EZ SpeedClic SC456B Metal Cutting Wheel 12-pack, 12 Cutting Wheels with 38mm Cutting Diameter for Rotary Tools

The wheels are thin but very strong and slices through sheet metal, nails, and small bolts cleanly with minimal effort. They do the job! If I had bigger jobs to do, I'd use a full-size angle-grinder but for hobby jobs, they are ideal.I have to say never use cheap knock-offs. I tried one before and it shattered almost immediately. This genuine Dremel feels solid and durable, and the EZ SpeedClic system makes swapping discs fast and easy without any extra tools.Only small thing is it wears down faster if you push too hard, but that is expected with any cutting wheel. Overall this is well worth buying if you do any metal cutting with a Dremel.

Guts through rusty bolts

These are excellent mini cutting wheels

These small cutting discs use the Dremmel quick change system and work really well and are good value for money for a pack of 10.I did however have trouble getting the discs out of the plastic holding pack until I realised you had to remove all of the excess plastic on the disc dispenser as the picturedirections seemed rather unclear. Once that was done it was easy to get them out one at a time, keeping the other discs safe and ready for use as well.

Great essential for the Dremel, I've used these to cut plastic conduit tidily & cut fibre glass car parts and to cut vents in a steel bike shed.Cutting 2x 150mm holes with some fettling aswell in a steel bike shed did kill off one of the blades, mid job but these things do it all.Good value for an on-brand product, cut very well and with the ez click system feels so much safer than the old blade mount.

These are actually great, good value for money, have bought them several times and will continue to do so. (But as per below - using them in strict caution near pets)However: IF YOU HAVE A PET BIRD PLEASE READI know there are obvious airborne toxins that most bird-owners will know.I do a lot of DIY but for anything eg paint fumes the birds go on holiday to a friend/relative for a week.Was cutting down a metal grid wire memo board with these cutting discs. Birds two rooms away, doors between me and birds were all closed, and I had the kitchen door open on to the yard and all the windows open.Then left the kitchen door closed for hours after. Also immediately deep cleaned the kitchen where is I’d been doing the two-minute job with the dremel.The birds died about 2-3 hours later.I’m in no way bad-mouthing this product but these discs are coated in fibreglass. So either trace amounts of fibreglass, or possibly just hot airborne metal fumes - in what could only have been minuscule amounts, rooms away, with multiple precautions taken, proved fatal to the birds.I think dremel are an awesome brand and will continue to buy their stuff year on year.Just thought this was worth mentioning as it hadn’t occurred to me that even trace amounts of airborne particles kicked up by these blades would prove so suddenly and dramatically fatal to birds.Just thought I’d mention this as it can be hard to get guidance on things that aren’t okay for pet birds and thought this was worth sharing.But these blades are great, good value for money, but I do find they wear out quite fast dependent on the job you’re using them on.

These discs have got me out of some very tricky problems that other solutions would have been either too large or aggressive. Cheap, last longer than you might think and so versatile.

Excellent tool highly recommend

Very good

Arkadaşlar bu diskleri kullanınca diğer disklerin ne kadar kötü oldugunu anlayacak ve bu diskten başka disk kullanmayacak siniz fiyatının kat ve kat farkını veriyor 5 taş ile kestigim malzemeyi bunun 1 tanesi ile kesiyorum ve çok hızlı kesim yapıyor düzgün kesiyor çok memnun kaldım.

Conforme à la description, bon outil de coupe

Ik ben enorm blij met de Dremel SC456B Speedclic Metalen Doorslijpschijven! Deze set van 12 accessoires is perfect voor al mijn snij- en slijpwerkzaamheden, en heeft me keer op keer verrast met zijn prestaties en gebruiksgemak.Wat me meteen opviel, is de kwaliteit van de schijven. Met een diameter van 38 mm zijn ze ideaal voor het doorslijpen van verschillende metalen materialen. Of het nu gaat om het maken van nauwkeurige snedes in metaalplaat of het slijpen van schroeven en bouten, deze schijven doen hun werk met een indrukwekkende snelheid en precisie. De duurzaamheid is ook fantastisch; ze slijten niet snel en blijven consistent presteren, zelfs bij intensief gebruik.De Speedclic technologie is een geweldige innovatie. Het wisselen van de schijven is ongelooflijk eenvoudig en snel. Geen gedoe meer met ingewikkelde bevestigingen of gereedschap! Dit bespaart me kostbare tijd, vooral tijdens projecten waarbij ik verschillende schijven nodig heb.Ik waardeer ook de verscheidenheid aan toepassingen die deze set biedt. De schijven zijn geschikt voor een breed scala aan materialen, van staal tot roestvrij staal, wat ze veelzijdig maakt voor zowel professionele als hobbyprojecten. Het is een genot om te zien hoe efficiënt ik nu kan werken met deze accessoires in mijn gereedschapskist.Het feit dat er 12 schijven in de set zitten, maakt het ook een uitstekende prijs-kwaliteitverhouding. Ik hoef me geen zorgen te maken over het snel opraken van mijn schijven en kan me volledig concentreren op mijn werk zonder dat ik constant nieuwe schijven moet kopen.Al met al ben ik zeer tevreden met de Dremel SC456B Speedclic Metalen Doorslijpschijven. Ze bieden geweldige snijprestaties, zijn gemakkelijk te gebruiken en zijn perfect voor elke klus. Of je nu een professional bent of een enthousiaste doe-het-zelver, ik kan deze set van harte aanbevelen. Een waardevolle aanvulling op mijn gereedschapscollectie!

Prisvärt.