Oregon 4.0 x 300mm Mulching Brush Cutter Blade

Do you want a blade that can take every bit of abuse? get the 4.0, Made light work of everything it touches getting the job done alot faster than you would think and went through a steel fence pin in one go as didn't see it amongst all the bushes, any other blade would have split or sent the fence pin flying, but Oregon blade just smashed clean through it with a slight nick to the blade. Only negative is the Aluminium ring it comes with to centre the blade isn't the best but it fit fine, after hitting a few hefty things it ruined the centring ring, it could do with being thicker but apart from that its flawless, blade has abit of weight to it but its what helps, was easy to fit and the blade didn't get blunt considering what its been put through, it will handle anything you throw at it with ease, buy one now and it will pay itself off in the time you save on the first job

This is a fantastic cutter, if you need brambles removed, shoots removed this does the job with ease. Fitted easily to my sthil strimmer.

Excellent blade for dealing with brambles and brush like nettles, dried bracken, young saplings etc. Beneficial to keep the blade sharp (I used a flapper disc so not to remove too much metal) and you'll work out the best way to use the blade, like twisiting the strimmer slightly on the angle when moving side to side or more of a vertical movement for the taller stuff, then running the blade over any large debris laying on the ground. I found that long thick grass can wrap around the wings of the blade and cause it to vibrate due to the weight imbalance but as soon as the blade makes contact with some brush the issue gets resolved. For what it cost, the time it saves and the end result is seriously impressive; wish I bought one years ago. Bear in mind that depending on what your cutting it can throw out some lumpy debris so protect your legs. Not ideal but I removed the guard to reduce the snagging on the brambles so if you do the same make sure you're protected.

This is a very good shredder blade, very strong and durable. The only downside is the reducer ring. I bought for a Stihl fs260, but hit a hard object and that put an end to the reducer ring. Still works on a lidl strimmer though. So I would say best for a machine with a 25.4 bore.

what a piece of equipment there was no way I was expecting it to go through so much ,it's vicious so needs respect have a Mitox 28 lh,so just needs an extra 5-10 seconds to get full revs up even with a more powerful machine the results will be the same ,just the time to get the revs up and mulches .start from the top and work down as it needs something to 'bite' on to better than a blade

What an amazing bolt on to my strimmer. We have an allotment plot where Brambles are the worst, constantly encroaching on to our plot. This thing spun up to speed on the strimmer and demolished an area of 25ft by 10ft in size in about 15 mins. It shredded the new green plant life and made short work the dead very dried out stuff beneath it. Very impressed by this tool. I did sharpen mine before first use to get the paint off the cutting blades. Highly reccommend. Advice though, make sure you buy the right size for your strimmer, I know you can get diff lengths of this tool, it is a little heavy and takes a few seconds to spin up to speed. I dont know what our strimmer is but its mounted like a backpack for me so carries a decent power.

Fitted nicely, on my Stihl FS550 it is a bit more wiggly/vibration than I would like which means I can only use it for about 30mins at a time. I might need to have a go and adjust it or fit another flat washer or something, but it is a bit frustrating. I'm not great with rotary mechanics, so it might be me. I tightened it pretty well with socket set and rubber mallet, so don't think it is slipping. The aluminium insert is fitted and is flat, but could be riding up slightly under the hollow Stihl retaining washer - hence thinking about needing a flat bit to keep it down - just a guess though.

All good thank you.

Extremely impressive solid metal bar weed-wacker. Easily takes down thumb thick woody shrubs like Lonicera and Box Elder. Easily attached to my weed-wacker pole, so compatible (just check your unit before). Bbe very careful because this thing will easily take your leg, lol; treat it with respect, lol. Very powerful for clearing woody brush, less ideal for grass, but can cut tall grass if needed. Used it for 2 seasons know and it's still going strong, the red paint on the cutting edge has worn, but it still works perfectly. This is the real deal.

Nice blade

stevig gebouwd voor het zware werk

ch habe mir dieses Oregon Universal 2-Zahn-Mulchmesser (4,0 x 300 mm) als Dickichtmesser für meine Motorsense geholt, um eine völlig überwucherte Fläche mit dicken, verholzten Brombeersträuchern freizumachen. Was soll ich sagen? Das Messer ist eine absolute Wucht! Die Materialstärke von 4 mm macht das Messer extrem robust und verwindungssteif. Wo normale Fadenköpfe oder einfache Messer kläglich versagen oder sich verfangen, schreddert dieses Mulchmesser das dornige Dickicht einfach eiskalt kurz und klein. Die Brombeerranken werden nicht nur abgeschnitten, sondern durch die spezielle Form direkt ordentlich gehäckselt, sodass man das Schnittgut danach super kompostieren oder liegen lassen kann. Es passt perfekt auf die gängigen Aufnahmen und läuft absolut vibrationsarm, sofern die Motorsense genug Power mitbringt. Wer hartnäckiges Gestrüpp und Brombeeren im Garten bekämpfen muss, macht mit dieser Profi-Qualität von Oregon absolut alles richtig. Klare 5 Sterne und eine fette Kaufempfehlung!

de detaljer som gör att kniven ska passa många trimrar saknas. enda detajen är en bricka fasttejpad på kniven