JIUSHARK JF13K Diamond,Top-Down CPU Air Cooler,6mm x 7 Copper Heat Pipes 2×120 * 120 * 15mm PWM&ARGB Fans 250W TDP SuitableFor Intel LGA 1700/1200/115X AMD AM5/AM4

Ok... Minor issue time, of 7 of these total ordered and installed 1 had a screw post break and one had a screw post bend. Same torque on all of the coolers, same tools, the cooler itself is fantastic and almost on par with a 280mm aio if you have proper air flow. Fitting snug in both atx and itx builds. Installation is incredibly straight forward, mounting is a little rough but on par with thermalright, and frankly the cooler looks cool and premium in general compared to standard tower coolers. noise level is a mixed bag, some units seem to come with a fan that has a very slight wobble that is audible straight off but generally within expectations for a dual fan tower if slightly quieter on lower speeds.

I have been using this cooler for over a year, and I have no problems with it. I have in a micro ATX Thermaltake Tower 300. While it does take up a lot of space, I really like the look of it, It makes my PC stand out from all of the AIO and regular air-cooled PCs. It keeps my 5800x at 38C while idle and in the longest of gaming sessions it never goes above 75C. I have also swapped the fans out to give a better look from the cheap fans that are included. Overall, I would recommend this cooler.

It works, it keeps my intel i7 265k at 37° on idle with no problems and for the price is just a good deal. Do pay attention to the size as I had to remove the back fan from my case because it wouldn't fit otherwise. if you want the back fan on your case do get the smallest fan you can find.

Works well with my i5 14600k. No overheating problems either which surprised me with the design

What I don't think most people know about this cooler is that it can also be mounted vertically if you have the right motherboard to do it. It also has standard 120mm fans which can be changed out for any other 120mm fan you want to make it perform even better and have different color combinations.

I used this with an MSI MPG Z690 FORCE WIFI Motherboard. While my case is huge I can see how this cooler would be a great choice for a small form factor/ITX build.

The case I'm using is fairly decent for a small form factor as it has 6 case fans (properly set up) but the CPU cooler can't prevent thermal throttling on a 14600k I have to limit the cpu to a max of 125 watts or it hits 100c. I also tried multiple mounting attempts and also using a contact frame to ensure proper mounting and no issue with the install works perfectly with a larger cooler unfortunately the case only allows 135mm height cooler so this was one of the only options that has 2 fans and didn't have the money to buy multiple coolers. After seeing a review from GamersNexus I bought this and I regret it as it was not as good as they had said.

Great little cooler. A bit of a hassle to install, but looks great once in place. I ended up swapping out the fans so that the thickness of the cooler lined up with the vertically mounted GPU. The included fans were otherwise great and I've used them elsewhere. I feel this cooler would perform even better if my case had mesh panel, but then the look would not be as great haha.