Zinus Judy Upholstered Platform Bed Frame, Mattress Foundation, Wood Slat Support, No Box Spring Needed, Easy Assembly, Queen

I'm pretty impressed with this product over all, it does the job of holding a mattress perfectly well, it's pretty solid, and it looks pretty nice. It isn't mind blowing high quality, but it is pretty much everything I expected from a $250 piece of furniture. Here is what to expect when you purchase this product (and if you like the way it looks, I say go for it): It comes in a enormous box (which UPS decided to leave in my back yard next to my trash cans). Inside, the headboard is wrapped in a big plastic bag. All of the parts, including the directions and hardware, are packed inside the headboard in the zipper compartment. If you don't have a very big space to work in, I recommend doing what I did - cut open the box outside, (it's actually double-boxed) taking care not to cut too deeply, and remove the headboard. Carry that inside to wherever you are going to set it up. Leave the box outside, it's huge and serves no purpose going forward. Warning: it's very heavy. This is a two person lift for sure, though if you had to you could remove the parts from inside and carry them in multiple trips (the empty headboard is bulky but not too heavy). Make sure you have a large enough space to assemble before you start unpacking, you will need to stack the parts out of the way so you can position the frame. Assembly is really strait forward, there is a small hardware kit with five screws, a set of spare parts, a hex wrench, and a hex ratchet (which is a life saver, tightening screws with a ratchet is so very much easier than a normal hex wrench). There is a single (two sided) large page of instructions. There isn't much text, but you don't really need it, the pictures are all you need. All the other screws needed are already threaded into holes on all the parts - you never need to remove those screws either, just loosen them so that the parts slide together, then tighten them down. The five screws in the part kit are for the frame. You will find two large metal pieces, they are the two parts of the frame. They come folded up, all you have to do is unfold them and their legs, and place the shorter one across the center of the longer one (there is a slot for this) creating an elongated plus sign shape. The longer part of the frame runs along the center of the bed length-wise. The five screws are inserted into holes on the top of the frame above the legs, one screw on each arm of the frame, and one in the center where they cross. Those screws main purpose is to prevent the frame from folding. The frame pieces themselves are very solid, and don't require any additional assembly. There is a box containing the for wooden legs, they have screws sticking out the top that thread into the bottom of the baseboard and headboard. Once those are attached, you need to loosen all the screws all all the remaining parts - the headboard, foot board, and four side panels. Back them out a quarter to half an inch. Then you position the head and foot boards, and slide the ends of the long portion of frame over the screws in the middle of those parts. At this point you can tighten those screws a bit, not actually tight, but enough to keep anything from shifting around. Then you slide all the side pieces on and finally tighten everything down. This is where that ratchet comes into play, it makes getting everything snug so much easier than it would be without it. The cross slats are all attached together in rolls, you just stick the first one to the Velcro, and pull each one tight and the Velcro strips space them perfectly. Toss your mattress on top, and you're done. I should note that the edges of the bed don't extend up past the slats, so the mattress isn't down in the box at all. I kinda prefer beds where it is, so it's prevented from sliding, but it isn't a big deal. Everything feels nice and solid, no creaking or wobbling or anything. I'm pretty happy so far, the only real gripes are that the padding on the headboard isn't especially thick - but it's enough to be more comfortable than wood, or a wall - and the fabric isn't especially soft. I'm also not a fan of the brown stained wood legs, I would have preferred them be painted black I think it would have fit better. Bottom line, I like it. If you're looking for a platform bed in this price range and like the look of this one, I recommend it. Edit: 4 Years later I still really like it. It's solid, I haven't ever needed to tighten anything, and there are still no creaking noises or anything. In the time I've had it, I switched from a traditional spring mattress to a foam one - no problem, this frame supports it just great. My only complaint at all, is that the mattress can slide a little if you move a lot in your sleep. It's not a big problem, we're talking an inch or so in a week, and you can shift it back no problem. But if the sides just extended up an inch past the slats to prevent the mattress from being able to move at all, it would be the perfect bed.

