Furmax Electric Height Adjustable Standing Desk Large 40 x 24 Inches Sit Stand up Desk Home Office Computer Desk Memory Preset with T-Shaped Metal Bracket, Wood

I replaced my L-shaped desk with this desk, I think this was a good decision for work from home desk. The L-shaped desk was only 18" wide, not leaving enough space for keyboard after placing 32" monitor. Arrived on time, well packaged. Sturdy and good finish, I bought mushroom color. Very easy to assemble with one tool provided with the package. You need second person only to turn around the table, otherwise one person is enough. Top board is in two pieces but becomes quite flat hardly leaving any gap between the two pieces after assembly, see pictures. Very smooth and low-noise movement. The small wood screw heads' hardness can be improved, they tend to loose shape while tightening. These screws are used to tie the two top boards together via steel bracing plates. Some tips for assembly: 1. To avoid shearing of screw heads use the right size of the screw driver that fits well in screw heads. 2. Do not use power tools, better try with the tool provided with the package if you don't have the right screw driver. 3. The tie-in bracing plates' holes don't seem to match the pre-drilled holes in the boards, which is true. But I think this is kept purposely so that the two pieces press against each other well in the final assembly for a minimum gap. You need to work on each of the two screws progressively, do not tighten one screw fully. 4. Follow the assembly instructions specially while assembling the rotating shaft (that transmits motor torque to the other leg), which states to maintain the same height for both legs before assembling this shaft. Better you measure the height and adjust using the adjustment screws at the bottom of the legs. Overall this is a good value for money. In the past I have helped my two sons in assembling their tables, which were of course kind of custom made and much more expensive. For me this one is really a good desk.

Perfect desk for a gaming setup. I have two, 32" monitors on arms and its lifts up and down with easy. Im 6'4" and it extends high enough for me. Quality materals, took about 30 minutes to put together, good instructions. You will need a screw driver though. All this for 100 dollars?? Amazing deal.

Easy to put together. It goes up slowly and easily. It is not bumpy or rough so things dont fall when it goes up or down. I'm 5'1 and when fully raised it comes to just about my chin, so the height is amazing. It's perfect for everything. The cost was exceptional. It feels like a steal with the price I paid for it

I enjoy this desk very thoroughly, I've had it for about 2 weeks, and it's done exactly what you'd expect a standing desk to do. Let me give the pros and cons: Pros: -It can go from its lowest setting to it's highest in about 20 seconds -The box came with zip tie/command strip thingies to attach any cords to the bottom of the desk so they don't just hang -It's very spacious and sturdy enough to support a 5'9, 210 lbs man leaning on it when in it's standing position -There is TONS of leg/foot room, and you could probably even store some small objects under the desk and still have uninhibited space -Height settings make it very easy to swap between heights with just the click of a button -Price is extremely affordable -Came with an extra piece for every single screw and bolt in case one went missing Cons: -This desk REALLY likes fingerprints, much like a Tesla Cybertruck, you cannot touch this thing without attaching a perfect fingerprint on the surface. However, it's very easy to clean off with a wet wipe so it doesn't really matter -I have had a small problem with the height settings where it would sometimes wipe the height that I set it to, and I'd have to reset it, but I didn't really read the instructions too closely, so maybe that's user error -The little screwdriver they provided is kinda bad, would recommend using an actual screwdriver when assembling Assembly time was about an hour and a half, but that was after I didn't read the instructions right and installed the desktop upside down (thankfully it was a super easy fix and didn't ruin anything) so if you're more vigilant than I, it should only take about an hour and 15 minutes realistically. All in all, it's an affordable minimalistic desk that has treated me well so far, I would recommend it.

This Furmax standing desk is fantastic! The electric height adjustment is smooth and quiet, allowing me to switch effortlessly between sitting and standing. The 55 x 24-inch surface is spacious enough for my monitors, laptop, and accessories, yet fits nicely in my home office. Assembly was straightforward with clear instructions, and the desk feels very sturdy once put together. The sleek design looks modern and professional, making it a great addition to any workspace. Whether working from home or at the office, this desk has significantly improved my comfort and productivity. Highly recommend!

Normally dont leave a review that much, but this one, have too. its gold product. easy to set up and works like a charm. and am liking it so so much. the top height is fab, way more than anything else I have seen. its a steal... i took a white one. also delivery cordial, shop owner had called me to tell more about the product and confirm the color.

it came next day of ordering and i Assembled it very easy with the manual everything is good quality and as described very good product

Easy to assemble, it comes with tools and all you need is to follow the very clear instructions. Good quality, it delivers on promise.

Incredible value - my first such desk and I love it. Of course, at this price some compromises had to be made... There's no cable management, and at full height the desk shakes quite a bit. There's only two memory slots (which is fine for me, but less than other tables). The desk moves up and down at a decent speed. It isn't too loud (I don't know how loud they should be but I'm not bothered by it). So far it works great - the quality of the top table is solid - it's made of a hard (engineered?) wood - won't scratch easily. I've accidentally brushed a knife edge against it and not scratched it yet.

Motor is working fine but table top wooden is already broken