LIQUI MOLY Pro-Line Engine Flush | 500 ml | Oil additive | SKU: 2037

My 06 Altima (185k miles) had been burning massive amounts of oil (like 4 quarts every 800 miles) due to a leaking PCV valve hose that took forever for me to narrow down (months). So after getting that under control I figured I needed to decontaminate the poor engine. When using this I idled my car to operating temp (about 8 minutes). Poured the bottle in, idled it for another 15 minutes. Drained the oil (black and thick). Put the plug back in, poured about 2.5qts of new oil in. Idled it for 10 minutes. Drained that (black but much thinner). Took the old filter off. Let both areas drain for 10 minutes. Put the plug back in, put the new filter on and filled with the 4.6qts of new oil my car calls for. Ran for a few minutes (like 2 with a few revs) and then let sit for 10 mins before checking the level. When I checked my dipstick it was so clean I thought I had a leak because I couldn't see it on any of the crosshatch. I ended up having to go by touch to get the reading. This stuff is amazing.

I used it on a 2017 Nissan Pathfinder, and it did get "most" of the sludge out. Unfortunately, the engine was already gone. The stuff works!

So my 2005 Durango has a 5.7 and I put on 253,000 miles on it before it blew a head gasket. Since it was summer, iI decided I'd tackle it myself. The upper end was so full of gunk, I can't believe I hadn't had serious issues. Anyway, I apparently dropped some pieces of crud down the oil channels, 'cuz after putting it all back together, I got alarms for low oil pressure. Figuring I'd try anything else before replacing the oil pump, i gave this stuff a try. WOW!!!! Not only did the oil pressure return, the engine runs SO much smoother! I had forgotten how smooth it ran when it was new. The caveat is that apparently the gunk was the only thing keeping some areas from leaking - as it lost oil at a startling rate. 1 bottle of the Liqui Oil Saver though, and within a week the oil leaks completely stopped.

This is great stuff and work will more power to the engine

Bought a used 2020 Jeep Sahara 2 liter turbo charged with 80k miles from a dealership. Dealership had just changed oil the day of purchase. Drove it home 30 miles down interstate and another 20 back roads, it ticked and tapped allot at idle and the dip stick was varnished. I added the flush, let it idle for 10 minutes and drained it. The new oil from the dealership drained out jet black, no light could pass thru it. I changed the oil with Walmart oil and a cheap oil filter and let it idle for 5 minutes to clean out all the engine flush, it drained out clean and clear. I refilled it with Pennzoil Platinum High Mileage oil and a Fram Ultra Synthetic oil filter. It's been a week and the engine is noticeably quieter and smoother since using this product. If nothing else it cleaned allot of carbon from inside of my engine.

Excellent product. I use total synthetic oil and this product gave my engine an enema. Cleaned it out better than bran. I use it before all oil and filter changes.

I watched several videos by professionals who used this. Follow instructions. Make sure the engine is warm before you put it in. Make sure you have everything you need. The biggest tip I got that was repeatedly emphasized by the pros was to buy a “cheap” oil in addition to the new oil. After you run the flush drain the oil and flush. Put the cheap oil in and “rinse” the inside of the engine with the cheap oil. Then drain again. Replace the oil and filter with your good stuff. I followed these instructions or suggestions and…. I sat in the truck while the flush was running. It’s a 13 year old truck with 150,000 miles. It was running strong but burning oil and kind of loud. Sounded like it was growling. There were some ticking type noises that made me nervous. As I sat in the truck and let the flush cycle through the engine at idle I could literally hear the flush working. Very slowly it was like someone gave the engine a Xanax and you could hear it getting quieter and calming down. I drained, rinsed with cheap oil only letting the cheap oil run through at idle for another 15 minutes then drained again. The oil flush was clearly important. It didn’t come out as black as the first drain but it looked like old nasty oil. The truck is no longer burning oil. My gas mileage has increased significantly and it is running so quiet and smooth it’s unbelievable. I used a little less of the liquid Molly flush than it called for regarding the flush to oil ratio. I didn’t want to do something too intense to the inside of the engine. But the results were remarkable. Just as advertised after following the instructions. I also added the liquid Molly oil additive to the final oil change to ‘lube’ the inside of the engine. I plan to do another flush in about 10,000 miles. All that to say, yes, you won’t be disappointed as long as you follow instructions and a few tips and tricks. My truck is almost running like a brand new truck and again it’s an old and tired truck. I will use this as part of a high mileage maintenance and perform the flush every 50,000 miles or so. I feel confident it will extend the life of my engine based on the results

Liqui moly has been always a great product, I love it!