This bed is a fantastic value and a true feat of engineering. Upon delivery you have a box the size of the headboard and its a lot of metal inside, it's heavy so beware. Once you open the box, you find they have neatly been able to put every component inside the headboard itself and have a zipper closure. This will be a fantastic bonus if you move, it's always a pain to keep everything together and organized. The headboard looks as good in person as the stock photos, nice deep gray fabric with a little padding. Now onto the good stuff, you get an all metal frame with supports in all the right places and STURDY wooden slats which have a velcro system to hold them perfectly in place. Unlike some cheap furniture, there is a metal support bar down the middle, so sagging is no worry even with a foam mattress right on the slats. Assembly is super fast and easy due to the fantastic little ratchet included in the box, it goes in both directions at the swith of a lever, making it perhaps the easiest bed assembly I have ever done. The slats fit in the frame perfectly and velcro right in place, they only cover half the frame per set so you don't have to wrestle with 7 feet of flopping boards on a string like most makers. This bed is in our guest room, but I will be buying another bed from Zinus for our kid's room and when we replace our bedroom set, I will be looking to them over places like Ashley Furniture, the build quality is far superior and a fraction of the cost. I am very impressed with the value you get here, it's truly an exceptional product, I would have expected to pay considerably more for something of this fit and finish. We had two adults sleeping on the bed the very first night we had it, very solid, no creeks or squeaks and most importantly no sinking of the memory foam mattress so you do not need the box spring at all.

The Zinus Judy Upholstered Bed Frame is an excellent addition to any bedroom. Assembling it was a breeze; all parts were well-labeled, and the instructions were clear and easy to follow. It took me less than an hour to put it together on my own. The quality of this bed frame is impressive. The materials feel sturdy and durable, providing solid support for the mattress without any creaking or wobbling. The upholstered headboard adds a touch of elegance and comfort, making it a cozy spot to lean against while reading or watching TV. One of the standout features is that there was no chemical odor, often a concern with new furniture. This was a relief and made the bed usable immediately after assembly. Considering the quality and ease of assembly, the price point is very reasonable. It offers great value without compromising on sturdiness or aesthetics. If you're looking for a stylish, robust, and affordable bed frame, the Zinus Judy Upholstered Bed Frame is a fantastic choice.

I was redoing my guest room and looking for something that looked good, but relatively inexpensive. This bed is 5 stars on both counts and is even better than I had hoped. As others have stated, the box is heavy!! I tried moving it from my porch inside by myself (don’t do that, it is too heavy even if you can!). Guys were coming to have my carpets cleaned and they graciously moved it into the foyer for me, but if you don’t have help just open the box where they dropped it off and individually move the items. I was surprised how easy it was to put together and I’m not one who is inclined to put things together myself. I didn’t time it, but I’d guess 20-40 minutes total time. One thing to note is that when you connect the frame with the head and footboard the bolts you need are already in the head and footboard. Don’t open the side of the bolt package that reads “Spare Parts”! They’re extras, which unfortunately, I didn’t clue in to that fact even though it clearly states spare parts and I spent a good 3-4 minutes trying to figure out how to get the extra bolt in. 😂 All the tools you need to put it together are included. I’m storing plastic boxes under the bed. The sideboards are too low to slide them in, but I was easily able to lift the bed an inch or two and slide them in and they fit perfectly once they cleared the footboard. On the downside 3 of the 4 legs had minor blemishes, one was noticeably scratched, but I just screwed them in so they were hidden, not that anyone would notice anyway. It feels super sturdy. Overall I’m very pleased with this bed and will consider the brand when I’m ready to replace my own bed.

We’re liking this frame so far, but I’ll come back and edit my review in a few months once we’ve really tested it out. The whole thing was pretty easy to put together, my husband and I were able to do it in less than an hour. All of the screws and pieces were clearly labeled and separated, which was nice. We only had one issue, where one of the holes wasn’t quite lined up, so we had to rip the lining to make our own hole (photo 2). Other than that everything fit together nicely, and the ratchet tool that they give you is very handy. Photo three is the completed frame with an IKEA Haugsvär mattress. There’s still plenty of headboard left to be able to sit back on comfortably. I was worried the fabric would be scratchy, but it’s not at all!

I spent several months researching different headboards and platform bed frames and this one caught my eye and I kept coming back to it. I finally broke down and ordered it! It arrived quickly and the large box was still in good shape when it got here. My mom and I struggled to get the box to the basement (where my bedroom is) as the loaded box weights close to 100 lbs and is awkward. But once I got the box open, everything was as easy as it could be! It actually took me longer to move my mattress and tear down my smart base, than it actually did to assemble this bed (by myself). All of the main bolts are already where they need to be; you only have to loosen them a bit and drop the brackets right in place and tighten down. I wish all furniture was this easy to assemble! I am shocked at how sturdy this bed is! I got in the middle of my mattress and bounced around, to my surprise, there was not a squeak from the frame! Best of all, thanks to the back of the headboard being hallow, I can push the bed all the way up against the wall! I highly recommend this to anyone who wants a good looking and sturdy bed, that is easy to assemble and super affordable!

