Room Stat T6360B1028

This is a basic thermostat, no frills, but still does the job. We have 7 in our home to control the various circuits for our wet underfloor heating system. They are easy to install; I just connect the wires as per the initial installation, having taken a photo beforehand for reassurance. Suffice to say they work, particularly after I have calibrated them using a more accurate thermometer - a simple task requiring taking the temperature at the same height as the thermostat, then adjusting the dial on the bezel until the temperature is accurately matched. The main failing with this item is the quality of the plastic, with me having to replace all of the dials over the 16 years we have lived at our home. The plastic seems to decay and become brittle. I had to purchase a new unit simply because the plastic pillar supporting the fixing screws fractured and the whole of the thermostat mechanism broke away, leaving the heating running continuously. Suffice to say, allowing for their faults, these units are really good and work quietly in the background without other problems. Just wished they made them out of more durable plastic.

This was a petfect replacement for ours, which was old and cracked. We have lived here for 8 years, but the house was built in the early 60s.

I was fed up with my old Honeywell 6360. The differential was 3 degrees and it never seemed to switch on without some prompting. I decided to buy a Heatmiser, as it got good reviews, but, even when set with a 1 degree differential, it rarely switched on by itself. In desperation I decided to go for a new 6360, assuming that the technology must be different after 10 years or so, and I'm so happy that I did. It is so much better than the old one and is streets ahead of Heatmiser. The only issue has been pointed out by others. The control needs to be set at 17 degrees to activate at 21 degrees. I think Honeywell need to get their act together. After all it's a really effective thermostat which can, for some, be spoilt by the lack of accuracy on the dial.

Works well, rapid Prime delivery thank you

This 'stat was simple to connect, the instructions were easy to follow and are suitable for either a replacement 'stat or a new installation. The advice as to location is sound and should be noted. Totally isolate your boiler before you start - I took the plug out of the socket and go ahead with your wiring. I found it easy using four core flexible cable so only 'one cable run rather than three core and a separate earth. Particularly good value and great if you don't need the sophistication of a wifi system.

In a world of app connected expensive thermostat, this is a great, simple, thermostat. It's obviously not a programmer but if you want a secondary temperature control around the house, or want just a thermostat, then this is for you. Easy to connect in and nice and durable. If you want the cable going out the side you'll need to cut a notch into the side wall. Simple turn control for setting the temperature.

Exact replacement for our 20+ year old Honeywell thermostat, which was recently broken by someone knocking into it. The construction and wiring are identical to the previous one, so it is very easy to connect, and it basically works BUT there are two problems. 1. The new one is not quite the same size so it does not precisely in the housing. Quite a minor point to be honest, since you can use the new housing supplied. 2. More importantly, the point at which the heating is switched off when the temperature is increasing seems about 4 degrees higher than the point at which the heating is switched on when the temperature is decreasing. This makes it seem very insensitive to temperature. Haven't had any really cold days yet this winter so not sure how much this will affect the functioning of the heating system but it does not inspire confidence.

This was bought to replace the old hall thermostat, which was basically an earlier version of this one by Honeywell. It had paint splashes on from a previous owner's DIY efforts, and was a hideous mushroom colour - it had to go when we redecorated. It is a simple but effective mechanical thermostat, so does not actually need a neutral connection like purely electronic ones do - i.e. it can be used with 2-wire cables as well as 3. However, if you have a simpler heating system with just the one stat for the whole level, and no individual radiator or room stats, it is desirable to have a neutral connection as the 'anticipator' device will reduce overshoot. The cable to our stat in the hall has only 2 wires and it was not practical to rewire without major disruption, but as we have individual radiator stats in every room. the hall stat is pretty much redundant and is normally left on max

Da unser Thermostat nach fast 10 Jahren den Geist aufgegeben hat, haben wir das gleiche Modell bestellt und hoffen auf die nächsten 10 Jahre ;) Alles wie erwartet zügig und problemlos verlaufen. Dankeschön !!!

Queríamos un termostato sencillo y de buena calidad y éste cumple con creces. Es más se pone en funcionamiento la calefacción antes que con el digital que tenía antes. Se trata de un buen fabricante y se nota en la calidad de los componentes.

Prodotto preso per sostituire il mio precedente termostato. Buon acquisto. Consigliato. Spedizione arrivata prima del previsto.