Storage Master Vacuum Storage Bag for Queen Full Size Mattress - Ideal for Memory Foam and Latex Up to 14 Inches - Designed for Easy Moving, Shipping and Storing with Straps (QUEEN/FULL)

It worked well for me. Here's some tips and info that I found helpful. I would say the bag walls are about 2 mils thick. Maybe 3? It's hard to say for sure and I'm not about to try and measure with calipers. That said, thickness is NOT the only measure of the durability of a vacuum bag. This didn't feel like it would readily rip or get a hole. If yours comes with a pinhole or a bad ziplock, I'm sure you can get a replacement free through Amazon. If you develop a hole during use, because of the vacuum nature of the bag, you can seal it with a couple pieces of clear packing tape in an X pattern. Don't use duct tape, because it will peel off over time. If you're worried about damage while you move or in storage, wrap it again in a tarp or drop cloth of a reasonable thickness. Mine did NOT come with metal D-rings on the strap. However, they were pretty heavy duty plastic, so I don't mind. However, I wish they were Velcro so that the excess would stay in place better. Compressing a full size memory foam mattress topper, I ended up with about two extra feet on each strap. It was enough to go around the roll again, but if it has been a little less it would have possibly caused one of the straps to catch during a move or something. You can also just twist the excess around the taught part of the strap, but that can come undone or bunch up. Not a huge issue. When vacuuming, make sure to position the memory foam so that it is directly under the vacuum port. This causes it to pull air through the whole mattress, getting it very compressed. I made that mistake the first time and had to redo the process, because the bag was sealing against the vacuum port and couldn't suck in any more air. Again, not a big deal. Oh, and remove any fitted sheet you have on the topper. It really blocked the air at the vacuum port more than I expected it to. I guess that should have been obvious. Whoops. You can roll the fitted sheet up with the vacuumed mattress afterwards, if you prefer, or put it with your other sheets. I recommend a shop vac for this. Most regular vacuum seal pumps won't be strong enough to fight the memory foam compression. If you don't have one, you should get one. But if that's not an option, just know that it won't compress as much. A shop vac is also strong enough that it will hold itself against the vacuum port, so if you don't have an extra person with you, you can still compress the mattress by yourself. I also recommend a piece of rigid PVC, at least 2 inches (ideally 3-4), that is slightly longer than the width of your mattress. That way, after you walk on the mattress for a bit, you can roll it along the mattress like a large rolling pin. It really helped to compress the pad about 25% more than walking alone. This part is also helpful with two people pushing on the PVC, but it's doable with one person. All in all, I would buy this again if I ever need another. I went from a mattress pad taking up a whole closet, to taking up a wide shelf. Obviously it would take up more space if it was a queen, and a full mattress instead of a pad, but the pad went from a headache to deal with, to something easily tucked away.

I still cannot believe how well this worked! Moving is a huge pain in the butt!! This bag was a bit of a challenge to wriggle a king size 14 inch depth mattress into, but it fit!! The zipper to close it was really rough to seal, my thumbs were sore by the time I was finished BUT that zipper type seal shockingly worked perfectly!! I wish it came with a better tool to save your hand digits the agony. It took about twenty minutes, maybe a half hour to get the mattress into the bag and the bag sealed properly. I had read previous reviews that you need a shop vac to vacuum seal it and they were correct. Even that took another good half hour to suck all the air out and make this fat mattress into a plastic wrapped pancake. But it worked and it worked well!! We were able to roll this beast of a mattress into a manageable sized log. Sooooo much easier to move down a twisted three story staircase. We threw it into the back of my compact car (my beloved best up Honda Fit) with ease. It fit through the narrowest front door and hallway ever in my new residence which is a 100 year old home. All while also being fully protected from the elements and dirt and dust bunnies. Highly recommend to anyone needing to move or store a mattress. It’s like a magic shrinking bag.

My partner and I purchased this item to help us with our move, since we have a California king bed that we got off of Amazon that is part memory foam, part spring. This this product is absolutely phenomenal since you can hook up a vacuum and leave it on for a while while you're pressing down on the mattress to squeeze out the air and compress the bed so that it's easy to roll up and move especially through small doorways if you have a larger bed. I felt like the compression was just right since it causes all the air to be sucked out via the vacuum I would say that you do have to press on the bed a little bit in order to get all the air out. I didn't really notice any odor with the bag which was nice. Overall I think it was very easy to use and did its function just right. I would say to anyone wanting to use this product to be very careful when carrying it so that it doesn't get punctured from sharp edges or if you're moving it down or upstairs you need to be careful with the hand railing if you have one because it can puncture the product and that will definitely make it a lot harder to move while it's reinflating. My partner found that out when it accidentally hit a hand railing when we were moving but we most recently bought another one and it wasn't punctured at all during our most recent move so we can reuse that when we move again.

What a lifesaver. My zipper was missing [just uses my fingers to close it and went over it several times] and the straps that come with it are useless [didnt stay tight]. I was prepared and brought ratchet straps. I used a regular 2 pc (not a stick or cordless) vacuum and it worked great. I probably could have shunk it more but I just needed it to fit in the backseat. The ratchet straps ended up ripping the bag while unloading so be sure to wrap a towel there if you want to reuse. This was a full size foam mattress. So easy to to use and then move around once it was shrunk down. Definitely worth the cost!

I just used this mattress moving/storage bag on my queen-sized foam topper and it was a game-changer. The heavy-duty plastic felt way tougher than I expected—no tears or punctures even when I was wrestling it through tight hallways. The oversized zip seal glided smoothly and stayed locked tight, so I didn’t have to worry about dust or moisture sneaking in during the move. Plus, the clear material let me confirm everything was seated properly before picking it up. Unloading was a breeze, too. Once I slid the bag off the mattress, I simply unzipped the top and everything popped right out clean and protected. The reusable design means I’ll be using this again for storage or future moves, and it’s so lightweight that even my partner could handle it solo. If you’re sick of flimsy covers that split after one trip, this is hands-down the real deal—strong, reliable, and exactly what you need for stress-free moving or long-term storage.