EZDIY-FAB PCIe 5.1 12V-2x6 GPU Adapter, 600W, 180 Degree, RVS, White

I personally wouldn't trust any adapter on a 5090 considering how terribly designed the connector is. But on lower end cards, this adapter is perfect. Allows to run the cable directly over the backplate into the side cable routing compartment, so no ugly hanging cable. Would definitely use this again for other builds. If you do want to use it for a 4090/5090, or any very high power card, I would definitely recommend taking an AC Clamp meter and measure the amperage on each line during a Furmark run. If you have even amperage distribution across each 12v live cable, can rest assured you won't have any melting issues. I do this for all build considering how bad the 12vhpwr/12v-2x6 design is.

This little adapter is made of aluminum and feels solidly built. Installation is straightforward. The angular shape and white housing look perfect for my PC. Functionally it's pretty simple, all it does is reroute your graphics card power cable backwards over the top of the card. It's pricey for what it is but you know what you're getting, a little aesthetic accessory.

Feels sturdy and expensive, although it’s bulkier than I expected. I wanted something like this so I didn’t have to flex my 12VHPWR cable 180 degrees, and also have it touching my AIO tubes. This resolved that. This item is both functional and aesthetic!

This 180° adapter is a perfect component for cable management in your builds and is a good value for the money. Functions perfectly well for my 4090, solid connection on the power port, and it's best suited, in my opinion, for vertically mounted GPUs since it hides the power cable out of sight give a cleaner look. I didn't notice any overheating on the connector either so it's safe and will not "melt" your GPU. Overall, I highly recommended this connector for that cleaner look in your PC builds!

My new card was a bit too tight in my case to have the 12VHPWR coming straight out and the glass door was unable to comfortably close. So far, everything seems good to go, but with all these 12VHPWR cable scares and recalls I'd be lying if I said I wasn't nervous having to use an adapter. It was either that or buy a new case, which wasn't in the immediate budget unfortunately. I do feel they are a bit expensive for a hunk of metal and plastic, but as long as it does its job safely, I guess I'm ok with the cost.

Such a clean and minimalistic mod. Compared to the PSU black 12VHPWR cable and to this. Looks so extremely well and does good job hiding the stock cables. Can be perfect edition to your custom pc! I highly recommend this item to everyone and definitely worth the price.

So far works great i will update in future. Seam well made and modern looking.Easy to install just make sure you plug the adapter right to the end and you will be all good.

Easy to install, and has high build quality. This is the 2nd EZDIY-FAB product I have purchased and am extremely satisfied with both. By redirecting the cable, your build is extremely clean.

4090で使用しましたが、高負荷かけても特に問題ないです。 コネクタは不安でしたが、無いとケースに入らない。探した中で一番信用できそうだったのがコレです。 最初はおそるおそるでしたが、コネクタの温度はあまり上がっていなかったので気にせず使うようになりました。

Saved the build, extensions were too stiff, had to get this. Making the build look cleaner and no issues so far. GPU: RTX 5080

玄人志向のRTX 4070Ti Superに交換したら、以前使っていたものは差し込みの長さが浅くて届かなかったのでこちらを見つけて購入しました。差し込み長さも十分でしかもカバーが白いのでぴったりマッチしています。 使い始めてしばらくすると突然画面がブラックアウトする症状が出て、ライザー変えたりグラボをマザボに直付けにしても改善されず、この商品を外して電源ケーブルを直付けしたらこの症状がなくなりました。 で、結局返品することにしました。

MSI RTX4070Ti SUPERで使用。 特にゲームプレイ等の負荷が無い状態でも、グラボのファンが突然高回転し、画面もブラックアウト。 白くて重厚感がありいい製品なのだが、残念ながら返品。