Universal 16 Row Oil Cooler Kit, 10AN Transmission Engine Cooler Kit —Stacked Plate universal racing aluminum engine transmission oil cooler — Engine British Radiator Oil Cooler Condenser （black）

it fine and fit work. no issue leaking. only thing you need buy little additional metal hose 90 degree and few other items that sell from same brand of this for hell prevents slip or jammed from belt and puller. all fine no problems at all ill keep update later

With the right adapters I was able to run this on my Sbc 305 plug and play like it was made for the motor working well as of now.

Awesome product so far

Cooler is nice and thick. Fin stack appears to be very dense. As long as this unit was put together properly it should function very well. All of the included fittings on the hoses look nice and solid. Comes with an attachment stack to add it to various engines. I may not end up using this for engine oil, but instead use it for the power steering fluid on a hydroboost brake conversion for a 5.7L GM V8. Everything came packed with adequate cushion to hopefully avoid any damage in shipping. A proper pressure test would be fun to see what it can hold and ensure all those welds are tight! It looks like a well put together unit and I hope the quality control is there inside and out.

The kit itself is functional, however would be greatly benefitted by the inclusion of a mounting kit for the radiator, and longer hoses. If your oil filter is towards the rear of your engine, you'll almost definitely need longer hoses, and AN-10 hose isn't exactly cheap. The radiator and hoses did come capped though, which was nice from a peace of mind standpoint. The oil filter attachment thing seems to also have spots for mounting oil temperature sensors, which is something you'd probably be interested in if you're installing one of these.

Perfecto

It's doesn't fit in my car plus I dont know 2hich car its will fit. It's look like completely waste of money

I purchased one and it was defective. TomGoo was good to work with and took back the old one. The kit is okay, the oil cooler holds oil. The 90 degree fittings aren’t the greatest to seal up, straights work fine. DO NOT use the fittings that go from your AN line to the sandwich plate, they have terrible quality control on that part. REMEMBER, if there is a mark that sits out at all on the fitting, it will not seat and will leak without a doubt. You get what you pay for. In the picture, I purchased 90 degree AN fittings, I now have changed them to be off the oil sandwich plate, with AC performance fittings. The oil sandwich plate fittings are - M16x1.5 - 10 AN so you don’t have to go through the hassle I did.

Está muy bueno el kit y vale la pena