24 x 36 x 0.12 Inch Acrylic See-Through Mirror, Scratch Resistant, 40% Transparent

This arrived in a giant box! I was so worried it was going to be broken, but it was very very bubble wrapped inside. It arrived in perfect condition. I made a huge magic mirror for a class project, and it worked out great! It's thick, but yes, you can see through it. I really enjoyed working on this project! Ended up getting a B in the class (aww ysss)! And yes, I know it's expensive. Trust me I did quite a bit of looking around and almost bought something cheap. But I think if you're going to make something for your house that you intend to use daily, or for a gift, spend the money on a quality peice of acrylic. The company even reached out to me to make sure everything was ok when it arrived. Spend the money, it's seriously worth it! Warning!! I suggest working with something a bit smaller though if you don't have the right kind of frame (like me). It tends to bow out, like it's falling out of the frame, but when I have time I plan on fixing the frame so it stays in place. Make sure you have your measurements right!! I'd suggest working with a local framing company if you'd like to put this in a shadow box type of fixture.

Well the first one came broken. But i contacted the seller, and they had a beautiful replacement to me in two days!! I couldnt be happier with the final product!! Im limited on space, and my vanity doubles as my desk. Im currently getting my associates in software engineering. And my surface pro took a hard fall from the mounting arm I had, I needed to reevealuate. But i needed something better than just a raspberry system. This ultimate smart mirror was a perfect solution. I unbezeled a hp EliteDisplay S230tm. And got a mini hp EliteDesk. A shadow box that was 3inches deep, and this piece of acrylic. Its been a headache, but its so worth it!!

UPDATE: got a replacement, and it's just as bad, if not worse. If you're using it for a magic mirror project, just bite the bullet and go with a glass one. This one is prone to bad defects. After delivery, you have to remove 3 protective films in total. This gave me confidence the acrylic would be in good condition, but upon removing the film, it had a long diagonal streak going through the middle. I thought this was maybe a scruff from me removing the protective layer, but it was in fact between layers of the acrylic, and could not be cleaned. What more, upon cleaning with ordinary windex and a lint free cloth, the reflective material began to wipe off. Poor quality and fragile. If you get it in perfect condition, install it and don't touch it. Otherwise send it back for a replacement or shop somewhere else, because it'll damage easily.

If you are planning to size this, be aware, its brittle, not as bad as glass, but you need to score it deeply...do NOT try to cut with a saw. Also, be aware, not being glass, it scuffs and scratches easily...but...I protected mine by putting a lexan cover on it..

I had purchased this a while ago to build a magic mirror, and it worked wonderfully for the first couple months. Last week however, I noticed that the mirror has been permanently scared due to someone touching it with their hand and not immediately polishing/buffing out the mark where the person touched the mirror. I’ve attached pictures of what I’m taking about, it appears as though the residual sweat/grease from when someone touched the mirror has turned black and permanently scared the surface. Try as I may, looks it it’s been absorbed by the acrylic and damaged the reflective surface. Pretty disappointing as it was working great before this and the acrylic version are much more affordable than glass. if I had known this would be an issue in the long run I likely would have gone with a glass two-way mirror instead of acrylic ¯\_(ツ)_/¯ I imagine if you make sure to keep it super clean it wouldn’t be an issue.

Scatches unbelievably easily. Bought this as part of a touch screen magic mirror project. One swipe of my finger, nail just barely grazing it, and the coating scratched off Cleaned the mirror with a microfiber cloth and some glass cleaner and the coating came off. Super disappointed. Reached out to customer support and they're sending a replacement. Super long list about cleaning it but the bottom line is pretty much don't. Going to buy some clear film to go over the new mirror and hopefully fix this once and for all

It came days early (yay!) and is super high quality and was in perfect condition. It worked perfect for my Halloween project!

The item matches the description. For such an item, you can't ask for too much more. How well it will fit my needs is yet to be determined (40% might not be see through enough for this particular project - but that is what i ordered, i cannot complain). Meanwhile, this is the second one i ordered. The first one arrived - via international shipping - in pieces and the seller was fantastic regarding the replacement.

Biene con un film de protección por cada lado y se corta bién con una sierra de calar (velocidad lenta).

If you are a spy, you need this!

Beim Reinigen mit einem Mikrofasertuch geht die Schicht runter !!!??

Die Ware kam ordentlich verpackt, keine Beschädigungen. Der Artikel selbst ist für Halloween und IT "DIY" Projekte bestens geeignet. Zuschnitte sind möglich, konnte das selbst erfolgreich durchführen ohne das "Glas" zu beschädigen.

le coin est cassé obligé de le renvoyer pour en recommander un autre car