comfortably. All dimensions for connections to inlet and outlet were spot-on. I rate this five stars.

I remodel condominiums built in the mid 80's. Many have shutoff valves that don't close fully and ooze water from the stem. It's quicker and cheaper to replace those valves than to rebuild them. These stop valves are great replacements. It takes about 30 seconds to swap out the old valve body. No need to cut the pipe or replace the compression ring, just screw the new body onto the old compression nut. No drips, no dribbles, no leaks.

The durability of the product is very good. It doesn’t have a plastic valve inside. It is a true metal valve, which will not leak for many years. The seal is very good because it is metal versus big box stores selling the plastic ones even though the outside looks metal. The inside is actually plastic. The installation is typical with any type of valve.

Old valve had a drip so you couldn't completely turn it off and it was the old style that required several complete turns before it would shut off, which was not convenient or practical. These are really good and didn't take much effort to install. No leaks. Only "complaint" is they don't seem to flow as much as the old valve. I'd say it's got some built in water restriction and probably flows 70-80% compared to old valve (which might be new "code")

The image above is before and after! These shut-off valves are valuable for the cost. They don't provide as many valves as this seller does, when compared to Lowe's and Home Depot. These are the greatest. I am not a fan of the plastic items from Lowe's and Home Depot. Installation is extremely simple. You need to possess the correct tools. The customer service is fantastic. If you encounter any problems, they will be there to assist you! I suggest this to everyone :)

These angle stops are the best price for 10 that I’ve been able to find. They function well and easy to install. If you have a puller for the washer or in some cases, you can use the old washer if it’s not damaged.

Well made product that should have a long service life.