Wago 221-413 Lever-Nuts 3 Conductor Compact Connectors 100 pk

If you are planning on doing a wiring project you need to have these in your kit. I first heard about these from Sparky Channel on YouTube and bought some to try them. I used them to wire outlets and lighting in the basement of my old apartment and when I rewired my entire garage outbuilding at my new house. I have used these extensively in place of wire nuts and will choose them every time. For working in shallow boxes, they are fantastic, for upgrading old-work, they rock. The fact they are reusable is just a perk. When managing a large number of wires in a box, using them beats trying to twist a big blob of wires together with linemans pliers inside of a small box. I have not had any issues with reliability and I have gone through several hundred of them. I cannot say enough good things about these, if you are looking for an easier, safer, and more versatile alternative to wire nuts to make your wiring projects easier... buy these. Also - I liked them so much I picked up a multi-pack kit of them for my Dad for Fathers Day 2018, this was the picture he sent me when he received them...

I used this when I was adding puck lights in my camper van. They are super easy to work with and safe. In the future, if I need to make changes, add lights, etc, this is a great system to have!

These are more expensive than using wire nuts, but they save a lot of time. I wired a whole house in the Philippines using only WAGOs. If you keep an eye on the proper depth of wire insertion as you use each Wago lever nut, you will never have a loose connection or a wire that pulls out. It is easy to change or modify the wiring for a room or a section of the house without damaging the wires. These come from Germany, my home country where almost every house and apartment has been wired that way for decades.

I just started using this type connector. Before, I had always used wire nuts. Compared to wire nuts, these are a joy to work with. If I get ahead of myself and make a connection prematurely, it's extremely easy to just open the connector, and start over. Plus, with heavier gage wires (like 12 gauge), I'd have to get out some kind of tool to twist the nut tight enough. No such difficulty with Wago lever nuts. One extremely handy use I discovered was that I can use these connectors to hook my volt meter lead to a wire, without having to look through my tool box for a clamp or vice grips. I occasionally need to hook my meter to a wire at a switch, then diagnose at the appliance (like a ceiling light), which of the wires in the junction box is the switched wire. Previously I would try to clip my meter's lead to the wire using alligator clips (too weak -- usually just came apart), or vice grips (too strong and too heavy -- would bend my meter's lead). With these, I can snap them together in a second, then unsnap them when I have my answer.

I discovered wagos, when another technician was using them on a lighting ballast. The flexibility of using a wago instead of a wire nut is awesome. There are some concerns I've heard from field techs about longevity of these but I personally have now used a few hundred of them and have had no issues. making sure the wire is stripped back appropriately is the biggest thing. But the connector holds tight and works well. It's also very useful for troubleshooting purposes when you are jumping out different components. You can use the wago and connect easily without as much fear of shorting out a circuit. Overall Wagos are a must have in my electrical work bag

The product is beyond great - I don't know how I ever lived without these things for use in electrical junction boxes. No severe pain from twisting multiple wires in a wire cap (I have carpal tunnel), they have two test ports for a probe, and you can apply them to form circuits literally as fast as you can strip the wires in a junction box. These are just better in every single way than even the push connectors made by Wago or Ideal. You can use them with wire sizes ranging from #20 down to #12, with both solid and stranded wire. They also sell a higher amperage version (221-613) rated at 30 amps that supports #10 wire. The only downside is cost, as these are obviously significantly more expensive than bulk standard wire caps. However, the expense is quickly made up with the reduced labor in installing them - as far as I am concerned, this offsets the extra expense. Plus, you never have to worry about a bad connection or broken wire resulting from a badly twisted wire cap.

Make electric so much quicker. Only thing is after snapped down the lever has a little play and lift to it. But it's still clamped on wires. They are great and I won't go back to nuts.

These connectors are so much easier and faster to use than wire nuts. I installed almost 100 overhead LED flush mount ceiling lights in my basement with these. Each one required a small module above the finish ceiling. Those modules are very small and there is not a lot of room for lots of wire and wire nuts. They also required a lot of working over my head with my arms up high. These connectors made fast work of the job and my hands were not sore at all, like they would’ve been if I had to put 300 wire nuts on. They are surprisingly sturdy, and you cannot pull the wires back out by accident. They worked with both 14 gauge and 12 gauge Romax, as well as the smaller gauge flexible wires that were connected to the modules.

Gewohnt sehr gute Qualität und sehr praktisch.

Excellent seller. Fast delivery and perfect product

Só vieram 10 conectores, e no anuncio dizia pacote de 100. Vai entender...

I've always been one to do Electrical work easily and these connectors make my job easy.

Even better than the old version (which was really good already) in every way. I find it to be easier to insert and lock the wires in place