Matte PLA Filament Navy Blue 1KG, 1.75mm 3D Printer Filament Dimensional Accuracy +/- 0.02mm, 1kg Carboard Spool (2.2lbs) Fits for Most FDM 3D Printers

Elegoo Matt is my go to filament of choice. It prints amazingly in my Bambu X1C with very few print failures. Things it does great at. Bed adhesion - I have never had to worry about first layer issues with this stuff, if anything it manages to stick just a little too well, needing a little patience for it to cool before removing from the plate. Colour matching - I've bought quite a few rolls of similar colours are various time intervals over the last year or so since I started using it. The colours seem to match excellently with little variance. Whilst I'm reviewing the black and white here, I have quite a lot of the colour option and the same goes for all of them. It's my go to filament.

Prints well and gives a nice looking finish

Really good quality filament with a nice matt finish. Bed adhesion was great on both sides of the standard Elegoo carbon 2 build plate.

Excellent quality as usual

Using with a Bambu A1 Mini - works well for printing, though maybe a tad more stringy than the Bambu stuff. Where I did have issues was with the cardboard spool - when the filament gets caught around the edge there's a lot of friction, and it stopped my printer twice mid-print. I printed a spool centre for it that made it easier to turn and that improved things, though I still had it stop when the filament itself was tangled, thought hat was likely a side effect of removing it to print the spool centre with other PLA. With the printed spool centre it's hard to complain about the price.

Printed well, no issues in feeding or retracting with AMS.

Perfect wood colour filament

Good matte finish. Prints well

Elego matt black is worth Don't go for grey so many entangle issue I would rate 5/5 for matt black and 1/5 for matt grey

J'ai testé énormément de filaments, mais ce PLA Matte Noir de chez ELEGOO est une véritable révélation ! Si vous cherchez un rendu ultra-qualitatif qui fait instantanément "produit fini" et professionnel, ne cherchez plus. Voici pourquoi ce filament est devenu mon indispensable absolu : Rendu esthétique incroyable : Le noir est profond, d'un mat parfait et totalement uniforme. Il masque superbement les lignes de couche (layers). Les pièces imprimées n'ont pas cet aspect "plastique brillant" habituel ; on dirait de l'injection plastique haut de gamme ou une pièce usinée. C'est parfait pour les projets fonctionnels, le prototypage ou les objets design. Facilité d'impression déconcertante : Il s'imprime comme un charme. Aucune galère de warping (décollement), une excellente adhérence au plateau et entre les couches. L'enroulement de la bobine est impeccable (pas de nœuds), ce qui permet de lancer de longues impressions les yeux fermés. Zéro stringing : Même sur des géométries complexes ou des pièces avec beaucoup de rétractations, le résultat est d'une propreté chirurgicale. Pas de petits cheveux d'ange à nettoyer post-impression. Rapport qualité/prix imbattable : ELEGOO frappe très fort. Avoir une telle constance dans le diamètre et une telle qualité de finition à ce prix-là, c'est tout simplement bluffant. En résumé : Un filament fiable, tolérant et qui sublimera toutes vos impressions 3D. Je recommande les yeux fermés et je vais commander à nouveau sans hésiter. Foncez !

Ich habe das ELEGOO Matte PLA in Marineblau ausprobiert und bin insgesamt sehr zufrieden mit dem Ergebnis. Die Farbe ist wirklich schön – ein tiefes, edles Blau mit einer matten Oberfläche, die den gedruckten Objekten einen hochwertigen Look verleiht. Gerade bei dekorativen oder sichtbaren Teilen sieht das deutlich professioneller aus als glänzendes Standard-PLA. Das Filament kam sauber aufgespult und gut verpackt an. Die Druckeigenschaften sind einwandfrei – kein Verstopfen, kein Stringing, und die Layer haften sauber aufeinander. Die Maßgenauigkeit scheint tatsächlich sehr stabil zu sein, meine Drucke sind maßhaltig und passgenau, auch bei mechanischen Teilen. Ich drucke auf einem Bambu Lab X1C, und mit den Standard-PLA-Settings läuft es problemlos. Besonders gut gefällt mir die matte Oberfläche – sie kaschiert kleine Druckfehler besser und fühlt sich angenehm an. Einziger kleiner Nachteil: Die erste Schicht haftet minimal schlechter als bei glänzendem PLA, aber mit leicht angepasstem Z-Offset ist das kein Problem. Fazit: Ein tolles PLA-Filament mit mattem Finish und starker Druckqualität. Ich werde es definitiv wieder bestellen – auch in anderen Farben!

Jätte fina färger . Super nöjd

I took a chance and ordered this because I needed something similar in color to Bambu Labs Matte Lilac Purple and I needed it quick and in a hurry. I ran out printing my impatient 9yo daughter an axolotl and since this is one of her fav colors, and BL shipments can range anywhere from 3 days to over a wk, I went this route. I've had really good results with Elegoos neon green PLA+ in the past so I took the chance here, and it paid off! It's nearly identical in color and prints with the exact same settings as the BL matte pla on my BL printers. The neon green did as well. Both have a good deep color saturation and layer lines on her axolotl are almost nonexistent besides the top of the head. I printed the axolotl with a .6 nozzle and I'm sure I could've done more with the variable layer lines but its good enough for us. She's happy so I'm happy. The wife liked the color so much she has me printing her a Stanley cup chapstick holder as we speak, haha. No issues in the AMS either though I will print some spool rings eventually. No issues with snags or serious bends in the cardboard spools binding up the AMS. Fits nice and tight on the A1 Minis AMS Lite as well if anyone was wondering. I did dry it before use but I believe it would've been just fine out of the box. 10 out of 10 will buy again. I'll add a cpl pix of prints in the green as well. FYI: The purple pairs well with my daughters 2nd fav color, hot pink. Haha