Gorilla Epoxy Ultimate

This stuff is crazy good. Very effective. Easy to use. Once it does on, you will never get it off. It dries in 5 minutes. After you mix it, you only have 5 minutes to apply it or it will get hard and gum up. Once on, it seals well. I had to fix the cracks in my dashboard. I applied it and it sealed it. It filled in the cracks and now looks like one complete unit. I do not see anymore cracked lines. The black is a perfect match. This stuff is super strong. It definitely smells very bad but after 12 hours the smell is gone. I highly recommend this. It works. I always buy gorilla glue for everything.

The epoxy works wonders. It's black in color so it didn't look great on the clear acrylic that it was used on but it has held in cold temperatures and under pressure. It dried in minutes and cures over night. Kind of tricky getting it out of the tube but you can use the package as a tray to mix it. Very convenient.

I used this product to glue together parts of an artificial Christmas tree for a play. It survived being dragged on and off stage many times! Make sure to remove the piece between the bottles before squeezing - it is very hard to squeeze otherwise LOL

Used Gorilla Epoxy Ultimate to install new grilles on my truck and this stuff did not disappoint. The bond is insanely strong—dried rock solid and bonded the metal to the plastic perfectly. Once it set, there was zero movement and it feels like it’s part of the truck now. Super easy to work with, sets up quick, and gives you confidence it’s going to hold long term. If you need something heavy-duty that actually delivers, this is it. Highly recommend.

Worked well. Make sure that you are in a well-ventilated area. It is quite powerful.

Works great, hardens quickly, holds tight.

I used this for installing a black granite counter (the seams between pieces). It worked beautifully. It was the only black epoxy I could find and the final results are fantastic. The bond is rock hard and strong. It sets quickly - you really only have 10 minutes max before it's not workable. It goes on non-flowing so it would work well on vertical surfaces. Extremely easy to apply - just break the tab, squirt onto scrap material and mix with included applicator stick. The only thing I needed that wasn't in the package was a standard razor blade to press it in the seams and shave it off (which you should do before it completely sets). You would think it would be a nightmare to clear up but it cleans up amazingly well and quickly with acetone. Rubbing alcohol works too. Just apply it with a paper towel and it instantly starts to dissolve (turns bluish!) . I did this after about 10 min. I think it will be much harder or impossible to clean up like this if you wait much longer than 10 min. Because it's a two-part epoxy it stores well for continued application at a later time (no drying the tip shut like regular glue). As far as quantity, I needed about 2.5X as much as I originally thought, but that might just be my inexperience. I was not able to return the one leftover tube because it was "unreturnable". But since it stores well I now have a tube of great black epoxy if I need it!

I had an incident with our ATV where a branch got caught under the rear wheel and ended up poking out a small piece of the plastic fender right behind my leg. As a result, any time I went through water it would splash up against the back of my leg - because there was a hole where there shouldn't be a hole. I managed to find the piece of plastic that was broken and then ordered this epoxy thinking I might be able to fix it. I got the black color because that's the color of the fender on the ATV. Mixing is very simple as the syringe gives out measured amounts of the resin and hardener. I used the plastic packaging as a reservoir to mix the two together in, and the syringe comes with a little plastic mixing stick. I cleaned, and dried the broken part and existing fender, applied the epoxy and carefully fit the broken piece in place. I then covered it on the drivers facing side with a piece of duct tape - and then I let it sit overnight. And it worked! It's nearly impossible to tell where the break was and it has held up now for over 3 months. Gorilla glue is good stuff and this is a great product.

Husband loves this stuff.