Cable Matters 2-Pack 40Gbps Flat Right Angle USB C Adapter, Up to [4K@240Hz Video, 240W Charging, 40Gbps Data Transfer] 90 Degree USB C Adapter, Compatible with Thunderbolt 4, iPhone 16, Steam Deck

(Combo - Vertical) Was having trouble with the USB C cable on my 6400mAh KIWI design Comfort Battery Head Strap (B09XF69CR9) fitting loosely in the headset and falling out enough to stop charging. Thought it was just the plug being super loose and not being able to snap in but it was actually the opposite sort of problem. The male USB C plug on the strap was just a SUPER tight fit. Plugging it into the adapter required a lot of force but I'd much rather break a ~$5 adapter or $60 battery strap than the VR headset worth hundreds of dollars! The adapter plugs into the headset snugly and without spooky amounts of force being needed. Little bit of a pain to unplug as again, it is snug, but you can safely unplug it without breaking anything and it's going nowhere even during very active gameplay. It absolutely has sufficient power transfer to keep the VR set charged. Just got finished playing around 6-7 hours of H3VR and it performed flawlessly. The battery pack was able to fully drain before the headset started showing any drain in the UI. The smudges on the adapter in shown in my images are sweat btw, I played hard. They came looking clean and unblemished. Prior to my VR session I also made sure both adapters allowed the headset to charge. It held up be me squeezing it with the obscene amount of force the headset's cable needed to finally click into it just fine. Definitely seems to be a pretty solidly made product so far. Worst case the pack cost me just under $10 after tax and it comes with two different adapters that should both work fine for the task. If you're having trouble with your KIWI battery strap this is a very simple and affordable solution for the problem both in terms of time and money. I'd highly recommend trying this simple adapter before going the return and replace route. I strongly recommend plugging the battery pack cable into the adapter first THEN plugging the adapter into the headset. Don't risk the port on the headset by doing it the other way around.

Fit is nice and snug on both sides. No cable falling out. Was worried the one I use wouldn't fit with my phone case, but luckily the case is thin enough it works fine. I haven't noticed any temp issues, but again, I am simply using it on my phone, not anything like a laptop. I'm only running enough wattage to quick charge my phone, coming from a port on a USB hub meant for quick charging, and a cord that maxes at 15 watts. So make of that what you will. I got these cause I lost the last angle adapter I had, and due to pain, I often lay propped up in bed and dick around on my phone, and I will often rest my phone on my chest. When it's charging, I'm bending the cord. A concern I had was how I hold my phone when I'm not testing it on my chest, as I rest it on my pinkies. Luckily it hasn't interfered. Again, I am just using it for a phone, so I can't say anything about how it works with a laptop. I also am not connecting my phone to my PC, so I have no idea how it works with data transfer speeds. But as a simple device to change the angle of my phone cord, it works fantastic.

These work great and allow you to minimize cable bump outs on your connected devices like a spare monitor, tablet, or phone. Does not slow down data transfer.

I only use this to power my Carplay screen in my car. No data transfer. Works perfectly for that, not bulky. Connection is a tiny bit wiggly, but it holds in well and the wiggle could be entirely on the screen. Overall 8/10. Only because I haven’t tested data transfer.

I use this for my truck battery pack and Starlink. Enabled me no to gas a wire sticking out and potentially get broken. It fits well, is compact and compatible with my devices and has been easy to use with great quality.

These do what they claim. There's a number of other options out there but these were the smallest/sleekest, especially for the sideways one, so I gave them a try. They plug in really tight, both on the male end going into your device, and the female end accepting a cable/device. This can be really nice since you don't want adapters like this to be loose or flimsy. On the other hand they can be tough to remove. The female side is a bit more forgiving, so I imagine if you accidentally snagged a cable, it would pull out cleanly on that end. I don't really have anything that can push the power and data rates to the max, but did confirm they work up to 10Gbps and ~35W. No reason to believe they'd have any issues reaching the advertised rates of 40Gbps/240W. I don't have any USB-C displays, so couldn't test that. I used an external USB-C NVMe drive/enclosure to test the data throughput. I had a lot of problems getting the drive to show up when using either adapter. It would detect the drive but sometimes throw errors (a device which does not exist was specified) when trying to access it. Ultimately it did show up and speeds were the same both with and without the adapter, but it was concerning that it took so long to get it to work. Had the problem on two different computers, and always worked fine without the adapter. Maybe it was something else, but it didn't seem that way. I don't plan on using these for any type of external drive so it doesn't concern me, but figured it was worth mentioning. All other devices I tried this with - power input for laptop and a phone, mouse/keyboard/headset, simple thumb drives, etc - worked just fine. Same goes for a USB-C hub with other devices then plugged into that. Overall I'm pleased with these. Besides the issues with the external NVME drive, they did everything else I expected, exactly as advertised. They're compact and look good. They're also very snug for a secure connection.

Does exactly what it needs to and is from a reputable company. I haven't particularly tested wattage throughput but it seems to work well.

I should just stop shopping now because I have finally found something that advertises to allow video and power with a thunderbolt cord and it actually works! These are a game changer for me!

Do what it to do

Bought these to use with action cameras on the 'bike. Basically I wanted to run cables to the camera from a power bank to avoid stops to change batteries in the cameras. Ideally I didn't want cables sticking out from the cameras, and inevitably the various cameras have different orientations of their USB ports. Using these lets me use my existing 'straight' cables rather than shelling out for yet more dedicated cables. As usual with Cable Matters kit the build quality is good, the fit is reassuringly firm and the adapters aren't overly bulky. So far everything's working nicely. Happy to have found/purchased these.

Each adapter weights only 4g. These things work great, as advertised. I use it to connect a 10 Gbps external SSD, works without a problem. I also use these to connect an external USB-C portable monitor, and it also works without a single problem. In fact, I use these adapters on both ends of the cable - one adapter in my monitor, the other adapter in my laptop, and the cable is in-between the adapters. It still works fine. I love this product is made by a reputable brand so I don't really have to worry about anything going wrong, despite the fact these kind of adapters are not allowed by the USB-C standard.

Dieses Produkt ist genau das, was ich gesucht habe! Die Qualität ist hervorragend, es ist robust verarbeitet und erfüllt seinen Zweck perfekt. Besonders positiv ist mir die einfache Handhabung aufgefallen – es funktioniert zuverlässig und ohne Probleme. Insgesamt bin ich mehr als zufrieden und würde es jederzeit wieder kaufen. Eine klare Empfehlung für alle, die nach einem hochwertigen und praktischen Produkt suchen!

Funciona bien con dispositivos que no sean muy demandantes, por ejemplo, teclado, mouse, etc. Pero si necesitas conectar un dispositivo que requiera transferir muchos datos, se desconectará constantemente. No se calentó e igualmente se desconectaba.