VEVOR Spray Paint Pressure Pot, 10 L/2.5 gal Fully Automatic Stirring Pressure Pot Tank, 70 psi Adjustale Pressure, Pressure Pot Paint Tank with Spray Gun and Hoses, for Home Decor Industry Painting

This pressure pot is amazing!!!! Its very easy to use, especially for what i’m doing which is resin casting. It shrinks 99.99% to 100% of the bubbles. So the only issue I ran into was the package it came in. It was a good honey comb cardboard with wooden boards on both top and bottom. It was heavily taped, but was so difficult to remove. I had to rip It apart one by one. I really wanted to have stored the device without destroying the box. As far as device itself, i found nothing wrong with it. The first thing i did was find the correct nozzles and hook ups for it then the proper hose and connectors for the hose, unfortunately the pressure pot doesn’t come with these things. Lucky i already had those items. Then, Once i figured what position the nozzle switches had to be in order for the air to flow through the hose, i sealed the lid by tightening up the large butterfly screws. Once the pot was seal and secure, i got my air compressor, which you’ll need to supply the pressure pot with pressure and i connected the other side of the hose to the air compressor. As soon as they were connected, i could hear some air escaping probably through the nozzle connector, which is common, when starting out. That is why you’re also supplied with the thread solvent to prevent air from escaping through the threads. Never-the-less, Pressure was still building up in the pot and it was doing its job. I turned the fluid outlet nozzle switch to off to prevent the pot from building more pressure and i quickly detached the end of the hose that was connected to the air compressor. There was no sound of leakage coming from the pressure pot so i knew it was a success!! To release the pressure or let the air out , i simply put the nozzle switch in the on position which lets the air escape and lowers the pressure. Once the gaige reaches zero, it is safe to unscrew the 4 butterfly screws.

Great pressure tank for the price! Seals still needed a little help but a bit of sealant around the threats and it was golden! Dials were easy to read and easy to use. Great for my craft projects!

took me a second to get the right air compressor, but the pressure pot itself is easy, airtight, and sturdy. as someone who does a lot of molds i probably should have gotten a bigger one but i diy’d a shelf to put inside it so i can fit more!

I would give this 5 stars but the instruction manual wasn’t great. The photos are so poorly printed and hard to discern that I had to watch a YouTube video made by someone unaffiliated with Vevor to make sure I knew how to operate it. Since I’m just using it for resin casting I connected it to a bicycle pump using these parts: - 1/4” NPT male to Schrader valve male - 1/4” air line quick connect to 1/4” NPT female - Teflon tape on the NPT threads Otherwise it’s been great - it comes with the metal base plate for resin casting, it’s easy to use, maintains pressure, and reduces bubbles as expected. It can be super loud when depressurizing, glad I saw a tip from someone else about going slow, it’s definitely a lot louder than a pressure cooker!

I bought this for casting resin and it did not disappoint. I have used it countless times now and it has worked flawlessly every time. The only thing that would have been better would be if I had bought the bigger one so I could cast more at a time.

Great for pressurizing dice and other resin projects! Basically ready out of the box, just had to remove the paint outlet tube which took about 30 seconds. So far no leaks, holds pressure great overnight. In my opinion the ease of use and quality build is absolutely worth the slight extra cost vs rigging up your own.

It works perfect

Really love this pressure pot it is so easy to use