Question 1

does this have two component you have to mix together in the can by use of two triggers on can?

Accepted Answer

Yes, so simply activate the can using the cap located at the bottom and shake well for two-three minutes before use. The activated can will the persist in even coverage for a thick even coat. Warning once activated the contents must be used! It was perfect for respraying a section of my car. For best results after use, wet sand surface then buff to remove any imperfections in the dried coat.

Question 2

Can this be applied over polished aluminium?

Accepted Answer

Further to my original answer, is there any reason why you can't key the aluminium surface with 800-grit wet and dry before spraying?  The lacquer will fill in the scratches the abrasive paper makes and the surface will look like shiny aluminium once sprayed over with this lacquer.  Just in case you don't know, keying a surface is to give it a complete light sand all over with a fine grit size abrasive, such as 800-grit wet and dry paper.  This provides a complex surface with increased surface area to help hugely with coating adhesion.  Even with car spraying, you can let the base colour dry (which will look like a really shiny, smooth surface) then sand it all over with 800-grit to scuff the surface and wash the dust away.  The car then looks awful!  But the final stage of lacquer flows into all the scratches made by the wet & dry sanding stage and the surface finish is restored back to super smooth and shiny but with the benefit of the hard 2K lacquer layer.  You can polish the lacquer layer further once it is dry (24 hours).

MY ORIGINAL ANSWER:

You *may* experience balling-up of the lacquer as with many other products directly onto a shiny surface. It really is best to key the surface to avoid this. To get away with it, use *extremely* light coats as if you are putting on hair-spray - just a quick spray and fast hand motion unit there is visible lacquer spray all over. You may need to do SEVERAL VERY LIGHT COATS until the can is exhausted with say 10 minutes in between each one. I can't stress enough - very light coats and don't worry if you don't coat all over with one spray. Wait, then do some parts you've missed, then go back and start again over the top, and so on. Your final result, dry after 24 hours or perhaps longer in these winter temperatures, could then be abraded with wet-and-dry paper (800 grit to 1200 grit and possibly use with copious amounts of water on the wet and dry paper and the object to get a smoother sand). You an finish at an even higher grade 1500-2000 but at some point you could revert to something like autoglym super-resin polish to get a bright, super-smooth final finish.

Question 3

Can this clearcoat be used over a vinyl wrapped motorcycle helmet

Accepted Answer

Yes

Question 4

Why is the delivery cost so high on this product ?

Accepted Answer

Hi, in our case the delivery cost is quite high as the item is shipped from Spain and there is a there is a fix price/weight range until 2kg. Any doubt please contact us. Kind regards

ASIN	B003VDXZM8
Brand Name	SprayMax
Colour	Clear
Colour Code	#FFFFFF
Container Type	can spray
Coverage	Approximately 0.55 yrd (0,5 m) ² - 1.09 yrd (1 m) ² per spray can
Customer Reviews	4.6 4.6 out of 5 stars (1,260)
Dry Time In Hours	10
Finish Type	High-Gloss
Full Cure Time	48 Hours
Global Trade Identification Number	04015962853263
Included Components	Sprayer
Indoor Outdoor Usage	Outdoor
Is Waterproof	False
Item Form	Spray
Item Volume	400 Millilitres
Item Weight	0.48 Kilograms
Manufacturer	SPRAYMAX
Model Name	Spruzzare Max
Paint Type	Tempera
Part Number	680061
Size	400 ml (Pack of 1)
Special Features	Scratch Resistant
Specific Uses For Product	Interior/Exterior
Surface Recommendation	Metal, Plastic
Unit Count	400 millilitre
Water Resistance Level	Waterproof

Original SprayMax 2 K Scratch-Proof gloss varnish Benzinfest 680061 UV 400 ml

Details

Details

Description

Specifications

Common Questions