The ZINUS Judy Upholstered Platform Bed Frame is a solid choice if you want something simple, affordable, and good-looking. Assembly was surprisingly easy — all the parts were neatly packed inside the headboard, and it only took about 30 minutes with basic tools. Once built, the frame feels sturdy and doesn’t creak or wobble. The grey upholstery has a clean, modern look that can match a lot of bedroom styles. The wood slat support is strong enough that you truly don’t need a box spring. My only minor gripe is that the slats are secured with velcro, so they can shift a little when moving the bed. Still, for the price, it’s a great buy that looks much more expensive than it is.

I'm very happy with this bed. It was very easy to put together, one of the easiest products I think I've ever assembled myself. I did have my son (15) help me put it together, as I was attempting to have him learn how to read instructions, so it took slightly longer than it would have. I think it can be done alone in under 45 min. Bed came in great condition and with all pieces. We carried it piece by piece to his room to assemble it, as it was a heavy in box. It seems very sturdy, although I'm not sleeping in it, so I've no idea if it would squeak with a lot of movement, only reason I didn't give a 5 star to noise section. The mattress seems to stay in place so far. Headboard design pattern is nicer than I thought it would be. I didn't pay much attention to space under the bed, but I'm sure you can fit small items under it. I would defiantly consider purchasing another zinus bed if ever needed. Also, only thing I noticed while putting bed together is the 2 side bars, I could not over tighten 1 on each side, as 1 would raise higher than the other. But still seems fine. I just put all instructions, tools, and extra screws in zipper part of headbard so they are there if and when needed. We've only had this bed about a month, but seems fine as of now.

I've ordered a few different pieces of cheapo furniture off Amazon in the past and it's always a bit of a risk doing it without seeing it first. This platform bedframe genuinely surprised me though. It was very well packaged and came in perfect condition. I got the queen size, and the box is pretty heavy. You can absolutely build it by yourself, but moving it would be easier with some help. Everything was packaged neatly and securely inside the headboard. Full assembly was remarkably simple, taking a little over half an hour on my own. Should be fairly easy to disassemble and reassemble as well, which is useful if you move a lot. I used the supplied allen key to connect everything keeping it somewhat loose until everything was connected, and then used the supplied ratcheting wrench (very useful, I wish all prefabricated furniture came with one) to tighten everything up. It feels VERY solid, no loose wiggles or squeaks anywhere. I was worried the headboard would say if you rested your back against it since it's mostly hollow, and am happy to report that it offers plenty of support, no issues there. Only bit of confusion was not realizing that several of the screws are already screwed into the headboard, sideboards and footboard. You just need to loosen them to allow the frame to hook around them and then tighten them back up. Initially I thought that I was missing a pack of screws, but had I taken the sideboards out of the packaging and inspected them I would have noiced. The supplied paper instructions are a little vague, but honestly assembly is simple enough that they get the job done. There is a QR Code to scan with your phone if you would prefer watching video instructions instead. All in all, easily 5 stars. It feels very solid, no squeaks or rattles, came in perfect condition, and after putting it together in just over half an hour by myself, I'm confident in that I could do it again in half the time, no instructions needed. Very simple and sturdy.

I found nothing to dislike about this bed frame. Assembly instructions easy to follow - done quite quickly. Went with the no-box spring anymore mode. The mattress sat comfortably on the slats. Our old all metal frame was quite noisy/squeaky - this is totally silent (!!) with respect to motion. It might be my imagination but I felt better support with this bed frame than our previous. Looks quite sharp too - not large and overbearing. Definitely recommend it on all levels

When Purolator dropped this off on my driveway, I thought they forgot part of it. One large box, the size of the headboard..."where are the side rails?"....I wondered. When I opened the box, I noticed that the back of the headboard had a zippered access panel that opened up to reveal all the components and hardware. Great design! We decided to remove everything from the back of the headboard and bring it into the house piece by piece in order to make it all lighter to carry. I have to say that this was one of the easiest pieces of furniture I've ever had to assemble. Probably took about 30 minutes. It took me longer to disassemble the Ikea bed that was previously set up in this room. Anyway, we are extremely pleased with this bedframe as it appears to be very sturdy and it looks good.

i purchased this bed frame in a king size in 2021, has held up through 8 different moves and still going strong.

So happy with this bed! It was so easy to build; I had help and we finished it in less than an hour. It would have taken a little longer on my own, but I definitely could have managed. The tool that is included is awesome and I’m totally keeping it for future furniture builds! The bed feels really sturdy and it looks great. The *only* complaint I have is that the head board is quite short... As you can see from the photo, my pillows almost cover it entirely, so you don’t get to see much of the geometric design.