Herculiner HCL1B8 Brush-on Bed Liner Kit, Black

I’m not a cheap guy, but I decided that I’d give this a shot before taking my truck for a spray in liner at Line X. I ordered the Herculiner kit and received it the next day. I also bought a nylon wheel attachment for my drill for the scuffing process. It took me approx an hour and thirty minutes to scuff the bed and tail gate. Another 15 mins to tape and about 30 minutes to prep and clean the surface. It took about 30 minutes to put the first coat down and it was a really easy process between the roller and brushes. I used a paint mix attachment for the drill and that made mixing super easy. It would have been tough doing it by hand. It took the better part of 6 hours to to get to the point where it didn’t feel tacky, but I wasn’t able to stand on it until approx 8 hours had passed. The second coat went on equally as easy and I let that coat dry overnight. It looks great and is much grittier than the Line X spray liner I had on my last truck. I’m 100% satisfied with this product and my only recommendation would be to find a second similar roller as the first one did begin to break down midway through the second coat. HIGHLY RECCOMEMD!!!

This worked great and saved a ton of money. Not sure what paying a company to spray your bed goes for but i know at least $1,000 like 10 years ago. Probably double that today. Block out an entire day, wake up early, have lots of rubber gloves, knee pads, sanding gloves (harder tip protection), acetone bottle and some extra rollers, paint trays and brushes cant hurt. I used what came with the can, the sand paper, rollers and brushes and it turned out great but the paint brush and rollers hardened after the first coat. Was able to get 2 coats with one can and had a little left over. They make a spray on bed liner than you can use for touch ups over the years or to get spots you may have missed or better straight lines. My only issues were caused by my impatience, not taping off properly and not anticipating the drips. Even though it is thick, its runny when you first opem the can. If i could go back and do it again, i would have used a wooden spoon or cheap long instrument to scoop the thick grit from the bottom of the can and mixed it in the tray with the rest that i poured out. On my last coating it thickened up substantially with a lot more grit than it initially had. First layer was more clear and runny black like water color paint in some spots but as it dried i went back over it, prior to doing the 2nd coat. I lathered this stuff on THICK as well. However, i have a 2024 Colorado with a 5ft x 5ft bed. Use that info to help you plan better for your ride, maybe youll need a spray can to help you finish out or buy another can. All in all, great product. Cheap and reliable so far. No chipping or cracking and it looks great (when its cleaned😂) i’ve been camping several times, turned the back into a pool on the 4th of July and hauled a ton of furniture, wood and a few dump runs and just took the photos after all that. It looks pristine when its cleaned. Everyone has said it looks professionally done

لم يكمل سنه وبدأ يتقشر ويذهب الطلاء.

Super great! I’m so happy with it! Looks great, amazing texture and thickness, it adheres extremely strong! I haven’t had any scratches or issues with it either. The texture is very grippy too. My advice! 1. Prep really well, I sanded everything, blew out the debris with a blower and cleaned everything with purple degreaser and then acetone. This step is extremely necessary. 2. Next I opened the can, which was completely normal, not sure why people struggled just remove the clips and use a flathead screw driver. Don’t shake the can, you need to mix it with a paint mixer attachment 3. I found that the rollers broke very easily, so after they broke, I just used the paint brush it came with and I had much better results. I did each layer a day apart due to work, and I did 2 layers. It laid very thick and nice with the brush, and I was able to cover every inch in my Chevy s10 long bed. This bed is about 90 inches or so and i still had some product remaining after a generous thick coat

I read several reviews recommending watching application videos before hand and I totally agree with that. Product goes on really well and seems durable, but I’ll have to wait and see. I also recommend wearing gloves and clothes you’re OK with disposing with afterwards. This stuff really doesn’t come off skin or clothing easily. Overall, satisfied with the results and would recommend.