Easylife TV Wire Hider Wall Mounted 16 Feet Brown Cord Cover Kit for Wall Paintable Cable Raceway Adhesive Wire Concealer Wall Cable Management System

RECOMMENDATION: We rate this conduit a ‘BUY’. Installs easily, looks good when mounted on medium-stain wood, and can handle multiple cables at one time. THE GOOD: 1. Looks good and does not stand out when mounted to medium-stain wood. This is what we purchased it for and works well in that capacity. See video. 2. Includes connectors that pretty much cover all possible situations. Just be aware that you do have to custom cut these using something like a box knife, so you may not feel comfortable doing that. And be sure to take all precautions when doing that. Using a ‘cutting glove’ is recommended – these are readily available on Amazon by searching otn he above term. 3. Easy to install. An adhesive foam backing is pre-installed on all conduits, and the top of the conduit comes completely off to install cables. And, it is easy to re-attach the top when you have the cable in the conduit. 4. Can handle multiple cables at one time. This will depend upon the thickness of the cable of course, but I have been getting about 3 CAT5-type cables into a single conduit. THE BAD: 1. The adhesive on the foam backing is not the strongest, so you may need to augment this with some double-sided tape. 2. The connectors clip on, but can be pretty loose in various situations, so you may want to apply some double-sided tape in this situation as well.

As with this type of product, you are concerned about the adhesion and the closure of the pieces since there is some degree of pressure on it, but so far it has worked perfectly! They look a little cheap in the package, but once installed they look so much better. The straight pieces were effortless but attaching the corners...not that easy, but look good once installed. I did learn a few things that even though are a bit of a pain, I honestly don't know if it was me or the product design, but it was certainly not deserving of a lowered rating. 1. When cutting the pieces, the use of a vice works best. Trying to hang it off a table edge and cutting...not so easy or clean cut. 2. Attach the angle covers to the straight ones before sticking to the wall. 3. These are not quite as wide as I thought and had to buy the bigger ones for some parts of the application. The small ones will fit speaker wire, coaxial cables and a regular extension cord. Get the larger one for an appliance cord/appliance extension cord. 4. The backing and the tape separate very easy in some spots and in some, the backing comes off easy, leaving the adhesive stuck to the next layer. Watch for this when unrolling the adhesive. 5. The adhesive works really good! Make your placement slow and carefully. Adhesive came off a wood vanity and painted wall with no damage or residue, but really couldn't reuse the adhesive.

It was easy to put up. I put it on a wood beam and the adhesive was a little more inconsistent, easy to pull off sometimes, other times very difficult. I used a few small screws on inside to hold it up. Blends in well with the wood beam, although it looks more brown colored than wood like. I would use it again, much better than wires hanging all over.

This kit is ideal to cover a tv cable cord. There was one ugly tan continuous one running from outside through an exterior closet and into my bedroom, and along a wall. After replacing flooring and baseboards, it was very noticeable. I didn't want to chance splicing the cable at the wall outlet to attach a new one inside, and didn't want to pay the cable company $150 to do it, so I took a chance that this kit might solve my unsiqhtly dilemma. It arrived today and I am impressed that it took only five minutes to peel and stick the four back pieces to the wall, insert the cable, and slide the covers over. They lined up so well that I decided not to go to the trouble of using a box cutter to adapt three of the generic joiner pieces for use as couplers. Unless you are on the floor right next to it, the seams are not visible. I adhered the covers to a textured wall directly above the top of the baseboard, which aligned them up perfectly. Be sure of your placement because once they are adhered, they aren't going to move without a lot of effort. Very happy I gave this a try. I am ordering another kit to do a wall in another room.

After installing track lights I had exposed wires running between the open beams. The color of the raceway was a perfect match for my application on my natural wood ceiling. This makes it very difficult to see the raceway in the photo! Buy its there! I was skeptical about the adhesive but so far it is holding quite securely. If it come loose in the future I'll add two or three short screws on the inside of raceway. The cover snaps on easily and stays put. I needed to trim the length to fit. This was easy to do. I used a plier pipe cutter made for small diameter PVC pipe. Beautiful cut and square

I was able to work around the bent parts some, but sucks they were bent real bad.

These hide my cables very well. Matched my wood walls so cables stay well hidden. Easy to trim to size and install.

I was installing 3 POE cameras on the outside of my house and the only way to get CAT5 from the wiring closet to the front and back of the house was via the garage. I ran the cables from the closet up through the attic and down into the garage ceiling where a placed a Legrand surface mount box. I then ran the 3 cables through the cable raceway to the side wall where I split the runs - 1 to the front and 2 to the back. In both cases I ran the cables through more raceway until I reached the egress points where I terminated the cables with RJ45's and plugged them into wall plates with keystones. Installing the cable raceway was easy and for added security, especially the ceiling run, I predrilled 3/16" holes every 18" and used #6 drywall screws to secure it to the joist. The center line inscribed along the bottom of the U channel made centering the holes easy! Rather then use the universal covers I just staggered the top cover by 2" away from the U channel joints - adds rigidity and looks good. I also didn't bother using the covers for corners and just allowed the cables to be exposed at each turn - see attached pics.

Self adhesive tape is already on the concealer, you just have to peel and install. Sticks well to wood, haven’t tried wall/paint yet. The small hinges do require a saw if you need them though. All-in-all, good value for money and time, will buy again.

Ne colle pas bien sur tous supports et la coultbois clair est plutôt foncée.

El adhesivo se despega un poco, deberia ser mas resistente. Por lo demas muy faciles de cortar y colocar

FACIL DE INSTALAR

MALISIMA CALIDAD DE LA TIRA ADHESIVA, SE DESCUELGA RAPIDAMENTE HASTA DE LA CANALETA. NO PARECE UN PRODUCTO FAMATEL. ¿ES CHINO?