Retractable Hard Tonneau Cover Fits 2014-2025 Toyota Tundra 5.5-5.6 FT Truck Bed w/Deck Rail System

The media could not be loaded. 5 stars - we absolutely love this truck bed cover - it is completely waterproof and of very high quality, durable material! It is retractable so it rolls up and stays out of the way with no impact on visibility from the rear view mirror of truck. It is easy to operate and has a lock to keep personal items stored and safe.Very impressed with quality of product and once installed properly, it operates with ease!Would highly recommend this product, similar local truck supply stores have a similar product for 2 times the amount - valuable product for a low cost.

If you have shopped around - you know that retractable covers typically run between $1000 and $2500 dollars. This one is much less expensive. The aluminum manufacture is stout and the machined tolerances are very fine. It is water tight, easy to roll open and closed, lockable and sits very nicely on the side rails without sticking up. Only caution I offer is that it really takes two people to do the installation. I had to resort to watching the video several times to help clarify the directions - but that's no big deal!

As a title says I've only had this a month I drove from South Carolina to Florida to the beach packed all my stuff in it used it for vacation. It kept all my stuff dry that being said I did not use the hoses that came with it because they were cheap I went to the auto parts store and bought different hose for the water to drain out of the truck when it rains. Installation was a bit slow due to not very good instructions. Searched videos to get better insight. After installing how I assumed it had to be I then had to take it apart to take one piece out for it to fit because the tailgate would not close with that piece in next to the cab. The lock and the key that comes with it I'm not sure it's purpose. I guess if your tailgate doesn't lock then it would be nice to have but I can't figure out how to unlock it and lock it with the key. I do not use the key. I lock and unlock my tailgate and lower my tailgate and then manually unlock it after the tailgate is open. Which works really good for me but if you don't have a locking tailgate I guess it wouldn't matter if you had a lock on the retractable top at all. Now that I'm done critiquing it. It looks really nice on the truck. Actually one more critique the retractable top right where it goes in to go down into the coil there's two little rubber pads that are glued to part of the frame those rubber pads are to protect it from getting scratched as it's rolling in but it may over time rub the finish off the top of the cover where it's rolling back and forth. Needs redesigned so that they don't even have to use a rubber pad just cut the frame back far enough that it's not a concern. Did a lot of shopping around for the money I'd still choose this one over the other ones.

Once installed it's very good but instructions were really bad. They have a video on YouTube which is a bit easier to understand.

I just installed this today on my 2025 tundra 1794 and it was extremely hard to install. The instructions and the videos need to go into way more detail and if you are going to install this and dont have atleast 4 hours to waste have someone give you a hand because it’s really hard to do by yourself. It is also hard to open and close it does not goes smooth like it does in the video other than that it seem like good quality all the parts i received worked and now that its on it actually looks good.

At first it looked good quality however aftwr driving in thw city (not even off road) it opens by it self.

The cover was slightly damaged through shipping, not from a lack of packing as it was packed very well. It is heavy so I am sure one or two of the shippers were not so gentle with it. Nonetheless, sellers were quick to ship out a new handle assembly as that is what was damaged.If you have side rails/tracks like my Tundra did then you have the choice of either removing the T-rails or installing the cover per the supplied supplemental instructions. Using the factory Toyota installed T-rail is a bit tricky as the supplied aluminum clamps don't work so great with it. But I figured out a solution by trial and error: Don't put the rectangular cushions on top of the aluminum bracket (as instructed by the directions) and the lower C of the supplied aluminum bracket will sit on the bottom lip of the T-track. Works perfect.I did not want to drill the bed of my new truck to install the drain tubes, so I figured out a different solution: The front drain tubes (trim to fit) are aligned with a factory drain hole and stay in place with a little strip of Gorilla Tape. The rear drain pipes (trim to fit) hang down and curve towards the tailgate. There is a gap between the bed lining and the side wall of bed where the tailgate latches, the drain tubes sit in that little gap pointing towards the tail gate. The water drains fine at all four points. If they move then I will give them the Gorilla Tape treatment as well.I did not find the cover difficult to assemble. Assembly would have been easier with a helper but I managed. It also helps that this is not the first aluminum retractable cover that I have installed on a truck. in either case, it goes together pretty easily.I would buy this product again as the seller definitely stands behind their product.

The media could not be loaded. Looks great! Easy to install. Great product for the price.