J Hooks with Resin Pad

I decided to get some accessories to compliment my Hulkfit power rack. I picked up 2 pairs of the plate holders and a pair of safety bars. They all fit my rack great and are very sturdy. Each of them do come as a pair which is great, making them very affordable. The only thing with the plate holders is that you have to carefully consider where you want to place them on your rack because you can block your DIY cable set up (if you decide to go that route) or if you choose to squat inside the rack, when you load up your plates on the plate holders, because of the diameters of the bumper plates, they can get in the way of your squat. That was one of the reasons I decided to get the safety bars so I can comfortably squat outside of my rack as well. The addition of the plate storage and plates also helped immensely in increasing the stability of my rack. There is much less swaying, making the overall rack very sturdy.

Priced fairly ,Perfect fit ,works great ,great quality.great addition to home gym .glad I purchased this !!

Arrived quickly (2 days), had all parts but was chipped pretty bad, though thankfully no dents. My big issue is it states the lever arms are 39" long; they are not. The lever itself is less than 32 inches. I'm pretty certain even including the rack attachment it's not 39 inches. This severely limits your range of motion, especially since the lowest the handles can be set is 3-4 inches from the bottom, cutting it down to 28in. I guess they're making them different now because they were longer in pics from customer reviews a couple years ago. They are much shorter now and I would not have gotten them if I'd known. They're okay for some exercises but definitely won't do for others. And if they were longer you wouldn't have to remove the whole thing to change some positions, just the handles. Debating returning them but I don't think there's any other options that can fit my rack but again, I'm pretty limited if I keep them. Btw I have a BalanceFrom power cage from walmart and these fit perfectly if anyone else is wondering. Another issue is the edges are sharp and I about really hurt my hands trying to take it off and move it to another position. My tip is to push the peg in with one hand as you're CAREFULLY removing it. They were staying stuck on and I was pulling pretty hard and then they fly out with all that weight and sharp edges, not pretty. But comes out pretty easily if you're guiding the peg. All that said, they are sturdy and function well, would be a great product if it were only about a foot longer. The plate holders are much better than I thought. 5 stars for these. I was expecting 8in from the listing picture but it's actually 11 and again, fits my BalanceFrom cage perfectly, which is very hard to find attachments for. I could probably hold all my plates on these but will probably get another set for smaller plates so as to not have to keep removing them to get to the bigger ones. Very happy with these!

The Hulkfit weight plate holders are a great storage solution for my home gym. I needed something that wouldn’t take up a lot of room, so being able to store my plates right on my rack has been an ideal way to keep them off the ground. They seem strong and well built. The finish is really nice and seems very scratch resistant. They are also a little longer than others I’ve seen so they can hold more plates. All in all, great buy, solid product and really can’t beat the price on these. I have a few other Hulkfit products and have always been happy with quality and price.

Worked great.

This is the piece of kit I knew i need but once I got it there are endless potential and possibilities. It great for many different lifts that I would not do without a spotter. This product is well made and durable quality support more weight than I will be lifting at this time. Very adjustable to increase range of motion.

This review is for the HulkFit weight holders. I’ve noticed amazon tends to group all HulkFit reviews into one mass reviews so hopefully this will clarify what I am reviewing. After singing praise for the HulkFit power rack I am sorely disappointed when it comes to the HulkFit weight holders. Like others have stated good weight holders will have a slight angle upward to ensure weights don’t slide off. However these weight holders are straight and flat no angle at all to them, I would be super leery putting these high up on my power rack as such I have them on the 2nd to lowest space near the bottom of the rack. Now I am not one to really care about looks, since the whole purpose of these are to hold heavy weights, but man the welds and QC on these weight holders are terrible. On the lip of one weight holder there is a bump of metal, doesn’t really prevent me from racking my weights but it sure is an eye sore. Also there are poor welds, scratches all up and down the weight holder peg itself just not fun to look at. Fundamentally though do these things do their job? Yes they hold the weights in place and for that I will give 3 stars. However having bought and used the Yes4All 2x3 weight holder, man the Yes4All is just heads and tails better than the HulkFit in terms of usage, aesthetic, etc. I’ve included photos of the HulkFit and Yes4All so you can see the differences between the 2. Yes4All weight pegs aim up and have a rubber ring to prevent plates from hitting flat against the rack but the pole/sizing is not perfect for the rack. HulkFit pegs are straight, aesthetically not appealing, but the sizing fits the rack perfectly and does the job. What I find helpful for the HulkFit weight holder is taking a piece of plastic and placing it under the weight pegs to give it a slight angle upward. Overall if you need weight pegs and want the right hole/sizing for your power rack get these but understand there’s a lot of flaws. Amazon messed up my photo upload for some reason so here's what they are: Photo 1 - Metal bump on the lip of the HulkFit weight holder Photo 2 - HulkFit weight holder with a UHMW plastic underneath it giving it an upward angle Photo 3 - Bad welds/scratches on the HulkFit weight holder Photo 4 - HulkFit weight holder with a UHMW plastic underneath it giving it an upward angle with a Bumper Plate in it Photo 5 - Yes4All 2x3 weight holder, you can see that the sizing is off since it doesn't go across the entire rack frame but the peg angles upwards and there's a black plastic ring protecting the rack Photo 6 - UHMW plastic I placed underneath the HulkFit weight holder Photo 7 - HulkFit weight holder and how straight/angled slightly down the weight holder is

Fit well to my 2.3” cage. Seem to be sturdy but haven’t really put a lot of weight in them yet. Do be careful with screw heads for the pads. Two of my screws were not tightened enough so they protrude out the surface and marred my barbell. Get a large Philips screw driver and tighten up the screws before using.

Exactly what I was after. Perfect fit, padded interiors so they don't rattle around or scratch the cage. Highly recommended

Sarebbe stato meglio dare la possibilità di scegliere la lunghezza della cinghia

Its strong

Passt perfekt auf meinen Power Rack und meine Plates sind gut verräumt.