VPPD-S Guitar Pedal Board with Built-in Isolated Power Supply

This board fits three of my Boss "standard" pedals and one "narrow" noise gate pedal perfectly. If you only have full size, "standard" pedals, three is probably the limit. You could squeeze four on here, but cable connections might be iffy. Some reviews mention the LED display being a distraction, but there is a brightness knob to adjust that. It is light-weight, sturdy, and well made. I am very happy with the purchase.

Have to give this a five star so far. It is great for busking and probably would accommodate 4-5 pedals providing a couple of them are small. It is very convenient to have isolated power for each pedal and this unit works well to keep it all together neatly. The velcro holds pedals securely allowing for multiple pedal arrangements. The pass through works well with low noise. So far the unit is solid, made of aluminum so it doesn’t add much weight for transport. The case provided allows for safe storage and transport. It accommodates the board with pedals nicely. The power supply has a long cord to minimize tangle. Love this unit so far.

What I like: 1. Solid build. 2. Came with the cables needed. 3. Size is convenient. 4. LED VU Meter 5. The Power Cable length is good. 6. Was able to fit my Cry Baby on it. 7. Velcro is extremely strong; your pedals will not fall off during travel or grab the board in a rush. 8. I did not notice any difference in noise feedback, which is good. 9. The price was great! (I almost bought the Vangoa power supply, then found this board with the power supply in it.) What I dislike: 1. LED VU Meter doesn't have proper range. Touchy, it goes from nothing to 95% with 1/12th turn. (I have not tested the input-output on the board yet, but I probably won't, just to avoid using more cables and fewer chances of noise/feedback. But I don't know if this is better actually for noise reduction). 2. Velcro is stronger than the adhesive. 3. Velcro is so strong that it bent the bottom metal of my Cry Baby and pulled off the plastic battery cover. 4. The legs collapse a little too easily. Tips: 1. You will need a spatula to remove the pedals. DO NOT try to pull them off. 3. If you have a full-size Cry Baby, place it lower so the feet of the Cry Baby rest on the floor. This makes the board less likely to tip forward when pushing to click on the Cry Baby. 4. If you want a Cry Baby, spend the extra $30 for the smaller model; it will fit better. 5. Leave some space between your petals, enough to remove an audio plug if needed. What could have been better: 1. Standard Velcro usually has plenty of strength. 2. Slightly wider bag with a styrofoam block that can be cut to fit a full-size Cry Baby Pedal better and protect the board and petals. The styrofoam that came with it would have been helpful for this purpose, but it was not wide enough to protect a Cry Baby Pedal. 3. Including a flat plastic hand spatula to move/remove the pedals. 4. Slightly thicker rubber feet on the bottom mount for stabilization and less chance of the board sliding. 5. A rigged in the Legs mechanism that snaps them into position. Summary: Worth it! Happy with it!

Great sturdy pedalboard with a nice LED effect and built-in power supply. This fits a decent amount of pedals in a small form factor, making it very easy to bring around with you to gigs. The audio-based LED lights on the front are a really nice touch, the built-in power supply doesn't cause interference, and it also saves you money on having to buy a power supply. I definitely like this pedalboard.

I was so excited to find an affordable pedalboard-power supply combo board like this out there. Coming from a ziptie-based Holeyboard to velcro, I gave this a shot. It cost less than my Walrus Audio Aetos power supply, and yet covered my needs equally as well (since I don't use anything other than standard 9v pedals). Minor gripes: the light bar is gimmicky, ymmv but I turned it off immediately (grateful I can). Also do yourself a favor and buy additional velcro tape with this, as others have said it comes with less than I needed. Downsides out of the way, it's awesome. This board has handled 18 months of use at home, band practice, and at small shows flawlessly. Well built and great value for a no-name brand. It's the perfect size for the number of pedals I use, and the carrying case is really nice. 5/5.

Excellent pedal board. I bought two of them and lined them up. Perfect for keeping your pedals and organized and streamlined. I might even buy one more.

When I ordered this board I was hopeful. I play acoustic guitar and so I only have 3 pedals (Baggs Voiceprint DI, Tuner, AB Switcher for multiple guitars). A large pedal board isn’t needed and the smaller ones usually don’t have much, if any room underneath for a power supply. So, this thing checked all the boxes. It’s was small and compact, and was powered. Perfect right?! Wrong. I played 3 gigs with this pedal board. I’m not rough with musical gear so nothing was dropped or thrown around. This is how I make my living. After the first show I noticed a slight hiss in my monitor but thought it was probably the speaker. It’s old. Second show, hiss is worse so I try to find the problem, in vain, because I was sure it was anything but my pedal board or pedal. Third gig was a full band show and instead of a wedge, we used ears. This time the hissing was AWFUL! Went through the board and started muting channels. Sure enough. Acoustic! So I thought ok. Must be this pedal board. So I grabbed the Baggs’ original power supply out of my bang and went for the work around. Nope pedal still hissing. Suffered through the gig, came home and ran tests and contacted LR Baggs. Pedal is bad! So a $90 pedal board cost me a $400 pedal. 10/10 WOULD NOT RECOMMEND. Sending pedalboard back for refund and contacting the company directly to request they replace my LR Baggs. BUYER BEWARE. THIS THING IS JUNK.

Fantastic pedal board. From the internal power, to the tilt back flip down legs, to the convient on off switch everything was thought out in its design. I now have 3 of them and have bought one as a gift to a buddy guitar player

Mycket bra pedalbord. Allt är enkelt att packa ner i den högkvalitativa väskan och enkelt att sätta upp och börja spela.

Ótimo produto, firme e bem acabado, e como se pode ligar os pedais direto na fonte interna da board a instalação fica mais limpa. Só se o pedal ou pedaleira tiver uma demanda maior, até 300ma por aparelho ela entrega. Vem também com uma capa muito bacana para transporte.

Es mejor de lo que esperaba, su fuente interna alimenta mis 3 pedales de 9V perfectamente, tengo compresor, overdrive y distorsión y ningun minimo ruido, todo perfecto, compacto y practico. Lo volvería a comprar y lo recomiendo sin ninguna duda.

È fatta molto bene, un oggetto piacevole anche solo alla vista e al tatto. Il sistema di alimentazione è valido. Nessun disturbo. L'alimentatore è da2,5A quindi alla spina singola c'è ben più di 100mA. Innovative le prese integrate e nascoste sotto scocca. I connettori in dotazione, angolati a entrambe le estremità. È leggermente angolata e i piedini aumentano l'inclinazione, accessorio gradito. L'alimentatore ha il cavo lunghissimo. Velcro partocolare, di qualità. Fa più presa dei classici velcro stripes. Una volta appoggiato il pedale non si muove più, e non dondola come capita con i velcro più lanugginosi La cosa dei led carina ma trascurabile. Avrei preferito che i jack sul fronte fossero riportati sul sotto scocca insieme alle alimentazioni, in modo da precablare tutti i pedali anche all' ingresso e uscita finale in maniera da gestire il collegamento dello strumento e all' ampli/PA direttamente dal pannello pedaliera e non sui pedali direttamente . La custodia molto bene imbottita. Ci stanno 5 pedali standard se utilizzando connettori non troppo grossi. È molto leggera, il prezzo è elevato...ma con un sistema di alimentazione apparentemente valido e integrato sarebbe invece conveniente. Io collego pedali digitali e analogici insieme e non ho ronzii. Il manuale specifica come i polo di alimentazione siano isolati

Really happy with this board for my fly rig - I don’t use the reactive colours but it’s brilliant for compact power distribution (the power will distribute across all the pedals so fine u less you’re putting some serious power sappers on there)