FLOTit 2.0 - No Beer Left Behind Floating Dip Tube with Double Filter Inlet (DFI) of 500/300 Micron for Always Clear Beer, Less Beer Waste and no Clogging. Made in USA.

The best floating pickup I've used. Expensive but worth it. Delivers clear beer right to the bottom of the keg but maturation time is still important for the best flavour; it isn't a time shortcut!

There is no better alternative. This works excellently every time. They are in all my kegs and fermentation chambers. I have bought several as back ups. They are that good.

Exactly as described, A little expensive. Should help if dry hopping. Seller was more than helpfull.

Works as advertised! I use the FLOTit 2.0 with 3L pressure rated conical fermenters. With such a low volume I need to minimise beer loss when transferring to kegs. Prior to using the FLOTit my transfers would always get clogged with dry hop remnants, with them I am able to transfer nearly everything without issue so far and no need to let any O2 into the fermenter to unblock.

Fitted in less than a minute. No faffing about. So much better than the old silicon style floats. Pulls clean beer with no air. Honestly.. dont think about it.. just buy it! I will be getting one of these for every keg. Top delivery from Amazon to UK also.

I bought a bunch of 6 gallon kegs and these floating dip tubes. I brew the beer and pump the wort right into the keg (sometimes no chill method). I ferment in the keg under pressure 5-10psi. Once fermentation is complete I move the keg to the fridge, and serve out of it. Simple and no chance of cold side O2. I'm making great beers with this method and this dip tube works great!

上澄み液を静かに移液するのに便利です。

I can confirm that no beet is left behind! At least none that you want to drink. I've been playing around with fermenting in a 6.5 gallon keg to eliminate the risk of oxygen and make my life a bit easier. so far the FLOTit is making this system work! no clogged valves, no 'ick' in my glass, and nothing but trub left in the bottom of the keg.

Very happy with this product. 5 batches in and no issues. Using it for pressure fermenting. You can tell it was made by someone who understands. Kudos!

Absolutely love this clever product...it already bailed me out of two issues that no other product could have helped with... First issue, my siphon tube was clogging up with hopps and sediment. I had to open keg several times to remove the dip tube to clear it out. Because I was concerned about contamination, I ordered this from Amazon knowing I could NOT use the tradition, standard floating ball siphon because I would have to stick my hand in the keg and make the awkward attachment from inside...(impossible when keg is filled). This entire system is connected from outside. The hose and siphon tube is made thinner to fit into posts from outside of the keg. All you need is the "hookit" tool to pull siphon hose out to connect to the Flotit (again, all from outside the keg). I just sprayed sanitizer on everything that got exposed and made all connections from the outside of keg, dropped FLOTit into the beer, sealed everything up, a few blasts of CO2 and purged out any air and all was perfect...Beer was much more clear, no sediment and tasted amazing! My second issue was that I was losing CO2 from a bad O-ring attached to the old style floating ball siphon post. This was a dilemma because the only way I could change out the O-ring was I had to free the siphon line from the post and let the ball drop off. Again, the FLOTit attaches from the outside and because the siphon tube and post are made thinner you can feed them through from outside. Again I sanitized everything, opened the ball lock, pulled out the siphon line with the "hookit tool," installed the FLOTit from the outside. I then dropped the sanitized FLOTit into the keg and sealed everything up...purged out the air, a few bursts of CO2...and all was good. Beer is much more clear, sediment free, and tasted perfect. Customer support has been amazing!!! This was a great find and clever idea!