eSUN Carbon Fiber PLA Filament 1.75mm, Matte Texture 3D Printer Filament Carbon Fiber Reinforced PLA for Fast Printing, 1KG Spool (2.2 LBS) 3D Printing Filament for 3D Printers, Black

Great Filament. First time printing with a CF filament.After calibrating flow and PA, prints came out perfect.

Very good adhesion between layers a very strong material. I recommend this material if you want to make good strong parts slightly flexible on long runs.

Great filament

I know this has slightly less CF in it, but it prints so beautifully and easily i honestly couldn't ask for a better product...Except for the entire last row of filament being glued to the spool.

haven't used yet. but looks as advertised and I've always had good luck with esun pla plus, so I suspect this will be great too

The finish on this stuff is beautiful. If you go a little lower than standard layer height - say .15mm or so - the layers disappear.It is the easiest to print filament I have ever used: you can go fast because it doesn’t droop on overhangs, it hides ringing, and supports come off easily.If you want a stronger part, print it with fan only on overhangs. You will need longer layer times - about 15-20 seconds - but some models already have that. It will come out even stronger.Also, if you want to anneal PLA for heat resistance, this is the filament to do it with. It will have much less warping thanks to the carbon fiber. I have been annealing using a slow cooker. Put room temp water in it, and drop the parts directly in, turning it on LOW. It should take 2-3 hours to get up to 200f (94c). Unplug the slow cooker and let it cool to room temp gradually. With this method you now have super durable, heat resistant parts with less than 1% warping.This filament can do it all. Affordable and easy enough to print for daily widgets, and annealing turns it into a high performance plastic.

Forget about whether there are any mechanical advantages to carbon fiber PLA. It just looks fantastic, with a subtle sheen and texture that hides the layer lines.This stuff was easy to print and didn't require any changes to my default PLA settings.

I love this filament. It looks great, it prints great, it carves great.The "Red" is brown. You'd have to be pretty warped to call it red. I don't care if they add red pigment or whatever. It's brown. It's great, but it's brown. This is inarguable.