FLISSA Pocket Folding Knife with Button Lock and Pocket Clip(Wood)

Nice knife for the price. Had to break in the unlock button and added a tiny amount of silicone spray to it. Now it works fine.

When I received the knife the blade was not tite, it wiggled back n forth, very sloppy, when I pushed the button it wouldn't drop down from lock position, after adjusting properly I got it to drop from open to close position and bounce into close position! A little oil and it works perfect! The lock button is not a good button for this knife! Way to much effort is needed to properly function this knife, but with that said I had to dial it in! But I love the knives looks and functions!!

This was definitely a disappointing shopping experience. I was looking at the many other knife products that Flissa has and I figured it was a big company and worth a try. But it was really disappointing.I know it's a low cost product made in China, but that doesn't mean you can give me a product with safety issues.Flissa, you just can't compete with Eafengrow's workmanship. Their knives aren't much more than $20, but they are very well made and are solid D2 steel.I'm a professional and I would say if you guys don't know how to make a button lock, then don't do it! I know that button locks are the hardest to design compared to linear or axial locks. But you have to make sure it's safe to use. My lock does not work at all, the slightest force breaks the lock and the sharp edges cut my fingers directly. This is absolutely unacceptable.Also, what are you guys doing torquing the two screws on the end of the knife so tremendously? To make the knife completely unrepairable?Despite my criticisms, there are some good points. Surprisingly, the quality of the steel is actually good, I think it might actually be real D2 steel, or another good quality steel like 8cr or 9cr13MoV, and it's very sharp. And I noticed it was used bearings instead of shims, that's a good point too.But the issue of the button lock failing is not acceptable by any means, and that's why I returned it immediately for a refund.

Well made

Good knife just doesn't hold edge long

I love how slim the knife is. The action is smooth. I love it so far

FLISSA like always. Own 6/7 of them now. All about finding price/quality combination for me.

I really like flisa knives, I have 5 of them.I have this model with the button lock in carbon fiber and the lock works perfectly.I purchased the same one with the wood handle and the lock did not work, I called Amazon and they sent a second one and that one also didn't lock correctly.So I'm thinking it most be the wood handle that's the problem.I'm not what I'm going to do now

この価格帯の商品なので購入時の若干のメンテナンスは必要ですが、ブレイドやハンドルの形状は持ちやすく使い心地も快適です。特にハンドル素材の花梨材は密度と硬度が高いことから肌触りが良くて見た目も美しい上に使用時の安心感があります。

久しぶりのナイフ購入です！野営に使うフォールディングナイフでウッドハンドルを探してました、他のレビューより自分の個体は動作は固くは無いですね個体差ですね、紙はスパスパ切れるのでそのままサブナイフとしてフラッシュライトポーチに入れ腰に付けて夜はライトを入れて使います！フォールディングナイフはケースが無いのでイマイチでしたがコレで解決しました！

結構しっかりしてきしみも無い。ファクトリーの組み立ても良いのかブレードを納めてセンターも出ている。重いとレビューしている人もいるが花梨の木のパネルなのでG10仕様より軽いと思う。グリップの握り具合が天然素材の花梨の木と言う事で握り心地は良い。ロック機構もボタンが重めなのでかなり握り込まなければ外れる感じも無いかな。箱出しでメモ用紙がスパスパ切れるからアウトドアで直ぐに使える刃付けはしてあると思う。グリップの花梨の木パネルが天然素材なのでこれから使って水とかはやばそうだから使って良く乾かして油を塗ってメンテしないとヒビ入ったり割れたりしそうなのは仕方ないのかな？後は木パネルの表面に細かな凹凸が有るのは素材のせいなのか？触って感じる物では無いのでまぁ天然素材だからと言う事でこのまま使う予定。天然素材系グリップが好きなのでグリップパネルがオール木なのは良い感じなのだ。あっ、ちゃんと金属ライナーが入っているから表がわだけパネルで花梨木パネルが付いているって感じだよ。

とても素晴らしい商品でした！期待以上の品質で大満足です。まず、デザインが洗練されていて、見た目が非常に美しいです。作りもしっかりしていて、高級感があります。使い心地も抜群で、毎日使うのが楽しみになっています。特に操作性が簡単で、誰でも直感的に使えるのが良いですね。耐久性も優れていて、長く使えそうな印象を受けます。コストパフォーマンスも考えると、非常にお買い得だと思います。

写真上が無加工の物で写真下が椿油を軽く染み込ませた後に亜麻仁油を塗り込んだ物です。オイル加工後に無垢の物も欲しくなりもう一度購入しましたが最初に購入した方は購入直後から少々ガタを感じるので商品に多少のバラつきは有る様です。