16 Pack L Brackets Corner Brace,Heavy Duty Small Brackets,Stainless Steel Right Angle Brackets, 90 Degree Bracket for Wood Shelves Dressers Chairs with 64PCS Screws(1.58 x 1.58 inch), Silver

This 16-pack of 90-degree L brackets are stainless steel that come with a thin white film to protect the two inner sides when removed leaves a nice finish. The outside edges do not have this nice finish on them, nor do they have the film on them but that is not a problem as they will be hidden after install. The back edges are a little rough as still have the manufacturing burr on them but can easily be removed if needed. I would not say these are necessarily heavy duty, but they are sturdy and just as good as any of this size as I have gotten in the past from any big box store. In fact, the finish on the two inside sides as mentioned is actually better than you normally get in L brackets. The included screws are probably good for a thinner shelf on the top, but I would use longer screws, if possible, to give more support and strength in holding the bracket. Overall, these stainless-steel brackets and screws are a decent value for the quantity and finish under the film.

I am using these outside to hold some 4x4 treated blocks in place. The stainless is going to be great for weather resistance and also resistance to the chemicals in the treated wood. I would not really use these for shelf brackets as they are pretty small. But, for corner brackets, they work great.The face that typically shows is coated with a thin protective film that easily comes off with a finger nail leaving a very nice surface. The backside of the bracket has a pretty pronounced and sharp burr on the entire edge. This leaves the part feeling a bit unfinished. I don't ever recall buying L brackets that had such a pronounced burr on the edge. In my case, the burr is not relevant for my use. But, others may want to file it off before use.Reasonable number of brackets and included screws for the money. Recommended with the caveat on the burrs.

These brackets are meant for medium to lightweight support. I expected this based on the dimensions in the ad. They are stamped, not laser cut and as a result there is a significant burr on the back side. This is not really a problem as you will not notice it once they are installed. However it would leave a serious mark on a painted surface if you wanted to remove them. The front side comes with a protective layer of very thin material which you can scrape off with your fingernail. Underneath is a very nice polished surface that presents a nice appearance once installed. The mounting holes are chamfered so the screws sit flat with the surface. Standard wood screws of the correct size are included and the heads are shiny to match the polished surface of the brackets which is a nice touch. I would recommend and purchase these brackets for a lighter weight shelf or for corners that needed extra support. 1 star was deducted only for the burrs on the back side which may or may not be a problem for your project.

These are small 1 9/16” corner brace angles. The angle and provided wood screws are both stainless steel. That are sturdily made. One reviewer commented that their pieces were not 90degrees. My 16 pieces are a true 90. There is a minor stamping burr left on some pieces. For my use connecting parts of a temporary plywood cabin this isn’t an issue. But is the reason for 4 stars. At just under $5 for 16 pieces this is an excellent bargain for all stainless steel. I will order more.

They are not as shiny as pictured. One side is dull, and the other one is polished, but protected by a film that you can remove if you choose to do so. I like that this is a countersunk brackets perfect for my solar panel installation.

Cost is the only upside to these. They are very flimsy and not at all “heavy duty” as advertised. But they will work for my needs for now

Item description: 304 SST L-brackets and screwsBrand: NinogeItem: B0BZZV5DH6Date received: 2023-06-02Headline - Good value on small stainless steel L-brackets and screwsProduct Claims16 Ct 4-screw stainless steel 1.58 inch L-brackets304 stainless steelI received exactly what was claimed in the product description as to quantity (16 count), material (stainless), size (1.58 inch nominal size), with 64 ct cross-slot countersunk head wood screws.The units arrived in a heat-sealed plastic bag, within which they were in a zippered plastic bag. The brackets come with a protective plastic film on the inside of the L, and appear to be manufactured by a stamping process that has left a slight burr on the reverse side (be aware for both handling safety as well as a possible need to remove the burr to prevent scratching). The 4 holes in each bracket (2 each leg) are countersunk; the bracket thickness is 0.066 inch and the width is 0.629 inch.I can't assess the product claim that these are specifically 304 alloy stainless steel, but they are only mildly magnetic, as would be normal for most moderately cold-worked stainless steel alloys. (Carbon steel would be much more strongly magnetic.)Why stainless? - stainless hardware is not necessarily the highest strength material you can find (carbon steel is normally stronger), but it are normally strong enough for most uses, and it will not corrode (much, some mild surface corrosion is possible). They provide a great broad-based solution for small shops.

L Brackets are often a carpenter's best friend and these L brackets are very good ones. I often use them to make something stronger or fix something broken. I needed a stand for dog and cat food and much more storage in my pantry. I bought the cheapest chip board bookcase I could find and reinforced it with these angle brackets. My large glass cannisters weight 15 lbs each when filled with pet food. With extra angle bracket support, I now have stable, inexpensive storage and easy pet food access for many years to come. I also used one to repair a loose leg on a living room chair. A package of L Brackets (and mending strips) should be in everyone's tool chest.